• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.410-417
• /
• 2011

Effects of ethylene-propylene diene monomer (EPDM)/polypropylene (PP), zinc oxide, stearic acid, and clay on the combustive properties based on EDPM/PP were investigated. The EDPM/PP/clay nanocomposites was compounded to prepare specimen for combustive analysis by cone calorimeter (ISO 5660-1). It was found that the specific mass loss rate (SMLR) in the nanocomposites decreased due to the fire resistance compared with unfilled EDPM/PP, while the nanocomposites showed the higher total heat release (THR), higher CO production release, and higher specific extinction area (SEA) than those of virgin EPDM/PP. The stearic acid for softening ruber increased the THR and amount of smoke by itself, combustible.

• Journal of Pharmaceutical Investigation
• /
• 제21권2호
• /
• pp.91-95
• /
• 1991

Polyethylene glycol, polypropylene glycol and block copolymer of ethylene glycol and propylene glycol were crosslinked by triisocyanate to form water swellable, rubbery polymer. The equilibrium swelling of the hydrogels ranged from 3% to 60% according to the hydrophobic-hydrophilic properties of the prepolymers. Model drugs, sodium salicylate and prednisolone were incorporated in the polymer matrices by swelling loading. Physical properties of the drugs affected the drug release mechanisms due to the change in the swelling behaviors of the polymeric devices. Zero order release was observed in the case of relatively hydrophobic polymer matrices.

• 공업화학
• /
• 제35권3호
• /
• pp.192-199
• /
• 2024

본 연구에서 carbamazepine (CBZ) 각인 도토리 전분(acorn starch, AS)/PVA 기반 바이오소재를 casting method와 UV 조사를 이용하여 제조하고 물리·화학적 특성, CBZ 흡착 및 방출 특성을 조사하였다. 제조한 바이오소재의 표면 특성은 FE-SEM을 통해 확인하였고, UV 조사에 따른 CBZ의 안정성과 바이오소재 작용기는 FT-IR 분석을 이용하였다. CBZ에 대한 바이오소재의 흡착 특성은 binding isotherm 및 Scatchard plot으로 평가하였고 이를 통해 CBZ 각인 바이오소재에 CBZ 결합 부위가 존재하는 것을 확인하였다. 경피 약물 전달 시스템의 응용 가능성을 평가하기 위하여 36.5 ℃에서 다양한 pH의 완충용액과 인공피부를 이용해 제조한 바이오소재의 CBZ 방출 특성을 조사하였다. 이 결과, CBZ는 pH 가 증가할수록 빠른 방출 속도를 보였으며, 인공피부 테스트에서 12 h 동안 지속적으로 방출되었다. 또한, 수학적 모델을 적용시킨 결과, 완충용액에서 CBZ 방출 메커니즘은 pseudo-Fickian diffusion 메커니즘을 따랐고 인공피부에서 non-Fickian diffusion 메커니즘을 따르는 것으로 평가되었다.

• 공업화학
• /
• 제34권2호
• /
• pp.161-169
• /
• 2023

본 연구는 allbanggae starch (ABS), polyvinyl alcohol (PVA), alginic acid (SA)를 이용하여 naproxen (NP) 각인 starch 기반 다층 바이오소재를 제조하고, 물리화학적 특성과 약물 방출 제어 효과를 조사하였다. 또한, FE-SEM과 FT-IR 분석에 의해 제조한 다층 바이오소재의 특성을 조사하였다. 약물 방출 제어 효과와 경피 약물 전달 시스템의 적용 가능성을 확인하기 위해 NP 각인 다층 바이오소재로부터 NP 방출 특성을 사람의 체온인 36.5 ℃에서 다양한 pH buffer solution과 인공 피부를 이용하여 확인하였다. NP는 낮은 pH보다 높은 pH에서 1.3배 더 빠른 방출을 나타냈고, single-layer 바이오소재에서보다 multi-layer 바이오소재에서 약 4.0배 느린 방출이 일어남을 확인하였다. 인공 피부 방출에서도 동일하게 single-layer 바이오소재보다 multi-layer 바이오소재에서 약 4.0배 더 느린 약물 방출 결과를 나타내었다. 또한, double-layer와 triple-layer 바이오소재 모두 12시간 동안 지속적으로 NP가 방출되었음을 확인 하였다. NP 방출 mechanism을 규명하기 위해 수학적 모델링에 적용하여 비교했을 때, pH buffer solution에서의 방출은 Fickian diffusion mechanism, 인공 피부 방출은 empirical mechanism에 적합한 것을 확인하였다.

