• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.96-107
• /
• 2015

VANET technologies provide real-time traffic information for mitigating traffic jam and preventing traffic accidents, as well as in-vehicle infotainment service through Telematics/Intelligent Transportation System (ITS). Due to the rapid increasement of various requirements, the vehicle communication with a limited resource and the fixed frame architecture of the conventional techniques is limited to provide an efficient communication service. Therefore, a new flexible operation depending on the surrounding situation information is required that needs an adaptive design of the network architecture and protocol for efficiently predicting, distributing and sharing the context-aware information. In this paper, Vehicle-to-Infrastructure (V2I) based on communication between vehicle and a Road Side Units (RSU) and Vehicle-to-Vehicle (V2V) based on communication between vehicles are effectively combined in a new MAC architecture and V2I and V2V vehicles collaborate in management. As a result, many vehicles and RSU can use more efficiently the resource and send data rapidly. The simulation results show that the proposed method can achieve high resource utilization in accordance. Also we can find out the optimal transmission relay time and 2nd relay vehicle selection probability value to spread out V2V/V2I collaborative schedule message rapidly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.25-34
• /
• 2019

Recently, when a fault occurs at a long-distance point in a LVDC (low voltage direct current) distribution feeder in a light rail system, the magnitude of the current can decrease to less than that of the load current of a light rail system. Therefore, proper protection coordination method to distinguish a fault current from a load current is required. To overcome these problems, this paper proposes an optimal algorithm of protection devices for a LVDC distribution feeder in a light rail system. In other words, based on the characteristics of the fault current for ground resistance and fault location, this paper proposes an optimal operation algorithm of a selective relay to properly identify the fault current compared to the load current in a light rail system. In addition, this paper modelled the distribution system including AC/DC converter using a PSCAD/EMTDC S/W and from the simulation results for a real light rail system, the proposed algorithm was found to be a useful and practical tool to correctly identify the fault current and load current.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.61-67
• /
• 2016

Opportunistic incremental relaying (OIR) system effectively overcomes the degradations caused by the fading of the wireless channel, and efficiently utilizes the wireless resources. Most of the OIR studies, however, assume spatially fixed relays. The user terminals which are usually served as relays move continuously, the assumption that the relays are fixed is not realistic. In this paper, the location of the spatially random user terminals are modeled by the Poisson point process, and the performance of an OIR system is derived. We noticed that the performance of the OIR system improves with the spatially random relays as well as with the fixed relays. Also the intensity of the relays and the transmitting directions toward the destination affect the performances. The performances of the maximal ratio combining (MRC) and the selection combining (SC) at the destination are compared.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1770-1785
• /
• 2013

In this paper, a multi-hop transmission protocol based on parallel communication of secondary users (SUs) is proposed. The primary multi-hop network coexists with a set of SUs by cooperative spectrum sharing. The main optimization target of our protocol is the overall performance of the secondary system with the guarantee of the primary outage performance. The energy consumption of the primary system is reduced by the cooperation of SUs. The aim of the primary source is to communicate with the primary destination via a number of primary relays. SUs may serve as extra decode-and-forward relays for the primary network. When an SU acts as a relay for a primary user (PU), some other SUs that satisfy the condition for parallel communication are selected to simultaneously access the primary spectrum for secondary transmissions. For the proposed protocol, two opportunistic routing strategies are proposed, and a search algorithm to select the SUs for parallel communication is described. The throughput of the SUs and the PU is illustrated. Numerical results demonstrate that the average throughput of the SUs is greatly improved, and the end-to-end throughput of the PU is slightly increased in the proposed protocol when there are more than seven SUs.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.171-179
• /
• 2016

The energy consumption problem in wireless sensor networks is investigated. The problem is to expend as little energy as possible receiving and transmitting data, because of constrained battery. In this paper, in order to extend the lifetime of the network, we proposed a location-based clustering algorithm for wireless sensor network with skewed-topology. The proposed algorithm is to deploy multiple child nodes at the sink to avoid bottleneck near the sink and to save energy. Proposed algorithm can reduce control traffic overhead by creating a dynamic cluster. We have evaluated the performance of our clustering algorithm through an analysis and a simulation. We compare our algorithm's performance to the best known centralized algorithm, and demonstrate that it achieves a good performance in terms of the life time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.752-757
• /
• 2016

Machine to Machine (M2M) communications is communications between a business application and devices via a communication network without any direct human interaction. The aim of our research is to connect any M2M device with an M2M AS (Application server) through an IMS (IP Multimedia Subsystem) Network Core using a M2M Gateway, in order to develop an M2M Horizontal Services Platform over IMS. An IP Multimedia Subsystem (IMS) is an architectural framework defined by the wireless standards body of the 3rd Generation Partnership Project (3GPP) for delivering IP multimedia services to mobile users. This paper shows the design and implementation of a Horizontal M2M Network Services Platform over an IP Multimedia Subsystem (IMS) using the Message Session Relay Protocol (MSRP). We summarize the protocols and architectures that formed the basis for the creation of our architecture. We provide a detailed description of our architecture design, describing the call flow of the proposed architecture and the entities operating in each process. We also describe the design and implementation process detailing the different tools used, explaining the selection of each component and its importance; also how we designed and implemented the M2M gateway, M2M Application Server, Open IMS Core, business application and M2M devices.

• Korean journal of applied entomology
• /
• v.61 no.3
• /
• pp.399-408
• /
• 2022

There has been much debate on the morphometric divergence between the recently identified Apis cerana koreana and Apis cerana honey bees. The aim of this study was to obtain phenotypic information that can be used to compare A. c. koreana data with other A. cerana subspecies data from open resources and determine breeding results on the basis of morphometric traits. To differentiate A. c. koreana, we investigated 22 classic morphological characteristics; royal jelly secretion; and the weight of workers, queens, and drones of A. c. koreana bred in Korea. To define the selection results, we used the geometric morphometric method. The artificially selected A. c. koreana secreted significantly more royal jelly (1.18 times) than the naturally selected A. c. koreana, which positively influenced the health of the colonies. These honey bees were identified more clearly with the geometric morphometric method than with the classic morphometric method, which is traditionally used to determine the subspecies. Large trends were noted for A. c. koreana on the basis of our results and literature from the 1980s regarding A. cerana sizes in Korea (tarsal index, length of forewing, and cubital index were measured). The cluster analysis revealed the proximity of A. c. koreana, A. cerana in China, and A. c. indica on the basis of eight classic characters, which, perhaps, relay the origin of the honey bees. The results of this study defined the morphometric responses of A. c. koreana honey bees to geographic isolation, climate change, and selection, which are important to identify, protect, and preserve honey bee stock in Korea.