• Ocean and Polar Research
• /
• v.39 no.3
• /
• pp.213-219
• /
• 2017

In this study, we analyzed the economic feasibility of the swimming crab (Portunus trituberculatus) fry releasing program in the West Sea of Korea. The catch rate of released fry in 2010, measured by genetic markers, was applied to the economic surplus method to estimate benefits. As a result of our analysis, the B/C ratio, as an indicator of economic evaluation, was determined to be 2.168, which means that the releasing program was economically feasible. And it was shown that the benefits to consumers is six times greater than the benefits to producers, confirming the necessity of the releasing program as a public work.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.6
• /
• pp.523-528
• /
• 2015

As the sizes of mobile phones and watch phones decrease, the joining bolt for the products should also be decreased to a miniature size. However, the miniature-sized bolt has to support sufficient joining and anti-releasing torque to keep the product fastened. In this study, the thread shapes are designed to improve anti-releasing performance of bolts. Especially, when bolt materials is stronger than nut materials, the design of thread shapes is needed, like bolt for wood, to improve the fastening capability. Through the joining and releasing analyses of bolts, the thread shapes for SUS302 bolt and Mg alloy nut are newly designed. It was shown that the newly designed bolt has 20 % higher anti-releasing torque and 35% lower torque loosening slope compared to the standard bolt.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.3
• /
• pp.261-271
• /
• 2006

The present study is aimed at evaluating the economic effectiveness of Abalone, haliotis discus hanai Releasing Project(ARP) conducted in the fishing ground owned by a fishing village in Ulsan, Korea. The results were summarized as follows: First, an average ratio of released abalones in the total landing after releasing is shown to be 85.0%. Second, the recapture rate of released abalones is 46.8%, exceeding the recapture rate of BEP(Break-Even-Point), 22.9%. Third, it is evaluated that total economic effectiveness of the ARP is 6.7-6.8 times, net effectiveness is 2.2-2.3 times, and the NPV(Net Present Value) discounted by a 8% interest rate is 474, 635 thousand wons, indicating the project is profitable. Considerable parts of the positive results on the ARP are based on some beneficial conditions, including the selection of favorable releasing sites, best self-regulation system of a fishing village for preservation of seaweed facilities and continued activities for protecting small abalones and their rearing. These results imply that the success of the ARP would be primarily dependent upon the selection of releasing site and effective management system after releasing.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.171-176
• /
• 2013

In previous study, the novel nanosized curdlan-silica complex for a sustain-releasing effect was developed by using gamma-irradiation. It can be applicable to use in various sustainr-eleasing formulation in agriculture industry. This study was conducted to investigate its storage stability and environmental toxicity in an accelerated condition. The complex samples were treated with high temperature condition ($65^{\circ}C$) during 3 weeks, and then sustain-releasing property of complex was verified thereby using Ion Chromatography on a weekly basis. The morphology of the complex was characterized using scanning electron microscopy (SEM). Results of Ion Chromatography analysis showed that sample treated for 3 weeks was similar to sustain-releasing pattern of non-treatment sample. We verify concluded that the complex is able to keep its sustain-releasing property and sustained-releasing in 3 years. Also the formulation has no environmental toxicity.

• Analytical Science and Technology
• /
• v.20 no.2
• /
• pp.176-182
• /
• 2007

The present study relates to a matrix-typed, sustained-releasing agent comprising agrochemical effective ingredients being capable of recognizing a content of moisture, and a preparation method thereof. The curdlan solution added to acid was formed matrix which has unique network structure. The matrix treated by heat lost water solubility. The network structure of matrix was opened in the aquatic condition but closed again in dry condition. Therefore, in the sustained-releasing formulation system, an agrochemical effective ingredient was released from the formulation only in the aquatic condition. Use of the composition according to the product can control a manifesting time of effects of agrochemicals and can provide agrochemicals with reduced harmful damages.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.27-40
• /
• 2004

