• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.436-442
• /
• 2009

This paper describes a study on the design of compact polymer bushing with inner control shield. In the bushing, a high electric stress occurred between field shaper and central conductor by the closely space. Also coaxial cylindrical shield has a great height along the axis to control an electric field. Consequently, all the potentials are raised axially along the field shaper and electric stress is concentrated on a part of the surface of the FRP tube near the upper end of the field shaper. In accordance, the field control can be achieved by means of the designs of such inner control shields. The floating and ring shield designs was decreased electric field concentration at critical parts of the bushing. The shield gaps is formed between field shaper and ring shield. Accordance equipotential lines extend through gaps. As a result, the resulting electrical stress are thus reduced in the range $17{\sim}23%$ in the bushing with floating and ring shield designs. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing. The optimized design uses internal elements for electric stress grading at critical parts of the bushing.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.726-734
• /
• 2012

In this paper, a practical warhead tracking filter is proposed for developing a FMCW (Frequency Modulation Continuous Wave) seeker with anti-ballistic missile capability. For reliable warhead tracking, the measurement originated from the warhead section of a ballistic target should be separated from other measurements. Futhermore, since the FMCW seeker is based on triangular frequency modulation, the multiple measurements obtained in different chirp periods should be properly associated. As a systematic way to solve the problem, the measurement pairing problem under cluttered environment is reformulated as a data association filtering problem and the PDA (Probabilistic Data Association) scheme is applied. The proposed warhead tracking filter provides better warhead tracking performance compared to the conventional range tracking algorithm and nearest neighbor warhead tracking filter. The effectiveness and reliability of the proposed method are verified using the FMCW seeker simulator.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.385-388
• /
• 2001

In this paper, the gearless traction machine drive system using a permanent-maget motor for high-speed elevators is addressed. This application of permanent-magnet motor to the elevator traction machine enables several improvements including higher efficiency, better ride comfort, smaller size and weight, and so on. PWM boost converter is also adopted so that DC-link voltage regulation, hi-directional power flow, and controllable power factor with reduced input current harmonics are possible. To increase reliability and performance, the control board, which can include the car and group controller as well as PWM converter and inverter controller, is designed based on TMS320VC33 DSP The simulator system for high-speed elevators has been developed so that the drive system of high-speed elevator can be tested without my limitation on ride distance and the load condition. Some experimental results are given to verify the effectiveness of the developed system.

• 한국정보통신학회논문지
• /
• 제19권7호
• /
• pp.1561-1567
• /
• 2015

모바일 애드혹 네트워크의 노드는 일반적으로 에너지의 용량이 제한된 배터리를 사용한다. 경로의 안정성을 유지하기 위해 균형 잡힌 에너지 소비가 중요하다. 본 논문에서는 애드혹 네트워크에서 데이터 전송 경로의 안정성을 향상시키는 것을 목표로 한다. 이를 위해 데이터를 전송할 수 있는 최단 전송 경로 중에서 노드 에너지 잔량의 최소값이 가장 큰 경로를 선택하는 새로운 라우팅 프로토콜을 제안한다. 에너지 잔량의 최소값이 가장 큰 경로는 다른 경로보다 상대적으로 긴 수명을 갖게 되어 데이터 전송에 안정성을 향상 시킬 수 있다. NS-3 시뮬레이터를 사용하여 제안하는 라우팅 프로토콜이 AODV와 EA-AODV보다 수명이 긴 안정적인 경로를 제공하는 것을 확인한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.504-505
• /
• 2014

In this paper, by using hardware in the loop(HIL) of the EES, which is an inverter of high-rated technique and analyze the function. By exchanging information between the simulation and system controller to be used in a live system, HIL approach, approach experimental is used to interpret the system mass analysis is not possible in a real system some. This paper presents the implementation of the EES and the RTDS DSP28335 is a real-time connection to the electrical signal, and to verify the actual system is difficult, it was possible to analyze the performance of the system. Thus, it is expected to contribute I raise the stability and reliability of the operation during the actual EES is built.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권12호
• /
• pp.3081-3099
• /
• 2012

We propose a new multipath-based reliable routing protocol on MANETs, Multipath-based Reliable routing protocol with Fast-Recovery of failures (MRFR). For reliable message transmission, MRFR tries to find the most reliable path between a source and a destination considering the end-to-end packet reception reliability of the routes. The established path consists of a primary path that is used to transmit messages, and the secondary paths that are used to recover the path when detecting failures on the primary path. After establishing the path, the source transmits messages through the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to locally recover the route failure, the proposed protocol can handle the dynamic topological change of the MANETs efficiently. The simulation result using the QualNet simulator shows that the MRFR protocol performs better than other protocols in terms of the end-to-end message delivery ratio and fault-tolerance capability.

