• Speech Sciences
• /
• v.8 no.4
• /
• pp.171-184
• /
• 2001

American English vowels and Korean vowels were compared by the plotformant method. For American English vowels, six General American English speakers pronounced English words in the b_t environment. For Korean vowels eight Kyongsang dialect speakers and eight Seoul dialect speakers pronounced Korean words in the environments of k_t, p_t and t_t. The formant plots were obtained by plotting F1/F2 tokens of 13 American English vowels on the F1xF2 plane. In spite of personal variations the 13 vowel spaces of all six American English speakers maintained their relative positions with some overlaps. Clear distinctions were made between i-I, e-$\varepsilon$, u-$\sigma$, and o-c. The domain of c and $\alpha$ overlapped for three American English speakers, but it did not for three other speakers. The 8 Korean vowel spaces of Kyongsang dialect speakers and Seoul dialect speakers were very similar and maintained their relative positions. No distinction was made between e and $\varepsilon$. In contrast with American English e which is a neutral vowel, Korean e was a back vowel. The comparison of 13 American English vowel positions and 8 Korean Vowel positions is expected to shed some light on the errors of English vowel pronunciation of Korean learners.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.469-475
• /
• 2003

The performance of a centrifugal compressor composed of an impeller, tandem diffuser rows and axial guide vanes has been predicted numerically and compared with available experimental results on its design rotational speed. The pitchwise-averaged mixing plane method was employed for the boundaries between rotor and stator to obtain steady state solutions. The overall characteristics showed differently according to the relative positions of tandem diffuser rows while the characteristics of impeller showed almost identical. The numerical results agree with the measured data in respect of their tendency. It turned out that 0% of relative positions is the worst case in terms of static pressure recovery and efficiency. According to the experimental results, some pressure fluctuations and malfunction of the compressor were observed for 75% case. However, this numerical calculation using mixing plane method did not capture any of those phenomena. Thus, unsteady flow calculation should be performed to investigate the stability of the compressor caused by different diffuser configuration.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.59-74
• /
• 2009

Relative navigation system is presented using GPS measurements from a single-channel global positioning system (GPS) simulator. The objective of this study is to provide the real-time inter-satellite relative positions as well as absolute positions for two formation flying satellites in low earth orbit. To improve the navigation performance, the absolute states are estimated using ion-free GRAPHIC (group and phase ionospheric correction) pseudo-ranges and the relative states are determined using double differential carrier-phase data and singled-differential C/A code data based on the extended Kalman filter and the unscented Kalman filter. Furthermore, pseudo-relative dynamic model and modified relative measurement model are developed. This modified EKF method prevents non-linearity of the measurement model from degrading precision by applying linearization about absolute navigation solutions not about the priori estimates. The LAMBDA method also has been used to improve the relative navigation performance by fixing ambiguities to integers for precise relative navigation. The software-based simulation has been performed and the steady state accuracies of 1 m and 6 mm ($1{\sigma}$ of 3-dimensional difference errors) are achieved for the absolute and relative navigation using EKF for a short baseline leader/follower formation. In addition, the navigation performances are compared for the EKF and the UKF for 10 hours simulation, and relative position errors are mm-level for the two filters showing the similar trends.

• The Journal of Korean Medicine
• /
• v.28 no.3 s.71
• /
• pp.13-22
• /
• 2007

Objectives : To obtain pulse information, oriental medical doctors usually use the three finger pulse diagnosis method. Although the diagnostic positions are very important, the exact positions are not known because of the uncertain conversion of measures of length (bun, chon, chuk) and misunderstanding of the related concepts of oriental medicine. In this study, we proposed relative positions for the detection of three pulses with a pulse analyzer. Methods : The proposal was made based mainly on several literature reviews, especially the original texts, and the examination of anthropometric characteristics of 78 individuals. Results : The Kwan is the spot where the radial pulse can be felt well near the eminent head of the radius at wrist, high bone. The position of Chon should be apart from Kwan by 6/10 distance between the high bone and wrist joint of each individual. Finally, the position of Chuk is apart from Kwan by 6.5/100 distance between the high bone and the elbow joint of each individual. Conclusions : Adapting those proposed positions for measuring three pulses can provide more consistent information to what an oriental doctor obtains than a pulse analyzer applied to other positions.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.318-324
• /
• 1998

