• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.290-296
• /
• 2007

We propose new routing scheme, Cooperative Diversity-based Routing (CDR) which utilizes the cooperative space diversity for power saving and performance enhancement of wireless ad-hoc networks. The improved performance is compared with Multi-hop Relay Routing (NRR) by analytical methods. When the required outage probability is $1\times10^{-3}$ at the destination node in ad-hoc networks with 7 nodes, we noticed that each node can save power consumption by 15.5 dB in average, by using our proposed CDR compared to MRR.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.6
• /
• pp.2518-2533
• /
• 2020

In wireless sensor networks, adversaries may physically capture sensor nodes on the fields, and use them to launch false positive attacks (FPAs). FPAs could be conducted by injecting forged or old sensing reports, which would represent non-existent events on the fields, with the goal of disorientating the base stations and/or reducing the limited energy resources of sensor nodes on the fields. Researchers have proposed various mitigation methods against FPAs, including the statistical en-route filtering scheme (SEF). Most of these methods are based on key pre-distribution schemes and can efficiently filter injected false reports out at relay nodes through the verification of in-transit reports using the pre-distributed keys. However, their filtering power may decrease as time goes by since adversaries would attempt to capture additional nodes as many as possible. In this paper, we propose an adaptive key distribution method that could maintain the security power of SEF in WSNs under such circumstances. The proposed method makes, if necessary, BS update or re-distribute keys, which are used to endorse and verify reports, with the consideration of the filtering power and energy efficiency. Our experimental results show that the proposed method is more effective, compared to SEF, against FPAs in terms of security level and energy saving.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.623-629
• /
• 2010

A geographical routing protocol is typically utilized for a route selection of VANET. Even if it is conceptually well adapted into VANET, message delivery tends to be unreliable with frequent network partitions, which mainly come from the inherent characteristics such as high mobility and irregular traffic density. In this paper, we deal with a method to enable reliable message delivery with reflecting the traffic density on routing decision. By concatenating the message delivery cost of each of inbetween junction section, $1^{st}$ and $2^{nd}$ shortest paths are initially determined. When it is not possible to deliver the message on a junction on the 1st path, we utilize two novel ideas, that is, letting the message stay on the junction to find out a new relay node, and putting a replicated copy to reach via a detour path. By using the NS-2 network simulator, our method has been examined in terms of message delivery rate and delay. It shows that our method is much efficient than the other method in the low density environment, while it brings similar results in the high density environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3A
• /
• pp.245-253
• /
• 2010

In this paper, we derive the performance analysis of the coded cooperation over a Rician fading channel. A new scheme called coded cooperation was suggested by using user cooperation and channel codes simultaneously. In previous works, it was verified that the coded cooperation schemes have better performance than other relay schemes in a Rayleigh fading channel. However, the high speed short range indoor wireless communication system has recently attracted research attention and its channel with very high carrier frequency(60GHz) can be typically modeled as a Rician fading channel. We derive analytical outage probabilities and bit error probabilities of the coded cooperation over the Rician fading channel and prove it to have full diversity order.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.1
• /
• pp.34-45
• /
• 2013

Due to its self-configuring nature, the tactical mobile ad hoc network is used for communications between tactical units and the command and control center (CCC) in battlefields, where communication infrastructure is not available. However, when a tactical unit moves far away from the CCC or there are geographical constraints, the data link between two communicating nodes can be broken, which results in an invalid data route from the tactical units to CCC. In order to address this problem, in this paper we propose a hierarchical connectivity maintenance scheme, namely ADLCoM (Autonomous Data Link Connectivity Maintenance). In ADLCoM, each tactical unit has one or more GW (gateway), which checks the status of data links between tactical units. If there is a possibility of link breakage, GWs request ground or aerial unmanned vehicles to become a relay for the data link. The simulation results, based on tactical scenarios, show that the proposed scheme can significantly improve the network performance with respect to data delivery ratio.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.55-63
• /
• 2007

