• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.311-318
• /
• 2015

This dissertation proposes method for development technology of voice and SMS(Short Message Service) alarming system based on modbus protocol. The proposed technology is composed of the following 3 stages; hardware development based on microprocessor, development of input and output driver for modem, mp3 decoder, making modbus protocol stack. In the stage of hardware development based on microprocessor, we develop hardware which receives alarm from modbus master and transmit sms message, play mp3. In the stage of development of input / ouput device driver such as modem, mp3 decoder, we develop program which control each devices. In the stage of making modbus protocol stack, voice and sms alarm system is made for receiving alarm via modbus protocol. To evaluate performance of proposed technology, we issued alarm to voice and sms alarming system on purpose. As a result, response speed of detecting alarm was 10.7ms, communication distance was 1.2Km, operating temperature was from $-25^{\circ}C$ to $70^{\circ}C$, we confirmed supporting modbus protocol. And we verified that proposed voice and sms alarming system in the thesis has a performance to be used as an industrial building alarming system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.137-142
• /
• 2016

A two-step open system(TOS) was proposed to relay between a healing platform and a repository of personal health documents. TOS was designed by taking into consideration the pubsub service based on large scale connections to monitor a provider's access/request process for health documents in real time. TOS, however, uses WebSocket as a communication protocol in case of pubsub. Given the operational environment of low quality wireless networks for mobile devices that are user terminals in a healing platform, there is a need to add a messaging protocol to support QoS as well as a transmission protocol. As a light messaging protocol optimized for mobile devices, MQTT defines reliable messaging QoS to consider a wireless network situation of low speed/low quality. This study designed an MQTT protocol-based message broker to support QoS in case of large scale connections and pubsub by taking into consideration mobile devices that are user terminals in a healing platform. After designing a model between TOS and MQTT message broker, the study implemented a prototype based on the proposed design and compared it with its counterparts from previous studies based on the performance indicators in a load-test with the MQTT client tool.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.3
• /
• pp.281-285
• /
• 2008

Wireless sensor networks are closely related with the geometric environment in which they are deployed. We consider the probable case when a routing protocol runs on an environment with many complex obstacles like downtown surroundings. In addition, there are no unrealistic assumptions in order to increase practicality of the protocol. Our goal is to find a routing protocol for maximizing network lifetime by using only connectivity information in the complex sensor network environment. We propose a topology-based routing algorithm that accomplishes good performance in terms of network lifetime and routing complexity as measures. Our routing algorithm makes routing decision based on a weighted graph as topological abstraction of the complex network. The graph conduces to lifetime enhancement by giving alternative paths, distributing the skewed burden. An energy estimation method is used so as to maintain routing information without any additional cost. We show how our approach can be used to maximize network lifetime and by extensive simulation we prove that out approach gives good results in terms of both measures-network lifetime and routing complexity.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.21-28
• /
• 2016

This paper presents a cooperative transmission scheme for underwater acoustic sensor networks to improve packet transmission rate and reduce energy consumption. Source node transmits duplicated information relayed by distributed antennas called a virtual antenna array. Destination node combines that information to reduce packet error rate. The suggested cooperative scheme enhances the reliability by providing high diversity gains through intermediate relay nodes to overcome the distinct characteristics of the underwater channel, such as high transmission loss, propagation delay, and ambient noises. It is suggested that the algorithm select destinations and potential relays from a set of neighboring nodes that utilize distance cost, the residual energy of each node and local measurement of the channel conditions into calculation. Simulation results show that the proposed scheme reduces average energy consumption, response time, and increases packet delivery ratio compared with the SPF(Shortest Path First) and non-cooperative scheme using OPNET Moduler.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.890-910
• /
• 2014

This paper investigates the spectrum hole utilization of cooperative schemes for the two-way relaying model in order to improve the utilization efficiency of limited spectrum holes in cognitive radio networks with imperfect spectrum sensing. We propose two specific bidirectional secondary data transmission (BSDT) schemes with two-step and three-step two-way relaying models, i.e., two-BSDT and three-BSDT schemes, where the spectrum sensing and the secondary data transmission are jointly designed. In the proposed cooperative schemes, the best two-way relay channel between two secondary users is selected from a group of secondary users serving as cognitive relays and assists the bi-directional communication between the two secondary users without a direct link. The closed-form asymptotic expressions for outage probabilities of the two schemes are derived with a primary user protection constraint over Rayleigh fading channels. Based on the derived outage probabilities, the spectrum hole utilization is calculated to evaluate the percentage of spectrum holes used by the two secondary users for their successful information exchange without channel outage. Numerical results show that the spectrum hole utilization depends on the spectrum sensing overhead and the channel gain from a primary user to secondary users. Additionally, we compare the spectrum hole utilization of the two schemes as the varying of secondary signal to noise ratio, the number of cognitive relays, and symmetric and asymmetric channels.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.51-55
• /
• 2007

