Browse > Article
http://dx.doi.org/10.12989/sem.2014.51.6.973

Factor-analysis based questionnaire categorization method for reliability improvement of evaluation of working conditions in construction enterprises  

Lin, Jeng-Wen (Department of Civil Engineering, Feng Chia University)
Shen, Pu Fun (Program in Civil and Hydraulic Engineering, Feng Chia University)
Publication Information
Structural Engineering and Mechanics / v.51, no.6, 2014 , pp. 973-988 More about this Journal
Abstract
This paper presents a factor-analysis based questionnaire categorization method to improve the reliability of the evaluation of working conditions without influencing the completeness of the questionnaire both in Taiwanese and Chinese construction enterprises for structural engineering applications. The proposed approach springs from the AI application and expert systems in structural engineering. Questions with a similar response pattern are grouped into or categorized as one factor. Questions that form a single factor usually have higher reliability than the entire questionnaire, especially in the case when the questionnaire is complex and inconsistent. By classifying questions based on the meanings of the words used in them and the responded scores, reliability could be increased. The principle for classification was that 90% of the questions in the same classified group must satisfy the proposed classification rule and consequently the lowest one was 92%. The results show that the question classification method could improve the reliability of the questionnaires for at least 0.7. Compared to the question deletion method using SPSS, 75% of the questions left were verified the same as the results obtained by applying the classification method.
Keywords
construction enterprise; expert system; factor analysis; questionnaire categorization; reliability improvement; working condition;
Citations & Related Records
Times Cited By KSCI : 10  (Citation Analysis)
연도 인용수 순위
1 Alexander, B., Monika, H., Benjamin, U., Alexander, H. and Reto, B. (2010), "Classification systems for tibial plateau fractures; Does computed tomography scanning improve their reliability", Injury, 41(2), 173-178.   DOI
2 Balling, R.J., Briggs, R.R. and Gillman, K. (2006), "Multiple optimum size/shape/topology designs for skeletal structures using a genetic algorithm", J. Struct. Eng., 132(7), 1158-1165.   DOI
3 Chen, C.Y., Chen, Y.H., Yu, S.E., Chen, Y.W. and Li, C.C. (2012), "An integrate information technology model during earthquake dynamics", Struct. Eng. Mech., 44(5), 633-647.   DOI
4 Cheng, H., Fan, W., Yan, X.Y. and Philip, S.L. (2009), "Method and apparatus for structural data classification", United States Application US20090319457.
5 DeVellis, R.F. (1991), Scale Development Theory and Applications, Sage, London.
6 Chiou, D.J., Hsu, W.K., Chen, C.W., Hsieh, C.M., Tang, J.P. and Chiang, W.L. (2011), "Applications of Hilbert- Huang transform to structural damage detection", Struct. Eng. Mech., 39(1), 1-20.
7 Chokshi, D.S., Makwana, A.H. and Pitroda, J. (2013), "A preliminary study on importances of fly-ash bricks and clay bricks in construction industry through SPSS software", Int. J. Civil, Struct., Envir. Infrastr. Eng. Res. Develop., 3(5), 127-134.
8 Chung, J.H., Consolazio, G.R., Dinan, R.J. and Rinehart, S.A. (2009), "Finite-element analysis of fluid-structure interaction in a blast-resistant window system", J. Struct. Eng., 136(3), 297-306.
9 DeVellis, R.F. (1998), Scale Development: Theory and Applications, Sage, CA.
10 Drissi, Y. and Vilalta, R. (2011), "Methods and apparatus for generating a data classification model using an adaptive learning algorithm", United States Patent US7987144.
11 Folino, G., Pizzuti, C. and Spezzano, G. (2006), "GP ensembles for large-scale data classification", IEEE Tran. Evol. Comput., 10(5), 604-616.   DOI
12 Grierson, D.E. (1992), "A knowledge-based expert system for optimal structural design", Optimization and Artificial Intelligence in Civil and Structural Engineering, Springer Netherlands.
13 Hackman, J.R. and Oldham, G.R. (1975), "Development of the job diagnostic survey", J. Appl. Psychol., 60, 159-170.   DOI
14 Hurtado, J.E. and Alvarez, D.A. (2003), "Classification approach for reliability analysis with stochastic finite-element modeling", J. Struct. Eng., 129(8), 1141-1149.   DOI   ScienceOn
15 Jia, L. and Kuwamura, H. (2014), "Ductile fracture simulation of structural steels under monotonic tension", J. Struct. Eng., 140(5), 04013115.   DOI
16 Koike, T., Maruyama, O. and Garciano, L.E. (2007), "Ground strain estimation for lifeline earthquake engineering", Struct. Eng. Mech., 25(3), 291-310.   DOI
17 Jia, L., Koyama, T. and Kuwamura, H. (2014), "Experimental and numerical study of postbuckling ductile fracture of heat-treated SHS stub columns", J. Struct. Eng., 140(7), 04014044   DOI
18 Juaim, M.N. and Hassanain, M.A. (2011), "Assessment of factors influencing the development and implementation of the architectural program", Struct. Sur., 29(4), 320-336.   DOI
19 Lin, J.W. (2001), "Adaptive algorithms for the identification of nonlinear structural systems", Ph.D. Dissertation, Columbia University, New York.