• 한국기계가공학회지
• /
• 제18권6호
• /
• pp.1-8
• /
• 2019

Modern weapon systems are multifunctional, with capabilities for executing complex missions. However, they are required to be highly reliable, which increases their total cost of ownership. Because it is necessary to produce the best results within a limited budget, there is an increasing interest in development, acquisition, and maintenance costs. Consequently, there is a need for tools that calculate the lifecycle costs of weapons systems development to facilitate decision making. In this study, we propose a cost calculation function based on the Markov process simulator-a reliability, availability, and maintainability analysis tool developed by applying the Markov-Monte Carlo method-as an alternative to these requirements to facilitate decision-making in systems development.

• 전력전자학회논문지
• /
• 제26권2호
• /
• pp.150-157
• /
• 2021

Nowadays, a DC microgrid that can link various distributed power sources is gaining much attention. Accordingly, research on fault situations, such as line-to-line and line-to-ground faults of the DC microgrid, has been conducted to improve grid reliability. However, the blackout of an AC system and the oscillation of a DC bus voltage have not been reported or have not been sufficiently verified by previous research. In this study, a 20 kW DC microgrid testbed using a power HIL simulation technique is proposed. This testbed can simulate various fault conditions without any additional grid facilities and dangerous experiments. It includes the blackout of the DC microgrid caused by the AC utility grid's blackout, a drastic load increment, and the DC bus voltage oscillation caused by the LCL filter of the voltage source converter. The effectiveness of the proposed testbed is verified by using Opal-RT's OP5707 real-time simulator with a 3 kW prototype three-port dual-active-bridge converter.

• 한국통신학회논문지
• /
• 제41권11호
• /
• pp.1661-1670
• /
• 2016

본 논문에서는 화재 상황에서의 위험도 예측 시스템과 화재 대피 경로 도출 알고리즘을 제안한다. 온도 예측 시스템에서는 무선 센서 네트워크를 통해 수집한 온도 정보를 기반으로 멀티레벨 클러스터링 기법을 통해 사용자가 대피할 시점의 온도를 예측한다. 예측된 온도와 이의 신뢰도를 바탕으로 사용자의 현재 위치부터 가장 안전한 출구까지의 대피 경로를 도출하는 화재 대피 경로 알고리즘을 제안한다. NIST의 FDS(Fire Dynamics Simulator) 시뮬레이터를 이용하여 47개의 정적 노드로 구성된 무선 센서 네트워크에 대해 1436.41초 동안 성능 평가를 한 결과, 제안하는 온도 예측 시스템을 사용하였을 때, 예측 정확도가 1.48배 증가하였으며, 예측 정확도가 높은 군에 속하는 노드에 대해서는 4.21배로 크게 증가한 것으로 나타났다. 또한, 화재 대피 경로 알고리즘을 통해 도출한 대피 경로가 실제 ground-truth 온도를 사용하여 대피했을 때에 비하여 안전한 노드를 경유하는 비율이 큰 차이를 보이지 않았으며, 최단 대피 경로에 비해서는 약 12% 이상 더 안전한 경로를 도출하였음을 확인할 수 있었다.

• 터널과지하공간
• /
• 제23권6호
• /
• pp.480-492
• /
• 2013

비화산지대에서도 적용 가능한 인공저류층 생성방식의 지열발전기술의 등장으로 막대한 비용이 소요되는 대심도 시추공사를 효율적이고 경제적으로 수행하기 위한 연구개발의 필요성이 증대되고 있다. 그러나 시추공사는 수행과정에서 수많은 불확실한 사건이 발생하여 공기와 비용을 신뢰적으로 예측하기가 매우 어렵기 때문에 계획적이고 효율적으로 공사를 관리하기가 어려운 실정이다. 특히, 비트의 마모로 인해 이산적으로 발생하는 시추장비의 라운드 트립(round trip)은 심도가 깊어질수록 소요시간이 증가하여 공사 성능에 영향을 많이 끼치는 요소로서 발생시점과 깊이를 사전에 평가하여 최적화할 수 있는 기술이 필요하다. 본 연구에서는 비트의 마모상태를 총 8단계로 구분하여 마모단계별 라운드 트립이 발생되는 깊이와 시점을 분석할 수 있는 예측 알고리즘(TOSA)을 개발하였다. 시뮬레이션을 위한 단위구간을 분할할 수 있는 방법론을 제시하였으며, 구간별 시추속도 및 비트의 마모도 예측을 위한 방법으로 Bourgoyne and Young의 모델을 활용하였다. 마지막으로 사용자 편의성을 고려하여 개발된 알고리즘을 시스템화 하였다.