• Computers and Concrete
• /
• v.3 no.2_3
• /
• pp.145-161
• /
• 2006

This article involves architecting prototype-fuzzy expert system for designing the nominal cover thickness by means of fuzzy inference for quantitatively representing the environment affecting factor to reinforced concrete in chloride-induced corrosion environment. In this work, nominal cover thickness to reinforcement in concrete was determined by the sum of minimum cover thickness and tolerance to that defined from skill level, constructability and the significance of member. Several variables defining the quality of concrete and environment affecting factor (EAF) including relative humidity, temperature, cyclic wet and dry, and the distance from coast were treated as fuzzy variables. To qualify EAF the environment conditions of cycle degree of wet-dry, relative humidity, distance from coast and temperature were used as input variables. To determine the nominal cover thickness a qualified EAF, concrete grade, and watercement ratio were used. The membership functions of each fuzzy variable were generated from the engineering knowledge and intuition based on some references as well as some international codes of practice.

• Geomechanics and Engineering
• /
• v.8 no.2
• /
• pp.221-235
• /
• 2015

A series of laboratory model tests were conducted to investigate the effects of buried pipes location on the bearing capacity of strip footing in cohesionless soil. The variables examined in the testing program include relative density of the sand, loading rate of tests, burial depths of pipe and horizontal distance of pipe to footing. The test results showed a significant increase in bearing capacities when embedment ratio of pipe and horizontal distance of pipe to footing were increased. Based on the test results, it can be concluded that the location of pipes and relative density of sand are main parameters that affect the bearing capacity of strip footing. However, loading rate has not considerable effect on bearing capacity.

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.1090-1094
• /
• 2017

The determinants of the public's nuclear power acceptance have received considerable attention as decisive factors regarding nuclear power policy. However, the contingency of the relative importance of different determinants has been less explored. Building on the literature of psychological distance between the individual and the object, the present study demonstrates that the relative effects of different types of perceived risks regarding nuclear power generation differ across acceptance targets. Using a sample of Korea, our results show that, regarding national acceptance of nuclear power generation, perceived risk from nuclear power plants exerts a stronger negative effect than that from radioactive waste management; however, the latter exerts a stronger negative effect than the former on local acceptance of a nuclear power plant. This finding provides implications for efficient public communication strategy to raise nuclear power acceptance.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.6
• /
• pp.321-328
• /
• 2018

This paper presents an automatic target tracking flight system using a PID controller based on velocity command of a multirotor UAV. The automatic flight system includes marker based onboard target detection and an automatic velocity command generation replacing manual controller. A quad-rotor UAV is equipped with a camera and an image processing computer to detect the marker in real time and to estimate the relative distance from the target. The marker tracking system consists of PID controller and generates velocity command based on the relative distance. The generated velocity command is used as the input of the UAV's original flight controller. The operation of the proposed system was verified through actual flight tests using a marker on top of a moving vehicle and tracks it to successfully demonstrate its capability using a quad-rotor UAV.

• Journal of the Korean Society of Combustion
• /
• v.10 no.2
• /
• pp.1-8
• /
• 2005

Incomplete combustion due to quenching in a narrow confinement has been a major problem for realization of a reliable micro combustion device. In most micro combustors, effects of flows are absent in the quenching because the flow is laminar and no severe stretch is present. In such circumstance, quenching is caused either by heat loss or by removal of active radicals to the wall surface of the confinement. An experimental investigation was carried out to investigate the relative significance of these two causes of quenching of a premixed flame. A premixed jet burner with a rectangular cross section at the exit was built. At the burner exit, the flame stands between two walls with adjustable distance. The gap between the two walls at which quenching occurs was measured at different wall surface conditions. The results were analyzed to estimate the relative significance of heat loss to the wall and the removal of radicals at the surface. The measurements indicated that the quenching distance was independent of the wall surface characteristics such as oxygen vacancy, grain boundary, or impurities at low temperature. At high temperature, however, the surface characteristics strongly affect the quenching distance, implying that radical removal at the wall plays a significant role in the quenching process.

• Journal of Computing Science and Engineering
• /
• v.4 no.3
• /
• pp.225-239
• /
• 2010

This paper introduces a new approach to modeling relative distance among nodes under a variety of communication rates, due to node's mobility in Mobile Ad-hoc Networks (MANETs). When mobile nodes move to another location, the relative distance of communicating nodes will directly affect the data rate of transmission. The larger the distance between two communicating nodes is, the lower the rate that they can use for transferring data will be. The connection certainty of a link also changes because a node may move closer to or farther away out of the communication range of other nodes. Therefore, the stability of a route is related to connection entropy. Taking into account these issues, this paper proposes a new routing metric for MANETs. The new metric considers both link weight and route stability based on connection entropy. The problem of determining the best route is subsequently formulated as the minimization of an object function formed as a linear combination of the link weight and the connection uncertainty of that link. The simulation results show that the proposed routing metric improves end-to-end throughput and reduces the percentage of link breakages and route reparations.

• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.69-75
• /
• 2011

This paper investigates phrase positional effects on the timing of F0 (pitch) peaks in Tokyo Japanese disyllabic words with varying accent type (HL or LH) and phrase position (final or non final). The F0 peak timing was normalized by the total word duration ('normalized H timing'). The normalized H timing was significantly affected by accent type and phrase position. The H timing was later in the LH accent type than in the HL accent type, and in non final positions than in final positions. In addition, to examine the validity of the quantitative results, different models of phrase position effects were compared by measuring H timing in two approaches: normalization versus relative distance measures. For the normalization measures, the H timing was measured as the time of the F0 peak divided by the total word duration or by the duration of the tone bearing syllable. For the relative distance measures, the H timing was measured as the distance in milliseconds from the end of the word or from the end of the associated syllable. The best model was the normalization by the total word duration, rather than by the duration of the tone bearing syllable. This means that phrase positional effects on the timing of F0 peaks in Japanese disyllabic words are best modeled in terms of proportion of the total word duration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7A
• /
• pp.1017-1027
• /
• 2000

In this paper, we propose a new coding method based on the distance between vertex segments for vertex positions in the vertex-based shape coding. The pixel lines are divided into the segments of a fixed length, and the segments that have vertex pixels are called vertex segments. We analyze the probability distribution of the relative distance between vertex segments and prove that it depends only on the ratio between the number of vertices and the number of segments. Considering the coding efficiency and implementation complexity, we choose a particular ratio to make a code table. For each input image, the segment size is chosen according tothe ratio, and the relative segment distances are entropy coded. It is shown that the proposed method is efficient for the images with many vertices.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.77-81
• /
• 1989

This experiment was conducted to elucidate the changes of dry matter production in permanent pasture and its relation with relative yield of the 1st cutting, regrowth capacity, and persistance of orchardgrass sward, based on the data of preceeding The results were summarized as follows; 1. Relationship between relative yield of the 1st cutting and regrowth capacity were changed by the times of established pasture. Thus, the relative yield of the 1st cutting have negative significant correlation (P < -0.001) with regrowth capacity. 2. Regrowth capacity(RC) was positively significant correlations with the dry weight of plant (DW/pl.), number of tillers per plant (NT/pl.), plant size(PS) and distance between adjacent plants (DIS) of the 1st cutting. Also, regrowth capacity(RC) was positively correlations with the dry weight of plant (DW/pl.), number of tillers per plant (NT/pl.), stubble diameter(DIA), stubble area(SB), plant size(PS) and distance between adjacent plants(D1S) of the 2nd cutting. 3. The coefficients of regression of the 1st cutting showed a tendency to slightly decrease, on the other hand, the 2nd cutting and total yield were tended to increase by the times of established pasture. 4, Between the regrowth capacity and persistency were may deeply concerned to the changes of dry matter production in permanent pasture. 5. The process of dry matter production in permanent pasture can be shown in following diagrams.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.77-85
• /
• 2016

Purpose: To analyze the relative position of the mandibular foramina (MnFs) in patients diagnosed with skeletal class III malocclusion. Materials and Methods: Computed tomography (CT) images were collected from 85 patients. The vertical lengths of each anatomic point from the five horizontal planes passing through the MnF were measured at the coronoid process, sigmoid notch, condyle, and the gonion. The distance from the anterior ramus point to the posterior ramus point on the five horizontal planes was designated the anteroposterior horizontal distance of the ramus for each plane. The perpendicular distance from each anterior ramus point to each vertical plane through the MnF was designated the horizontal distance from the anterior ramus to the MnF. The horizontal and vertical positions were examined by regression analysis. Results: Regression analysis showed the heights of the coronoid process, sigmoid notch, and condyle for the five horizontal planes were significantly related to the height of the MnF, with the highest significance associated with the MnF-mandibular plane (coefficients of determination ($R^2$): 0.424, 0.597, and 0.604, respectively). The horizontal anteroposterior length of the ramus and the distance from the anterior ramus point to the MnF were significant by regression analysis. Conclusion: The relative position of the MnF was significantly related to the vertical heights of the sigmoid notch, coronoid process, and condyle as well as to the horizontal anteroposterior length of the ascending ramus. These findings should be clinically useful for patients with skeletal class III mandibular prognathism.