• 대한소아치과학회지
• /
• 제31권2호
• /
• pp.273-279
• /
• 2004

최근에 소개된 single high-intensity LED 중합기는 이전의 LED 중합기에 비해 높은 광도를 가지며 짧은 중합시간에 적절한 물성을 가질 수 있다고 한다. 본 연구는 single high-intensity LED 중합기의 중합성능을 평가하기 위하여 거리에 따른 중합도를 조사하였다. Mylar strip사이에 복합레진(Filtek Z250)을 넣고 압접시켜 만든 얇은 필름형 시편을 LED 중합기(Elipar Freelight 2, 10초), 플라스마 중합기(Flipo, 6초)와 할로겐 중합기 (XL3000, 20초)를 사용해 0mm, 2mm, 4mm, 6mm에서 광도를 측정하고 중합시켰다. 중합된 시편을 Fourier Transform Infrared Spectrometer(FTIR)를 이용해 중합도를 측정한 후 다음과 같은 결론을 얻었다. 1. 모든 중합기에서 거리가 증가할수록 유의하게 광도가 감소하였으며 LED중합기의 경우 6mm에서 다른 중합기에 비해 가장 많은 광도 감소율을 보였다(p<0.05). 2. 모든 중합기에서 거리가 증가함에 따라 4mm까지는 중합도가 감소하였지만 유의한 차이는 보이지 않았다(p>0.05). 하지만 4mm와 6mm사이에서는 모든 중합기에서 유의하게 감소하였다(p<0.05). 3. 각 거리에 따른 중합기간의 중합도 차이는 0mm, 2mm, 4 mm에서 LED중합기가 다른 중합기보다 유의하게 높은 중합도를 보였으며 (p<0.05) 플라스마 중합기와 할로겐 중합기 사이에서는 유의한 차이가 없었다. 하지만 6 mm에서는 모든 중합기 사이에 유의한 차이를 보이지 않았다(p>0.05).

• 생물환경조절학회지
• /
• 제31권1호
• /
• pp.60-66
• /
• 2022

본 연구는 파프리카 육묘 시 다양한 LED 광질(red:blue = 10:0, 8:2, 2:8, white)에 따른 생육변화에 대하여 구명하여 수경재배용 묘 생산을 위한 전용육묘장의 기반기술로 활용하고자 수행하였다. 초장과 줄기직경의 생육은 red 비율이 높을수록 유의하게 길거나 굵었고, 엽면적은 LED red:blue = 8:2에서 가장 넓었다. 건물 중량도 엽면적과 동일한 경향이었다. LED white에서는 모든 묘의 소질에서 다른 처리들보다 뚜렷하게 저조하였다. 상대생장률은 red 비율이 높을수록 높은 경향을 나타내었고 순동화율은 blue 비율이 높을수록 높은 경향을 나타내었다. 따라서 본 시험에서 LED를 활용한 파프리카 육묘 시 초장, 엽면적, 단위엽면적당 건물생산능력 등을 고려하였을 때 혼합광을 이용하는 것이 적합하고 특히, LED red:blue = 8:2가 가장 적합한 것으로 생각된다. 그리고 red와 blue 파장의 적절한 혼합 비율을 통해 파프리카 묘의 초장 및 절간장을 제어할 수 있을 것으로 생각된다.

