• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.4
• /
• pp.491-508
• /
• 2010

In peer-to-peer (P2P) on-demand streaming networks, the alleviation of server load depends on reciprocal stream sharing among peers. In general, on-demand video services enable clients to watch videos from beginning to end. As long as clients are able to buffer the initial part of the video they are watching, on-demand service can provide access to the video to the next clients who request to watch it. Therefore, the key challenge is how to keep the initial part of a video in a peer's buffer for as long as possible, and thus maximize the availability of a video for stream relay. In addition, to address the issues of delivering data on lossy network and providing scalable quality of services for clients, the adoption of multiple description coding (MDC) has been proven as a feasible resolution by much research work. In this paper, we propose a novel caching scheme for P2P on-demand streaming, called Dynamic Buffering. The proposed Dynamic Buffering relies on the feature of MDC to gradually reduce the number of cached descriptions held in a client's buffers, once the buffer is full. Preserving as many initial parts of descriptions in the buffer as possible, instead of losing them all at one time, effectively extends peers’ service time. In addition, this study proposes a description distribution balancing scheme to further improve the use of resources. Simulation experiments show that Dynamic Buffering can make efficient use of cache space, reduce server bandwidth consumption, and increase the number of peers being served.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1770-1785
• /
• 2013

In this paper, a multi-hop transmission protocol based on parallel communication of secondary users (SUs) is proposed. The primary multi-hop network coexists with a set of SUs by cooperative spectrum sharing. The main optimization target of our protocol is the overall performance of the secondary system with the guarantee of the primary outage performance. The energy consumption of the primary system is reduced by the cooperation of SUs. The aim of the primary source is to communicate with the primary destination via a number of primary relays. SUs may serve as extra decode-and-forward relays for the primary network. When an SU acts as a relay for a primary user (PU), some other SUs that satisfy the condition for parallel communication are selected to simultaneously access the primary spectrum for secondary transmissions. For the proposed protocol, two opportunistic routing strategies are proposed, and a search algorithm to select the SUs for parallel communication is described. The throughput of the SUs and the PU is illustrated. Numerical results demonstrate that the average throughput of the SUs is greatly improved, and the end-to-end throughput of the PU is slightly increased in the proposed protocol when there are more than seven SUs.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.240-247
• /
• 2006

This paper discusses the optical system design for projection TV using LCOS type micro display, which provides the high resolution, slim depth, and a large screen of more than 60 inches. We analyzed the relationship between the illumination system, projection lens, color separation & recombination system, and micro display. From this quantitative analysis, the starting data for the optimum light engine was defined, and all optical systems were designed by an optimization process. Three RGB panels were proposed for a high luminence system, and the four prisms symmetrically located make equal optical path lengths for the RGB rays. This color separation & recombination system enables the a compact illumination system. Also, in order to the slim light engine with high resolution, the folded projection lens system was designed by inserting a mirror between projection lenses.

• The KIPS Transactions:PartA
• /
• v.14A no.1 s.105
• /
• pp.1-14
• /
• 2007

MPICH-G2 is an MPI implementation to solve complex computational problems by utilizing geographically dispersed computing resources in grid environments. However, the computation nodes in MPICH-G2 are exposed to the external network due to the lack of supporting the private IP clusters, which raises the possibility of malicious security attacks. In order to address this problem, we propose MPICH-GP with a new relay scheme combining NAT(Network Address Translation) service and an user-level proxy. The proxy running on the front-end system of private IP clusters forwards the incoming connection requests to the systems inside the clusters. The outgoing connection requests out of the cluster are forwarded through the NAT service on the front-end system. Through the connection path between the pair of processes, the requested MPI jobs can be successfully executed in grid environments with various clusters including private IP clusters. By simulations, we show that the performance of MPICH-GP reaches over 80% of the performance of MPICH-G2, and over 95% in ease of using RANK management method.

• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.769-785
• /
• 2015

Although timber structures have been extensively used in underground temporary supporting system, their actual performance is poorly understood, resulting in potentially conservative and over-engineered design. In this paper, a novel wireless sensor technology, SmartPlank, is introduced to monitor the field performance of timber structures during underground construction. It consists of a wooden beam equipped with a streamlined wireless sensor node, two thin foil strain gauges and two temperature sensors, which enables to measure the strain and temperature at two sides of the beam, and to transmit this information in real-time over an IPv6 (6LowPan) multi-hop wireless mesh network and Internet. Four SmartPlanks were deployed at the London Underground's Tottenham Court Road (TCR) station redevelopment site during the Stair 14 excavation, together with seven relay nodes and a gateway. The monitoring started from August 2013, and will last for one and a half years until the Central Line possession in 2015. This paper reports both the short-term and long-term performances of the monitored timber structures. The grouting effect on the short-term performance of timber structures is highlighted; the grout injection process creates a large downward pressure on the top surface of the SmartPlank. The short and long term earth pressures applied to the monitored structures are estimated from the measured strains, and the estimated values are compared to the design loads.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.56-64
• /
• 2017

