• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.1057-1063
• /
• 1994

An instantaneous frequency analysis is a technique to examine a signature for the rotating machinery if the signal has several transitions within a cycle. This paper discusses the conditions of existing negative frequency components in the instantaneous frequency. By using a signal consisted of two frequency components, the instantaneous frequency analysis is conducted while the amplitude ratio between two frequency components has been changed. The analysis shows that, depending on the amplitude ratio, the instantaneous frequencies have averaged, zero-valued, or negative components. It turns out that the negative-valued instantaneous frequencies, which have been regarded as the noise effect, are the consequence of the calculation process for the multisignal components. The criteria of existing the negative values in instantaneous frequencies is given in terms of the relative amplitude ratio and the frequency difference. Especially when the amplitude ratio approaches to 1, the instantaneous frequency fluctuates ${\pm}\infty$ in theory, which implies that instantaneous frequency has unstable region around the amplitude ratio, 1.Also, as the frequency difference between major signal components is increased, the region of existing negative instantaneous becomes broader. In an instantaneous frequency analysis, therefore, a narrow band analysis is suggested, with extreme care if the amplitude ratio approaches to 1. In this paper, a vibration signal monitored from a rotating machinery is also examined as an application example in order to show the existence of negative instantaneous frequencies components.

• The Korea Journal of Herbology
• /
• v.33 no.5
• /
• pp.105-110
• /
• 2018

Objectives : We tried to observe the fluorescence anisotropy and intensity of ethidium ion in the intercalating binding interaction between DNA and ethidium ions in the presence of berberine, and then tried to explain the effect of berberine on the intercalating interaction of ethidium ion with DNA. Methods : DNA(calf thymus DNA), berberine and ethidium bromide(EtBr) were purchased from Sigma-Aldrich Co. Proper amount of each compound was dissolved in 20 mM sodium phosphate buffer(pH 7.0) containing 100 mM of NaCl to prepare stock solutions. Collections of the fluorescence anisotropy and intensity data were performed on JASCO FP-8300 spectrofluorometer equipped with a polarizer and a Peltier temperature controller. The excitation of ethidium ion was done at 550 nm and the emission data were collected at 600 nm. For Stern-Volmer plot, the fluorescence data were collected at $18^{\circ}C$ and $30^{\circ}C$. Results : According to the results of this research, the weak competitive binding pattern between ethidium ion and berberine appeared in binding with DNA at low ratio of DNA to ethidium ion. But at high ratio of DNA to ethidium ion, this weak competition disappeared. Instead, berberine might bind to DNA by intercalating way. In other words, berberine could de-intercalate ethidium ion from DNA at low concentration of DNA relative to ethidium ion, but could not at high concentration of DNA relative to ethidium ion. In addition, the mechanism of fluorescence quenching of ethidium ion could also proceed differently, depending on the ratio of the amount of DNA to that of ethidium ion. Conclusions : The effect of berberine on the DNA-ethidium ion intercalating interaction could work differently, depending on the relative ratio of the amount of DNA to that of ethidium ion. This study also showed that fluorescence anisotropy analysis is very useful method to obtain detailed information for investigation of the complex binding interactions. In order to fully understand the mechanism of action of the pharmacological effect by berberine, studies on the effect of berberine on the action of proteins such as various enzymes closely related to berberine-induced medicinal effects should be continued.

• Economic Analysis
• /
• v.27 no.2
• /
• pp.71-123
• /
• 2021

In this study, we present a methodology and model to estimate land prices and the value of land assets in North Korea in the absence of any data about land characteristics from North Korean authorities. Using this framework, we experimentally make market price-based estimates for land assets across the entire urban area of North Korea. First, we estimate the determinants of land prices in South Korea using data on market prices of land from the late 1970s, when it was estimated that the income level gap between South Korea and North Korea wasn't relatively large, and from the early 1980s, when urbanization levels in both of them were similar. Second, we calculate land prices and their relative ratios for each city and urban area in North Korea around 2015 by substituting proxy variables of determinants of land prices derived through a geographic information analysis of North Korea into the function of land prices that we have already estimated. Finally, we estimate the value of land assets in urban areas across North Korea by combining the ratio of housing transaction prices surveyed in several cities in North Korea with the relative prices estimated in this research. As a result, land prices in urban areas in North Korea, looking at the relative ratio of price by city, are estimated to be the highest, at 100.00, in Tongdaewon district of Pyongyang, and to be the lowest, at 1.70, in Phungso county, Ryanggang Province. Meanwhile, the value of land assets in urbanized areas was estimated at $21.6 billion in 2015, which was 1.2 to 1.3 times the GDP of North Korea that year. This ratio is similar to South Korea's in the 1978-1980 period, when the South Korean economy grew at an average rate of 6%. Considering North Korea's growth rate of about 1% in the 2013-2014 period, its ratio of land assets to GDP appears very high.

