• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권3호
• /
• pp.187-199
• /
• 2012

In general, accelerated life testing is performed to reduce testing time. But it is difficult to apply accelerated life testing to a system besides components. This paper developed a software which estimates reliability measures of the system from results of accelerated life testing of components building the system. This software can handle the system with a large number of components and complex topology. Multiple failure modes of a component were also considered in this software. Based on the software, reliability measures of a gearbox example at several conditions were estimated from the accelerated life testing results of three components of the gearbox.

• International Journal of Reliability and Applications
• /
• 제16권1호
• /
• pp.35-53
• /
• 2015

This investigation deals with reliability and sensitivity analysis of a repairable embedded system with standby wherein repairman takes multiple vacations. The hardware system consists of 'M' operating and 'S' standby components. The repairman can leave for multiple vacations of random length during its idle time. Whenever any operating unit fails, it is immediately replaced by a standby unit if available. Moreover, governing equations of an embedded system are constructed using appropriate birth-death rates. The vacation and repair time of repairman are exponentially distributed. The matrix method is used to find the steady-state probabilities of the number of failed components in the embedded system as well as other performance measures. Reliability indexes are presented. Further, numerical experiments are carried out for various system characteristics to examine the effects of different parameter. Using a special class of neuro-fuzzy systems i.e. Adaptive Network-based Fuzzy Interference Systems (ANFIS), we also approximate various performance measures. Finally, the conclusions and future research directions are provided.

• 대한안전경영과학회지
• /
• 제14권1호
• /
• pp.225-233
• /
• 2012

The research discusses interrelationship of structural and reliability importance measures which used in the probabilistic safety assessment. The most frequently used component importance measures, such as Birnbaum's Importance (BI), Risk Reduction (RR), Risk Reduction Worth (RRW), RA (Risk Achievement), Risk Achievement Worth (RAW), Fussel Vesely (FV) and Critically Importance (CI) can be derived from two structure importance measures that are developed based on the size and the number of Minimal Path Set (MPS) and Minimal Cut Set (MCS). In order to show an effectiveness of importance measures which is developed in this paper, the three representative functional structures, such as series-parallel, k out of n and bridge are used to compare with Birnbaum's Importance measure. In addition, the study presents the implementation examples of Total Productive Maintenance (TPM) metrics and alternating renewal process models with exponential distribution to calculate the availability and unavailability of component facility for improving system performances. System state structure functions in terms of component states can be converted into the system availability (unavailability) functions by substituting the component reliabilities (unavailabilities) for the component states. The applicable examples are presented in order to help the understanding of practitioners.

• ETRI Journal
• /
• 제5권4호
• /
• pp.30-34
• /
• 1983

This paper presents some considerations of reliability for switching system, i. e. reliability measures, reliability model and prediction, and reliability improvement. Those are described comprehensively than technologies aspects. Recent trends for switching system reliability are also described so as to aid people interested in this field.

• Communications for Statistical Applications and Methods
• /
• 제18권2호
• /
• pp.201-211
• /
• 2011

In many cases, populations in the real world are composed of different subpopulations. Furthermore, in addition to the heterogeneity in the lifetimes of items, there also could be the heterogeneity in the efficiency or performance of items. In this case, the reliability measures should be defined in a different way. In this article, we consider the mixture of stochastically ordered subpopulations. Efficiency based reliability measures are defined when the performance of items in the subpopulations has different levels. Discrete and continuous mixing models are studied. The concept of the association between the lifetime and the performance of items in subpopulations is defined. It is shown that the consideration of efficiency can change the shape of the mixture failure rate dramatically especially when the lifetime and the performance of items in subpopulations are negatively associated. Furthermore, the modelling method proposed in this paper is applied to the case when the stress levels of the operating environment of items are different.

• 대한산업공학회지
• /
• 제33권1호
• /
• pp.61-69
• /
• 2007

In a large complex system, maintenance priorities for the failed components are important to maintain the sys-tern reliability at required level. Commonly used methods of determining maintenance priorities are based onranking the failed components by using reliability importance measures such as Birnbaum reliability importance,risk achievement worth and F-V importance, etc. In the preceding works, maintenance priorities for the failedcomponents are determined by using such existing measures, In this study, a new method of determining main-tenance priorities, which utilizes the joint reliability importance is proposed. By investigating the sign of thejoint reliability importance, maintenance priorities obtained by the existing methods are adjusted to yield new re-vised priorities. The revised maintenance priorities are shown to be more effective than the existing ones fromthe standpoint of the speed of system recovery, Effectiveness of the proposed method is illustrated by numericalexamples.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.142-148
• /
• 2015