Multicast is an efficient transport mechanism for community communications and MANET is recently regarded as a promising solution for support ubiquitous computing as an underlying network technology. However, it is hard to deploy multicast mechanism into MANET owing to scarce resources in wireless networks and unpredictable changes in network topology. Several multicast mechanisms have been proposed in the literature to overcome the limitations. Especially, overlay multicasting schemes present several advantages over network based multicasting schemes. Yet, the overlay multicasting schemes still introduce redundant data transmissions that waste network bandwidth and battery of relay nodes. As a result the performance of the network is degraded. To reduce the redundancy, we propose an efficient way to construct an overlay structure as a multicast data delivery tree that utilizes a branch node which belongs to the tree. By using network simulation, we show that the proposed scheme presents higher packet delivery ratio and lower transmission cost than previously proposed schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4B
• /
• pp.191-199
• /
• 2007

Mobile node has to register its current location to Home Agent when it moves to another network while away from home. However, the registration procedure cannot be completed successfully when Home Agent is protected by the VPN gateway which guards MN's home network and discards the unauthorized packets incoming from outside as a lack of security association(SA) between the Care-of address and security policy of the home network so that the binding registration message without SA is discarded smoothly by the VPN gateway. This paper presents the authentication and key exchange scheme using the AAA infrastructure for a user in Internet to access the home network behind the VPN gateway. By defining the role of authentication and tunnel processing for each agent or relay entity, this paper presents the procedure to register the current location to its Home Agent with secure manner. Performance result shows cost improvement up to 40% comparing with existing scheme in terms of the packet loss cost, the property of mobility and traffic.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.323-328
• /
• 2007

Communication systems beyond 3G should provide more than 100 Mbps for wireless access. In addition to smart antennas, wireless multi-hop networks are proposed to increase the cell size and throughput. For example, Zigbee technology is expected to provide low cost and low power connectivity and can be implemented in wireless mesh networks larger than is possible with Bluetooth. Also, home embedded system using wireless mesh network is one of the key market areas for Zigbee applications. If the line-of-sight path is shadowed by home obstacles, a direct connection between the access point (AP) and the node is not possible at high frequencies. Therefore, by using multi-hop relay scheme the end node can be reached to AP. In this paper, the relaying of data between the AP and the end node is investigated and the throughput and PER(Packet Error Rate) are evaluated in multi-hop wireless mesh networks by using DSSS/BPSK system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.372-379
• /
• 2014

When a hand-held device with limited battery transmits and receives data using short-range wireless communication systems, such as WLAN(Wireless Local Area Network) or high speed WPAN(Wireless Personal Area Network), instead of mobile communication systems, the device is able to reduce the power consumption due to the reduced transmission distance. However, if there are many WLAN or high speed WPAN systems around the device, non-negligible power may be consumed by receiving and decoding the packets which have nothing to do with the device. In this paper, we propose a scheme reducing the power consumption by including physical-layer ID in WLAN or WPAN packets and avoiding unnecessary packet receptions. Also, we describe a method to determine the optimum number of physical-layer IDs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1608-1615
• /
• 2010

In this paper, we proposed the method called "DoublePico"(Double Piconet) forovercoming low data transmission rate in a scatternet. This needs a new Ad-hoc network topology to transmit with high rate. Every node performs the function of the relay station. DoublePico has two bluetooth devices that should form two different poconets; every node can make a link between two different piconets. Two different piconets are linked in one node by the link with two bluetooth divices thereby forming the Ad-Hoc network. In this paper, we shows the method of DoublePico which supports about 457kbps of the maximum data transmission rate. This method supports a higher data transmission rate than the traditional bluetooth's Ad-Hoc topology by using analysis and comparison of existing algorithm of bluetooth specification and simulation results. Specifically, this paper focuses on the impact of intererence on the PER (Packet Error Rate), throughput performance, and the throughput improvement with SAW(Stop and Wait)-ARQ scheme in DoublePico.