• Journal of Korean Medicine for Obesity Research
• /
• v.10 no.1
• /
• pp.41-48
• /
• 2010

Background The length of the second digit (the index finger) relative to the length of the fourth digit (the ring finger) is sexually dimorphic as males have a lower second to fourth digit ratio (2D:4D). There is evidence that sex differences in 2D:4D arise from in utero concentrations of sex steroids, with a low 2D:4D (male typical ratio) being positively related to prenatal testosterone, while a high 2D:4D (female typical ratio) is positively associated with prenatal oestrogen Objective To investigate possible associations between 2D:4D ratio and sexually dimorphic body composition Methods 2D:4D ratio, body mass index (BMI), waist circumference, waist-hip ratio (WHR), weight, and body fat percentage was measured from 46 men and 20 women Results Digit ratio was found to be significantly lower in men than in women. No significant correlation between 2D:4D ratio and body compositions was found for both men and women while digit ratio in obese men was significantly higher than normal weight men. Conclusion This finding dose not support the significant correlation between digit ratio and sexually dimorphic body composition. However digit ratio in obese men was significantly higher than normal weight men.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1417-1431
• /
• 1994

In this study, shear strength characteristics of the Nak-Dong river sand in Taegu area are investigated by triaxial compression test, considering shear strain control velocity, relative density, and confining pressure. The results from Lade model and Modified Lade model are compared with the measured value in the laboratory test. The results by the change of shear strain control velocity, relative density, and confining pressure are as follows; 1) The stress limit, which can be Coulomb's law about the Nak-Dong river sand, have ranged 120~200 kpa at 0.08%/min and 120~150 kpa at 0.5%/min. These limits are smaller than that of the calcareous sand and the well-graded, quartz sand. 2) The parameters needed to Lade model and Modified Lade model are much affected by the strain control velocity and the relative density. Consequently, in the field, it is important to use parameters aptly after accurately understanding both the loading condition and subsoil condition. 3) Overall, the principal stress ratio obtained from constitutive model equations is not affected by the control velocity, but both the relative density and confining pressure affect the result of constitutive model equations. Consequently, the study on the various conditions about the relative density and confining pressure is needed to accurately predict the stress-strain behavior on the Nak-Dong river sand. 4) For the range of the used confining pressure in the study, the Lade model shows better agreements with the measured value than the Modified Lade model, comparing the measured value with the principal stress ratio at failure and the internal friction angle of failure envelope obtained from the Lade model and Modified Lade model.

• Journal of Advanced Navigation Technology
• /
• v.26 no.3
• /
• pp.160-165
• /
• 2022

In this paper, we have proposed a magnetic resonant 6.78MHz WPT(wireless power transfer) technique which can be applied to a fixed transmitter and a receiver of varying relative distance and coil alignment, Power transmission characteristics are studied with the relative distance and misalignment ration of coil area between the transmitting and receiving coils. The coils are designed with the size of 60×80mm² by direct feeding method, and the characteristics are derived with the maximum relative distance of 50mm and horizontal area misalignment state of 0-40mm misalignment of coil center axis in the XY plane. The power transmission characteristics are compared between the 3D EM simulation and the measured data, and the power transmission shows larger than -3dB performance with the vertical distance of up to 30mm and 50% area misalignmment ratio. This work showsthe transmission characteristics according to relative distance and misalignment state between the cols and that direct feeding has advantage for the short relative distance and small misalignment ratio.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.3
• /
• pp.91-98
• /
• 1998

In this study, the hydrological changes due to urbanization were investigated and fundamental theory and characteristics of typical urban runoff model such as ILLUDAS was studied. Above model was applied for urbanizing Dongsucheon basin, Incheon. The main parameters (II, IA, IS) which are included in model depending on runoff results were determined, and dimensionless values such as total runoff ratio($Q_{TR}$), peak runoff ratio($Q_{PR}$), and runoff sensitivity ratio ($Q_{SR}=Q_{TR}/Q_{PR}$) were estimated in order to evaluate and compare the characteristics of model based on relative sensitivity analysis.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.26-27
• /
• 2015

The purpose of this study was to investigate the compressive strength property into concrete using rice straw ash.. In an effort to evaluate the effects of rice straw ash as mineral admixture, rice straw ash was mixed with cement at the mixture ratio of 0, 5, 10 and 15% relative to the cement weight. When the mixture ratio of rice straw ash was 10%, the highest compressive strength was observed, while the strength tended to decrease when the mixture ratio of rice straw ash was 15% even if it exhibited higher compressive strength than the plain. And it was observed that compressive strength of concrete containing rice husk ash was a similar a compressive strength of concrete containing silica fume.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.139-145
• /
• 2006

The purpose of this study is to obtain low-emission and high-efficiency in LPG engine with hydrogen enrichment. The objective of this paper is to clarify the effects of hydrogen enrichment in LPG fuelled engine on exhaust emission, thermal efficiency and performance. The compression ratio of 8 was selected to avoid abnormal combustion. To maintain equal heating value of fuel blend, the amount of LPG was decreased as hydrogen was gradually added. The relative air-fuel ratio was increased from 0.8 to 1.3, and the ignition timing was controlled to be at MBT (minimum spark advance for best torque)

• The Journal of Korean Physical Therapy
• /
• v.24 no.6
• /
• pp.393-397
• /
• 2012

Purpose: We investigated to identify the effect of robo-horseback riding exercise (RHRE) on trunk muscle activity ratios for patients with low back pain. Methods: Twelve patients with low back pain and twelve healthy adults were recruited for this study. Subjects performed the RHRE with the neutral spine position. The amplitude of electromyography activity was recorded from the selected trunk muscles (internal oblique [IO], rectus abdominis [RA], multifidus [MF], the thoracic part of the iliocostalis lumborum [ICLT]). The ratios of the relative local muscle activity to the global muscle activity in abdominal and lumbar parts were calculated. Results: There were significant differences in the change values of the IO/RA and the MF/ICLT between low back pain (LBP) patients and healthy adults. The IO/RA ratio and the MF/ICLT ratio showed significant increase in LBP patients after training. Conclusion: The RHRE improved the trunk muscle activity ratio in patients with low back pain. The information presented here is important for investigators who use lumbar stabilization exercises as a rehabilitation exercise.