Due to advancements in technology and manufacturing capability, it is not uncommon that life tests yield no or few failures at low stress levels. In these situations it is difficult to analyse lifetime data and make meaningful inferences about product or system reliability. For some products or systems whose performance characteristics degrade over time, a failure is said to have occurred when a performance characteristic crosses a critical threshold. The measurements of the degradation characteristic contain much useful and credible information about product or system reliability. Degradation measurements of the performance characteristics of an unfailed unit at different times can directly relate reliability measures to physical characteristics. Reliability prediction based on physical performance measures can be an efficient and alternative method to estimate for some highly reliable parts or systems. If the degradation process and the distance between the last measurement and a specified threshold can be established, the remaining useful life is predicted in advance. In turn, this prediction leads to just in time maintenance decision to protect systems. In this paper, we describe techniques for mapping product or system which has degrading performance parameter to the associated classical reliability measures in the performance domain. This paper described a general modeling and analysis procedure for reliability prediction based on one dominant degradation performance characteristic considering pseudo degradation performance life trend model. This pseudo degradation trend model is based on probability modeling of a failure mechanism degradation trend and comparison of a projected distribution to pre-defined critical soft failure point in time or cycle.

• 대한간호학회지
• /
• 제33권6호
• /
• pp.772-783
• /
• 2003

Purpose: This study was performed to measure the nursing service perceived value by consumer and providers, and to investigate the relationship among nursing service, general satisfaction and hospital revisiting intent, and to examinate the tools that measures nursing service's reliability, construct validity and usefulness. Method: The questionnaire was developed and distributed to 300 patients and 210 nurses at three general hospitals. For data analysis, SPSS/PC program was used. Result: The nursing service perceived value by providers is higher than that by consumers. There are distinctive difference in the expectation, and importance and performance values of the nursing service perceived. In examination of the relationship among nursing service, general satisfaction and hospital revisiting intent, nursing service has a deep relationship with general satisfaction, but doesn't have relationship with hospital revisiting intent. The tool that measures nursing service has a good reliability and construct validity. In analysis on the usefulness between the tools, SERVPERF tool is more useful than SERVQUAL tool. conclusion: The nursing service perceived value by consumer is different that by providers, and the tool that measures nursing service has a good reliability and construct validity. The SERVPERF tool is more useful than SERVQUAL tool.

• 대한안전경영과학회지
• /
• 제14권2호
• /
• pp.147-158
• /
• 2012

This paper aims to develop a new chain metrics for obtaining lean Overall Equipment Effectiveness(OEE) and present implementation strategy which considers the properties for Total Productive Maintenance(TPM) to reduce machine losses, Performance Analysis and Control(PAC) to reduce labor losses, Lean Production System(LPS) to reduce floor wastes, and Theory of Constraints(TOC) to minimize the problem of Capacity Constrained Resource(CCR). The study reviews the related literatures and reformulates the structure of machine losses, labor losses and field wastes. The research also develops the integrated productivity metrics according to time, units, reliability and maintainability. It is found that the study develops the actual productivity measure in terms of efficiency, effectiveness and standard productivity. In addition to that, it outlines and develops by using the integrated LPS and TPM, lean OEE measures such as Time Based Productivity(TBP), Unit Based Productivity(UBP), and Reliability & Maintainability Based Availability(RMBA). Implication examples are proposed to make it easier and available for practioners to understand the implementation strategies about TPM OEE, lean OEE and TOC OEE. Futhermore related to other studies, the research contributes to create a new chain productivity measures to clear the interrelationship concepts of productivity, efficiency and effectiveness. Moreover the paper develops the enhanced OEE measures by integration of TPM, PAC, LPS and TOC with the perspective of schedule, throughput, reliability, maintainability and availability.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권3호
• /
• pp.208-212
• /
• 2018

Purpose: The three Vs of volume, velocity and variety are commonly used to characterize different aspects of Big Data. Volume refers to the amount of data, variety refers to the number of types of data and velocity refers to the speed of data processing. According to these characteristics, the size of Big Data varies rapidly, some data buckets will contain outliers, and buckets might have different sizes. Correlation plays a big role in Big Data. We need something better than usual correlation measures. Methods: The correlation measures offered by traditional statistics are compared. And conditions to meet the characteristics of Big Data are suggested. Finally the correlation measure that satisfies the suggested conditions is recommended. Results: Mutual Information satisfies the suggested conditions. Conclusion: This article builds on traditional correlation measures to analyze the co-relation between two variables. The conditions for correlation measures to meet the characteristics of Big Data are suggested. The correlation measure that satisfies these conditions is recommended. It is Mutual Information.