• 한국대기환경학회지
• /
• 제29권6호
• /
• pp.745-756
• /
• 2013

The purpose of this study is to evaluate representativeness of fuel-based emission factors. Twelve light-duty diesel vehicles which meet Euro-3 to 5 legislative emission limits were selected for emission tests. Second-by-second modal emission rates of vehicles were measured on a standard laboratory chassis dynamometer system. An off-cycle driving cycle was developed as a representative Korean real-world on-road driving cycle. Fuel-based emission factors were developed for short trip segments that involved in the selected driving cycle. Each segment was defined to have unit travel distance, which is 1 km, and characterized by its average speed and Relative Positive Acceleration (RPA). Fuel-based $NO_x$ emission factors demonstrate relatively good representativeness in terms of vehicle operation conditions. $NO_x$ emission factors are estimated to be within ${\pm}20%$ of area-wide emission factor under more than 40% of total driving situations. This result implies that the fuel-based $NO_x$ emission factor could be practically implemented into the on-road emission management strategies, such as a remote sensing device (RSD). High emitting vehicles as well as high emitting operating conditions heavily affect on the mean values and distributions of CO and THC emission factors. Few high emitting conditions are pulling up the mean value and biasing the distributions, which weaken representativeness of fuel-based CO and THC emission factors.

• 반도체디스플레이기술학회지
• /
• 제12권2호
• /
• pp.13-17
• /
• 2013

In lighting system where several large-area organic light-emitting diode (OLED) lighting panels are involved, panel aging may appear differently from each other, resulting in a falling-off in lighting quality. To achieve uniform light output across large-area OLED lighting panels, we have employed an optical feedback circuit. Light output from each OLED panel is monitored by the optical feedback circuit that consists of a photodiode, I-V converter, 10-bit analogdigital converter (ADC), and comparator. A photodiode generates current by detecting OLED light from one side of the glass substrate (i.e., edge emission). Namely, the target luminance from the emission area (bottom emission) of OLED panels is monitored by current generated from the photodiode mounted on a glass edge. To this end, we need to establish a mapping table between the ADC value and the luminance of bottom emission. The reference ADC value corresponds to the target luminance of OLED panels. If the ADC value is lower or higher than the reference one (i.e., when the luminance of OLED panel is lower or higher than its target luminance), a micro controller unit (MCU) adjusts the pulse width modulation (PWM) used for the control of the power supplied to OLED panels in such a way that the ADC value obtained from optical feedback is the same as the reference one. As such, the target luminance of each individual OLED panel is unchanged. With the optical feedback circuit included in the lighting system, we have observed only 2% difference in relative intensity of neighboring OLED panels.

• 한국환경보건학회지
• /
• 제44권1호
• /
• pp.1-14
• /
• 2018

Objectives: The purpose of this study is to investigate the main cause of visibility impairment by analyzing the contributions of the light extinction coefficient of major air pollution components and the change of the light extinction coefficient by relative humidity. Methods: The characteristics of the light extinction coefficient calculated by the photochemical method using fine particle component data measured in 2015 in the Gwangju area were examined. Results: The extinction efficiency per unit mass of $PM_{2.5}$ particles was $4.5m^2/g$ and that of $PM_{10-2.5}$ particles was $0.6m^2/g$. This difference indicates that most of the visibility impairment in Gwangju was caused by $PM_{2.5}$ particles. When visibility was poor, the contribution of ammonium sulphate and ammonium nitrate was significantly increased. Relative humidity was also a major cause of visibility decay. The influx of air currents in Gwangju was mostly caused by the long distance movement of pollutants emitted from the eastern part of China. Ammonium sulphate and ammonium nitrate, which are hygroscopic secondary contaminants, were the main causative agents of visibility impairment. Conclusions: Ammonium sulphate and ammonium nitrate were the main causative agents of visibility impairment in Gwangju. The influx of air currents in Gwangju was mostly caused by the long distance movement of pollutants emitted from the eastern part of China.

• 한국도서관정보학회지
• /
• 제40권1호
• /
• pp.253-274
• /
• 2009

효율성은 산출물의 가치와 그 산출물의 생산과정에서 소요되는 투입물가치의 비율로 나타낸다. DEA모형은 효율성을 여러 가지 투입물의 가중평균에 대한 산출물 가중평균의 비율로 표시하며, 특정 의성결정단위의 효율성을 유사한 투입 산출구조를 가지는 준거집단과 비교함으로써 상대적인 측면에서 측정하는 방법이다. 본 연구는 DEA모형을 이용하여 국립대학도서관의 효율성과 효율성 개선에 관한 분석을 시도하였다. 투입변수로는 직원수, 시설면적, 예산, 장서량을 사용하였고, 산출변수로는 자료실이용자수, 대출책수, 상호대차이용건수를 사용하였다. 그 결과 전국 26개의 국립대학도서관 중 효율적인 도서관은 2007년, 2006년, 2005년에 각각 10개, 9개, 9개로 나타났다. 또한 비효율적인 국립대학도서관의 경우 투입물을 줄이고, 산출물을 늘여야 할 정보들을 제시하였다.