• 한국화재소방학회논문지
• /
• 제24권5호
• /
• pp.115-121
• /
• 2010

이 연구에서는 암모늄염을 처리한 리기다 소나무의 연소성을 시험하였다. 실온에서 3종류의 암모늄염 즉, 황산암모늄, 제1인산암모늄, 그리고 제2인산암모늄의 20wt% 수용액에 각각 리기다 소나무를 함침시켜 건조시킨 후 콘칼로리미터(ISO 5660-1)를 이용하여 그의 연소성을 시험하였다. 암모늄염으로 처리한 시험편은 처리하지 않은 시험편에 비하여 그의 연소성을 감소 시켰다. 이것은 연소 억제성이 순수 리기다 소나무 시험편에 처리한 암모늄염 때문에 향상된 것으로 생각된다. 또한 암모늄염으로 처리한 시험편은 처리하지 않은 시험편에 비해 낮은 최대열방출률과 낮은 총방출열량을 나타내었다.

• 대한소아치과학회지
• /
• 제47권2호
• /
• pp.196-204
• /
• 2020

이 연구는 두 종류의 글라스 아이오노머와 'alkasite' 계열 수복재의 불소 유리 및 재충전 양상을 비교, 평가하기 위해 시행되었다. 글라스 아이오노머 Fuji IX GP와 Riva Self Cure, 'alkasite' 수복재인 Cention N, 복합레진 Filtek™ Z350XT의 시편을 직경 10.0 mm, 높이 2.0 mm의 원반 형태로 제작하였다. 총 28일간 불소 유리량을 측정한 이후, 각 재료별로 시편을 두 군으로 분류하였다. 실험군에는 1.23% acidulated phosphate fluoride(APF) gel을 1분간 도포하고, 이후 7일간의 불소 유리량 측정을 통해 대조군과 비교하여 각 재료의 불소 재충전 여부를 평가하였다. 불소 유리량은 Riva Self Cure, Fuji IX GP, Cention N의 순으로 높게 나타났다(p < 0.05). Cention N의 불소 유리량은 Fuji IX GP의 약 49% 수준으로 측정되었다. 또한, Riva Self Cure, Fuji IX GP, Cention N에서 1.23% APF gel의 도포 후 불소 유리량의 증가가 관찰되어(p < 0.05), 글라스 아이오노머뿐 아니라 Cention N에서도 불소의 재충전 양상이 확인되었다.

• 한국물환경학회지
• /
• 제25권5호
• /
• pp.742-749
• /
• 2009

To examine the characteristics of the nutrient release from the sediments in two reservoirs, Lake Paldang and Lake Cheungpyeung, we analyzed physical and chemical properties of the sediments and calculated the nutrient release rates from the sediments. The particle properties of sediments in Lake Paldang changed from silt to sand after summer rainy season, especially in the water area of the Kyeungan River where the water depth was shallow and the width of river was narrow. The sediments in Lake Cheungpyeung had higher contents of silt and clay than in Lake Paldang, and the particle size was not much different before and after rainfall. The release rates of nutrients in two lakes varied with the kind of nutrients and the season. The release rates of DTN and ${NH_4}^+-N$ in Lake Paldang were faster in spring than autumn. But the Lake Cheungpyeung showed similar values of release rates before and after summer rainy season. ${NO_3}^--N$ and phosphorous were not released from sediments or were absorbed into sediments all the time in two lakes. Compared with other lakes, the sediments of two lakes consisted of bigger particles and had a lower organic matters content than other lake-type reservoirs. Due to the short hydraulic retention time and no stratification throughout the year in Lake Paldang and Lake Cheungpyeung, the release rates of nutrients from sediment in these reservoirs were lower than other lakes and this seems to be a typical characteristic of river-type reservoirs.