This study was conducted to derive optimal design floods by Generalized Extreme-value(GEV) distribution for the annual maximum series at ten watersheds along Han, Nagdong, Geum, Yeongsan and Seomjin river systems. Adequacy for the analysis of flood data used in this study was established by the tests of Independence, Homogeneity, detection of Outliers. L-coefficient of variation, L-skewness and L-kurtosis were calculated by L-moment ratio respectively. Parameters were estimated by the Methods of Moments and L-Moments. Design floods obtained by Methods of Moments and L-Moments using different methods for plotting positions in GEV distribution were compared by the relative mean and relative absolute error. It was found that design floods derived by the method of L-moments using weibull plotting position formula in GEV distribution are much closer to those of the observed data in comparison with those obtained by method of moments using different formulas for plotting positions in view of relative mean and relative absolute error.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.125-130
• /
• 2001

Skilled typists can type characters or words without looking at keyboard, relying on the finger's relative position. If the relative positions of the fingers can be identified, a virtual keyboard may be accomplished by applying the concept of "DataGlove" or "FingerRing". The virtual keyboard may be efficient as a new mobile input device supporting QWERTY keyboard layout. For the purpose of investigating skilled typing pattern, in this paper the touch-positions of the fingers are measured with a touchscreen while five skilled typists type a long sentence. From these measurements it can be observed that the groups of touch-positions are classified into alphabet characters. Though there are some overlapped groups we can find constant distances capable of being discriminated among the groups from investigation of the change of touch-position for touch-time. Based on the analysis, the prediction algorithm of the constant distance is proposed and evaluated, which is useful for realization of a portable virtual keyboard.le virtual keyboard.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.153.4-153
• /
• 2001

Skilled typists can type characters or wrds without looking at keyboard, relying on the finger´s relative position. If the relative positions of the fingers can be identified, a virtual keyboard may be accomplished by applying the concept of "DataGlove" or "FingerRing". The virtual keyboard may be efficient as a new mobile input device supporting QWERTY keyboard layout. For the purpose of investigating skilled typing pattern, in this paper the touch-positions of the fingers are measured with a touchscreen while four skilled typists type a long sentence. From these measurements it can be observed that the groups of touch-positions are classified into alphabet characters. Though there are some overlapped groups we can find constant distances capable of being discriminated ...

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.2 s.23
• /
• pp.27-34
• /
• 2004

The performance of a centrifugal compressor composed of an impeller, tandem diffuser rows and axial guide vanes has been predicted numerically and compared with available experimental results on its design rotational speed. The pitchwise-averaged mixing plane method was employed for the boundaries between rotor and stator to obtain steady state solutions. The overall characteristics showed difference according to the relative positions of tandem diffuser rows while the characteristics of impeller showed almost identical result. The numerical results agree with the measured data in respect of their tendency. It turned out that $0\%$ of relative positions is the worst case in terms of static pressure recovery and efficiency. According to the experimental results, some pressure fluctuations and malfunction of the compressor were observed for $75\%$ case. However, this numerical calculation using mixing plane method did not capture any of those phenomena. Thus, unsteady flow calculation should be performed to investigate the stability of the compressor caused by different diffuser configuration.

• Journal of computational fluids engineering
• /
• v.11 no.4 s.35
• /
• pp.1-8
• /
• 2006

Clocking effects of a stator on the performance and internal flow in an UTRC 1.5 stage axial turbine are investigated using a three-dimensional unsteady flow simulation. Six relative positions of two rows of stator are investigated by positioning the second stator being clocked in a step of 1/6 pitch. The relative efficiency benefit of about 1% is obtained depending on the clocking positions. However, internal flows have some different characteristics from that in the previous study at the best and worst efficiency positions, since the first stator wake is mixed out with the rotor wake before arriving at the leading edge of the second stator. Instead of the first stator wake, it is found that the wake interaction of the first stator and rotor has a important role on a relative efficiency variation at each clocking position. The time-averaged local efficiency along the span at the maximum efficiency is more uniform than that at the minimum efficiency. That is, the spanwise efficiency distribution at the minimum efficiency has larger values in mid-span but smaller values near the hub and casing in comparison to those at the maximum efficiency. Moreover, the difference between maximum and minimum instantaneous efficiencies during one period is found to be smaller at the maximum efficiency than at the minimum efficiency.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.3
• /
• pp.30-38
• /
• 2010

Experiments were performed to investigate the flow characteristics of a partial admission supersonic turbine depending on the relative positions of nozzle and cascade. The flow was visualized by a Schlieren system. The static pressures at the turbine cascade inlet, passage and outlet were measured by pressure transducers. Highly complicated flow patterns including shocks, nozzle-cascade interaction and shock boundary layer interactions of the supersonic turbine were observed by the experiments. And the flow characteristics in the supersonic turbine as the relative positions were observed.