• 상하수도학회지
• /
• 제9권4호
• /
• pp.63-72
• /
• 1995

The mean velocity gradient, G, has been used as a principal design and operation parameter for flocculation unit. This paper questions that significance. The physical and qualitative meaning of collision efficiency factors of each transport mechanism (Brownian motion, fluid shear, and differential sedimentation) are reviewed. The overall collision frequency function is calculated by summing up the collision frequency function of each mechanism. In the collision of two particles of different size, a diagram showing the dominant region in which each mechanism is important is developed and the meaning of the diagram is discussed. The primary ramification of this curvilinear, heterodisperse approach is that G is found to be not nearly so important. Previous experimental work in which the role of G has been examined is reviewed in light of this finding.

• 한국미생물·생명공학회지
• /
• 제27권4호
• /
• pp.278-285
• /
• 1999

In order to use heat shock promoter for the detection of toxic substances, dnaK promoter was amplified from E. coli genomic DNA by using a polymerase chain reaction(PCR) followed by sequencing and sub-cloning into the multi-cloning site of the plasmid, pUCD615. The pUCD615 is a broad-host-range vector containing promoterless lux operon originated from V.fischeri. The recombinant plasmid was transfered to E. coli DH5$\alpha$ through electroporation. The recombinant E. coli showed several patterns of bioluminescent responses to ethanol stress. The bioluminescent E. coli also showed responses to other toxic substances including FeK3(CN)6, CdCl2, p-nitrophenol and HgCl2. The increases of RLU(Relative Light Unit) were observed at 100ppm of FeK3(CN)6, 10ppm and 100ppm and 100ppm of CdCl2, 1ppm of 10ppm of p-nitrophenol and at 1ppm of HgCl2.

• 제어로봇시스템학회논문지
• /
• 제21권5호
• /
• pp.459-464
• /
• 2015

An on-line quality control of hot steel products is one of the important issues in the steel industry because of cost minimization. In recent years, relative depth information of surface defects is increasingly required for strict quality control. In this paper, a 3D shape reconstruction scheme for defects on a hot steel surface based on a multi-spectral photometric stereo method is proposed. After simultaneously illuminating a hot steel surface by using vertical/horizontal linearly polarized lights of green and blue light sources, the corresponding 4 images are obtained. The photometric stereo method is then applied with the aid of a GPU (Graphic Processing Unit) to reconstruct the shape of the target surface based on these images. The proposed scheme was validated through experiments.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.433-433
• /
• 2010

A microplasma current switch (MPCS) for a device operated in a current mode like organic light-emitting diodes (OLEDs), which features matrix addressability and current switching, is presented as well as its architecture and operational principle. The MPCS utilizes the intrinsic memory and conductivity of plasmas to achieve matrix addressability and current switching. We have fabricated a $100\;mm\;{\times}\;100\;mm$ MPCS panel in which its cell pitch is $1080\;{\mu}m\;{\times}\;1080\;{\mu}m$. The matrix addressability and current switching were verified. In addition, the current-voltage (I-V) characteristic of the unit cell was measured when plasmas were ignited. In principle, the scheme of the MPCS is equivalent to that of a double Langmuir probe diagnosing plasma parameters except for their relative dimensions to a plasma volume. Accordingly, the I-V characteristic was analyzed by a double Langmuir probe theory, and the plasma density and electron temperature were estimated from the I-V curve using a collisional double Langmuir probe theory.