A high altitude long endurance aircraft which carries out missions of environmental research communication relay or ground surveillance, should have the capacity to cruise in the stratosphere at a relatively low speed for a long dwell time without the necessity of refueling. When one considers the propulsion system for such an aircraft, a reciprocating engine with a serial turbo-charger system to boost rarefied ambient air up to sea level condition, would represent an good, informed and practical choice regardless of the cruising altitude of the aircraft. In this paper, high altitude long endurance aircraft developed by overseas research groups and research trends, regarding multi-stage turbocharger systems, are introduced.

• Animal cells and systems
• /
• v.9 no.3
• /
• pp.139-144
• /
• 2005

The attractant (orange light) or repellent (white light) signal is transmitted from SRI (Sensory Rhodopsin I) via protein-protein interaction with its transducer Htrl (Halobacterial Transducer for Sensory Rhodopsin I) which in turn controls a cytoplasmic phospho-transfer pathway that modulates flagella motor switching in Halobacterium salinarum. Some mutations in both SRI and Htrl showed an unusual mutant phenotype called inverted signaling, in which the cell produces a repellent response to normally attractant light. Twelve mutations at the Glutamate 56 (E56) position in the second transmembrane helix of Htrl were introduced by site-specific random mutagenesis. Almost all E56 mutants showed orange-light inverted responses in pH and temperature-dependent manners except E56D and E56Y. Except for these two mutants, all mutants accelerated the $S_{373}$ decay compared to wild-type at $18^{\circ}C$. This supported that there is an interaction between SRI and the second transmembrane of Htrl. Also a structural model of Htrl based on the Tar crystal structure and the secondary structure prediction program proposed the E56 residue to be in the middle of the proton channel. The most important observation is that the E56 mutant provides the evidence that this residue is very sensitive for signal relay, which can be explained by the open and closed conformations of the channel (A and R conformations) in SRI, as was postulated by the unified conformational shuttling model for transport and signaling.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.2
• /
• pp.46-53
• /
• 2007

Extension of the mobile communication and the rapidly developing services connected with wireless multimedia(W-CDMA, DMB, Wibro, and so on) need great many base station transceiver systems, antennas, and many signal transmission line to embody these services. The min communication appliances system is exposed always in danger of transient overvoltage by direct stroke or induced lightning surge flowing in through antenna because the antenna of base station transceiver system or relay equipment is combined with expensive communication network equipments through signal transmission line. Now, gas discharge tube(GDT) or narrow band stub arrestor which is used by the surge protector for communication use is exposing limitations as for lightning surge protective means of the communication facility with high speed and wide frequency band. Therefore, for improving performance of surge arrestor, we applied ceramic filter which can reduce lightning surge invading from antenna effectively, and proved that ceramic filter is effective in residual voltage reduction through the experimental research.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.4
• /
• pp.307-314
• /
• 2013

Infrared optical systems are operated at low temperature and vacuum (LT-V) condition, whereas the assembly and alignment are performed at room temperature and non-vacuum (RT-NV) condition. The differences in temperature and pressure between assembly/alignment environments and operation environment change the physical characteristics of optical and opto-mechanical parts (e.g., thickness, height, length, curvature, and refractive index), and the resultant optical performance changes accordingly. In this study, using input relay optics (IO), among the components of the Immersion GRating INfrared Spectrograph (IGRINS) which is an infrared spectrograph, a simulation based on the physical information of this optical system and an actual experiment were performed; and optical performances in the RT-NV, RT-V, and LT-V environments were predicted with an accuracy of $0.014{\pm}0.007{\lambda}$ rms WFE, by developing an adaptive fitting line. The developed adaptive fitting line can quantitatively control assembly and alignment processes below ${\lambda}/70$ rms WFE. Therefore, it is expected that the subsequent processes of assembly, alignment, and performance analysis could not be repeated.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.45-58
• /
• 2019

As modern people's daily lives are becoming more harsh in Korea, the so-called Kidults generation has appeared since a few years ago as adults have come back to their childhood sensibility and are exposed to various cultures online, and there are many people who have a hobby for collecting toys. However, as there is currently no formalized system for individual toy trade online, it is difficult to acquire expertise and share information with each other through a major portal site's $caf{\acute{e}}$, and is exposed to security or fraud while trading toys. In this paper, we design and implementation of a web-based toy trading system. Analyzing the advantages and disadvantages of the various trading and relay systems currently in use, it will provide opportunities for professional toy knowledge and information exchange to many users who have a hobby of collecting toys, and will greatly help vitalize the toy market through a secure and convenient trading environment between individuals.