20 Liang, Q.Q. (2007), "Performance-based optimization: a review", Adv. Struct. Eng., 10(6), 739-753.   DOI
21 Lin, J.W., Chen, C.W. and Hsu, T.C. (2012), "Fuzzy statistical refinement for the forecasting of tenders for roadway construction", J. Marine Sci. Tech., 20(4), 410-417.
22 Lin, J.W., Chen, H.J. (2009), "Repetitive identification of structural systems using a nonlinear model parameter refinement approach", Shock Vib., 16(3), 229-240.   DOI
23 Lin, J.W. (2010), "Mode-by-mode evaluation of structural systems using a bandpass-HHT filtering approach", Struct. Eng. Mech., 36(6), 697-714.   DOI
24 Lin, J.W. (2011), "A hybrid algorithm based on EEMD and EMD for multi-mode signal processing", Struct. Eng. Mech., 39(6), 813-831.   DOI   ScienceOn
25 Lin, J.W. (2012), "Fuzzy regression decision systems for assessment of the potential vulnerability of bridge to earthquakes", Nat. Hazard., 64(1), 211-221.   DOI
26 Nunnally, J.C. (1978), Psychometric Theory, 2nd Edition, McGraw-Hill, New York.
27 Lin, J.W., Chen, C.W. and Hsu, T.C. (2013), "A novel regression prediction model for structural engineering applications", Struct. Eng. Mech., 45(5), 693-702.   DOI
28 Morone, D.J., and Sezen, H. (2014), "Simplified collapse analysis using data from building experiment", ACI Struct. J., 111(1-6), 925-934.
29 O'Connor, A., Pedersen, C., Gustavsson, L. and Enevoldsen, I. (2009), "Probability-based assessment and optimised maintenance management of a large riveted truss railway bridge", Struct. Eng. Mech., 19(4), 375-382.
30 Morshed, R. and Kazemi, M.T. (2005), "Seismic shear strengthening of R/C beams and columns with expanded steel meshed", Struct. Eng. Mech., 21(3), 333-350.   DOI
31 Park, S., Kim, Y.B. and Stubbs, N. (2002), "Nondestructive damage detection in large structures via vibration monitoring", Electr. J. Struct. Eng., 2, 59-75.
32 Porro-Munoz, D., Duin, R.P.W., Talavera, I. and Orozco-Alzate, M. (2011), "Classification of three-way data by the dissimilarity representation", Sig. Proc., 91(11), 2520-2529.   DOI
33 Rezakhani, P. (2011), "Fuzzy risk analysis model for construction projects", Int. J. Civil Struct. Eng., 2(2), 516-531.
34 Schleif, F.M., Thomas, V. and Matthias, O. (2009), "Supervised data analysis and reliability estimation with exemplary application for spectral data", Neurocomput., 72(16-18), 3590-3601.   DOI
35 Shih, B.Y., Chen, C.Y. and Su, W.L. (2012), "Construct OCR on mobile mechanic system for android wireless dynamics and structure stabilization", Struct. Eng. Mech., 42(5), 747-760.   DOI
36 Sun, Z. and Chang, C.C. (2004), "Statistical wavelet-based method for structural health monitoring", J. Struct. Eng., 130(7), 1055-1062.   DOI   ScienceOn
37 Xu, Y. and Chen, J. (2012), "Fuzzy control for geometrically nonlinear vibration of piezoelectric flexible plates", Struct. Eng. Mech., 43(2), 163-177.   DOI
38 Yang, J. and Soh, C.K. (1998), "Discussion of genetic algorithms-based methodologies for design optimization of trusses", J. Struct. Eng., 124(8), 980-981.   DOI
39 Tseng, V.S. and Lee, C.H. (2009), "Effective temporal data classification by integrating sequential pattern mining and probabilistic induction", Expert Syst. Appl., 36(5), 9524-9532.   DOI
40 Will, T.M. and Powell, R. (1991), "A robust approach to the calculation of paleostress fields from fault plane data", J. Struct. Geol., 13(7), 813-821.   DOI
41 Widaman, K.F., Grimm, K.J., Early, D.R., Robins, R.W. and Conger, R.D. (2013), "Investigating factorial invariance of latent variables across populations when manifest variables are missing completely", Struct. Eq. Model.: A Multidisc. J., 20(3), 384-408.   DOI
42 Kim, C.W., Kawatani, M., Ozaki, R. and Makihata, N. (2011), "Recovering missing data transmitted from a wireless sensor node for vibration-based bridge health monitoring", Struct. Eng. Mech., 38(4), 417-428.   DOI