The purpose of this study was to provide basic data for improving athletic performances by analyzing the kinematic variables of the Double Backward Somersault on the Parallel Bars through the 3D motion analysis. The subjects in this study were 5 male gymnasts who were ranked as national athletes. The results are as follows. 1. A total time(Mean Time) of performance showed $2.72{\pm}0.82\;sec$. and flight time to landing after releasing was 0.87sec.(mean). In order to perform better stable flying movement, the flight time should be increased. 2. In the change of velocity of the center of mass, when the increasing ascension velocity of the upper point was high, the position in the top point was high on releasing. 3. In the position variable of the center of mass, the mean of upper-bottom position in horizontal posture was $242.1{\pm}6.5cm$, $232.8{\pm}6.4cm$ in releasing, and $265.0{\pm}5.6cm$ in the highest point. This result is explained that the position of center of mass can be raised by using elastic power when wrist raised the bar in the releasing movement. 4. The angle of shoulder joint was $271.1{\pm}14.0$. Such a big angle influences a negative effect on the releasing velocity, because trunk is not a position in the enough vertical direction. 5. The ankle of hip joint in hand-standing was $191.1{\pm}5.9$, $118.8{\pm}5.3$ in releasing, and $122.3{\pm}5.3$ in taking on. Therefore, the result suggests that trunk should be straightly raised in taking on.

• Journal of Integrative Natural Science
• /
• v.11 no.2
• /
• pp.101-106
• /
• 2018

Corticotropin - releasing hormone receptor 1 (CRHR1) forms an integral part of the pathophysiology of disorders like post-traumatic stress disorder, stress, anxiety, addiction, and depression. Hence it is essential to look for new, potent and structure-specific inhibitors of CRHR1. We have analysed the protein-protein interaction complexes of the CRHR1 receptor with its native ligand CRF and full agonist Sauvagine. The structure of Sauvagine was predicted using homology modelling. We have identified that the residues TYR253, ASP254, GLU256, GLY265, ARG1014 and LY1060 are important in the formation of protein-protein complex formation. Future studies on these residues could throw light on the crucial structural features required for the formation of CRHR1-inhibitor complex and in studies that try to solve the structural complexities of CRHR1.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.257-262
• /
• 2017

As the size of electric products such as mobile phones and smart watches decrease, the bolts used to assemble these products should also be miniaturized. A miniature-sized bolt has to provide sufficient joining torque and anti-releasing torque to keep the components together. We studied a serrated bolt as a candidate for a miniature-sized fastener to increase the anti-releasing torque. In a serrated bolt, a serrated shape is formed on the bottom surface of the bolt head to create an obstacle to releasing. In this study, finite element analyses for the joining and releasing of bolts were carried out, and the anti-releasing performance was predicted. Based on the results of analyses using various numbers of serrations and fastening depths, the effects of the number of serrations and fastening depth on the anti-releasing performance were investigated.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.251-259
• /
• 2002

A new splicing technique by the secondary moment which is intentionally induced by the tensioning effect of continuous tendons and the releasing effect of temporary beam tendons was developed. The tensioning and releasing works are essential and the decisions of the magnitude and order about them may be important engineering problems in this technique. In this paper, it was studied lot the practically optimum procedure of the tensioning and releasing works. As the result, it is concluded that the gradual progress through the three stages is reasonable for the procedure and the tensioning work have to precede the releasing work. Additionally, the magnitude of preceding tensioning force should be obtained by the sensitivity analysis and the minimum limit is more critical than the minimum limit.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.4
• /
• pp.365-371
• /
• 2003

The reared fries of black sea bream, Acanthopagrus schlegeli were released in Gamak Bay and initial adaptation to the environment was evaluated. Thirty thousand fries were marked with magnetic tag, released and recaptured and its stomach content were analysed; the neighboring zooplankton, beuthic algae and other young fishes were investigated. The fries were released on July 30, 2001 in summer season. Water temperature of surface and bottom were $24^{\circ}C\;and\;21^{\circ}C,$ respectively. $Chlorophyll\;\alpha$ content was 4.5 ${\mu}g/L$ with high primary production. Salinity was $32.0-32.5\%_{\circ}.$ Water depth of releasing site was about 30 m. The sea jungle was formed at the first point of releasing and it kept the fries for about 3 days in the bay with plenty of food organisms within 5 m depth. Stomach analysis of the fries revealed that real feeding started from the 15 days after releasing and full feeding took place after the tenth day.