• Journal of Pharmaceutical Investigation
• /
• 제24권3호
• /
• pp.155-165
• /
• 1994

Some mucoadhesive polymers such as hydroxypropylcelluose (HPC) and carbopol-934 (CP) have been employed for the preparation of mucoadhesive polymeric systems, and their physical properties including mucoadhesion, swelling, and drug release were evaluated. A new simple experimental technique that can quantitatively measure the bioadhesive properties of various polymeric systems has been developed by the methods of detachment force test. As the polymeric systems, the discs of freeze-dried HPC/CP solid dispersions were prepared. The mucosa used in these tests were upper, middle, and lower parts of small intestine of male rats weighing $300{\sim}350\;g$. Detachment forces were increased as the mole fraction of CP increased in discs of HPC/CP solid dispersions. In the points of intestinal site dependence of mucoadhesion, the solid dispersions revealed non-specific mucoadhesion to the intestine. Swelling and drug release characteristics of mucoadhesive polymeric systems were studied extensively to find out the feasibility for the oral controlled delivery systems. Swelling ratio, expressed as the final height/initial height, has been determined in various pH buffer solutions. Hydrochlorothiazide (HCT) was employed as a model drug for release study. Apparent swelling and drug release rate constants, $K_s$ and $K_r$ respectively, were obtained from the square-root time plot of either swelling ratio or released amount of drug, particularly for the time periods before reaching the equilibrium. As a result, the swelling ratio of HPC/CP solid dispersions was increased as the weight percentage of CP increased. Similarly, the release of HCT from the solid dispersions was dependent on pH changes and CP contents, resulted in the slower release of HCT with the increases of pH and CP contents.

• 환경영향평가
• /
• 제21권1호
• /
• pp.81-91
• /
• 2012

In this study, it is grasped the status of nutrients through an investigation of release characteristics and physicochemical properties of sediments on reservoir. And then the effect of sediments is evaluated on the water quality in reservoir. In the results of physicochemical analysis, the pollution level of midstream is the highest, which shows the traits that the water is more deeper and takes place a deposition consistently. Then, the pollution level of upstream is higher than downstream's because inflow has influence on the upstream directly. The downstream is located near tidal gate so that the soil particles can be moved easily and are difficult to be deposited due to the distribution of seawater by control of tidal gate. Therefore, the downstream is showed the lowest pollution level than the others. Also, the concentration of SOD(Sediment Oxygen Demand) in the upstream which is influenced on the effect of inflow is highest than the others. When it analyzes under anaerobic and aerobic condition to understand the release characteristic of sediment, it shows that the release rate is low or negative under the aerobic condition. Whereas the release rate is usually positive under the unaerobic condition relatively. According to these results, it is necessary to maintain the proper environmental factors of water body for decreasing the release rate of sediment. Because the release rate is changeable under the different condition of water body. Therefore, proper strategies are required for increasing the self-purification of water as well as keeping the aerobic condition of sediment and managing a sediment layer directly to control the inner-pollution by the sediment of reservoir.

• Journal of Pharmaceutical Investigation
• /
• 제19권2호
• /
• pp.99-107
• /
• 1989

In order to develop a pediatric liquid preparation with sustained release properties, dextromethorphan hydrobromide (DEXT) was complexed with strong cation exchange resin (CG 120) and the-complex was coated with Eudragit RS using a phase separation method by non-solvent addition. The effect of pH, ionic strength of the release medium and drug/resin ratio on the release rate of DEXT was studied. The release rate of free drug from the uncoated complex, and coated complexes with 9.5 and 18.5% Eudragit RS in artificial gastric juice were measured. The release rate from the uncoated complex was faster with higher pH, higher ionic strength of the release medium and higher drug/resin ratio. The release rate from the coated complex could be controlled by the amount of coating material, and the surface after release did not rupture into.