Generally, PLC (Power Line Communication) based home automation devices such as wall switch, walt socket, gas controller, etc, must maintain wake-up status at all time to control other electronic devices and monitor their on/off status whether they are in service or not. In order to reduce the unnecessary energy consumption during the standby mode, the new power-saving PLC 2 ports wall switch has been developed, separating PLC communication part and controller part and introducing sleep mode. In addition, to expand life cycle of PLC product and to reduce the rate of product failure in active mode, the instant controlling method in controlling process is adopted instead of the maintenance controlling method. In comparison to the earlier model, the new 2 ports PLC wall switch has reduced power by 0.95[W] less in standby mode and 3.2[W] less in active mode than the previous one.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.21-30
• /
• 2006

For urban highway network, traffic control strategy paradigm has been shifted from the private auto-oriented to the public transit-oriented. Introduction of exclusive median bus lanes (EMBL) in Seoul, Korea, has especially accelerated such changes in transportation policy and thus highway environment. Left-turning movement treatment at signalized intersections where EMBL pass through has been emerged as one of the rising problems associated with a current signal head with 4-signal lens, the Korea standard. This study proposes a new signal phase operation scheme for signal operation at an isolated intersection where EMBL pass through. The authors propose to use of an exclusive bus signal head indicating right-of-way of transits on EMBL only. Based on it, three different phase operation scheme were developed for left-turn treatments for traffic control with (1) traffic responsive control mode and (2) time-of-day traffic control mode. In addition, methodologies to design and develop signal maps for the proposed signal phase schemes are also developed. The proposed operation can only be possible when additional uses of signal state relay boards are allowed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.51-56
• /
• 2014

Thesedays, there are many smart device applications developed, especially on the using various sensors included in the smart device. Smart devices have several sensors which are camera, GPS, mike, and communication module for collecting ubiquitous environment, and many applications are developed by using such sensors. In this paper, we developed the multimedia stream architecture and examined the smart device applications based on open source with front and back-end server clouds for developing the conceptual architecture. Also, we examined the back-end distributed servers, realtime multimedia stream transferring, multi-media store, and media relay for other server and smart devices. We test the examined architecture on the real target environment to collect the SIP initial setup time, media stream delay, and end-to-end play time. The test results show that there have good network operation environment to provide realtime multimedia services, and we need to improve the end-to-end play time by minimizing the initial setup time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.763-770
• /
• 2014

In traditional routing protocols including LEACH for wireless sensor networks, nodes suffer from unbalanced energy consumption because the nodes require large transmission energy as the distance to the sink node increase. Multi-hop based routing protocols have been studied to address this problem. In existing protocols, each cluster head usually chooses the closest head as a relay node. We propose LEACH-CHT, in which cluster heads choose the path with least energy consumption to send data to the sink node. In our research, each hop, a cluster head selects the least cost path to the sink node. This method solves the looping problem efficiently as well as make it possible that a cluster head excludes other cluster heads placed farther than its location from the path, without additional energy consumption. By balancing the energy consumption among the nodes, our proposed scheme outperforms existing multi-hop schemes by up to 36% in terms of average network lifetime.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.1
• /
• pp.37-48
• /
• 2011

Sensor networks monitor the environment, collect sensed data, and relay the data back to a collection point. Although sensor nodes have very limited hardware resources, they require an operating system that can provide efficient resource management and various application environments. In addition, the wireless sensor networks require the code update previously deployed to patch bugs in program and to improve performance of kernel service routines and application programs. This paper presents EPRCU (Easy to Perform Remote Code Update), a new operating system for wireless sensor nodes, which has enhanced functionalities to perform remote code update. To achieve an efficient code update, the EPRCU provides dynamic memory allocation and program memory management. It supports the event-driven kernel, which uses priority-based scheduling with the application of aging techniques. Therefore, the proposed operating system is not only easy to perform wireless communication with the remote code update but also suitable for various sensor network applications.