• Imaging Science in Dentistry
• /
• v.34 no.1
• /
• pp.13-18
• /
• 2004

Purpose : This study was to evaluate the influence of slice thickness of computed tomography (CT) and rapid protyping (RP) type on the accuracy of 3-dimensional medical model. Materials and Methods: Transaxial CT data of human dry skull were taken from multi-detector spiral CT. Slice thickness were 1, 2, 3 and 4 mm respectively. Three-dimensional image model reconstruction using 3-D visualization medical software (V-works /sup TM/ 3.0) and RP model fabrications were followed. 2-RP models were 3D printing (Z402, Z Corp., Burlington, USA) and Stereolithographic Apparatus model. Linear measurements of anatomical landmarks on dry skull, 3-D image model, and 2-RP models were done and compared according to slice thickness and RP model type. Results: There were relative error percentage in absolute value of 0.97, 1.98,3.83 between linear measurements of dry skull and image models of 1, 2, 3 mm slice thickness respectively. There was relative error percentage in absolute value of 0.79 between linear measurements of dry skull and SLA model. There was relative error difference in absolute value of 2.52 between linear measurements of dry skull and 3D printing model. Conclusion: These results indicated that 3-dimensional image model of thin slice thickness and stereolithographic RP model showed relative high accuracy.

• Physical Therapy Korea
• /
• v.18 no.3
• /
• pp.8-15
• /
• 2011

Abdominal muscle plays a crucial role in postural control and respiration control. However, thickness of abdominal muscle in the paretic side of a hemiplegic patient has not been reported in previous studies. The purpose of this research was to compare lateral abdominal muscle thickness between the nonparetic and paretic side in patients with chronic stroke using rehabilitative ultrasound imaging. Twenty two patients with chronic stroke participated in this study. Absolute thickness of transversus abdominis (TrA), internal oblique (IO) and external oblique (EO) was measured at the end of inspiration and expiration during quiet breathing, and relative thickness was calculated (thickness of each muscle as a percentage of total muscle thickness). Ultrasound imaging was recorded three times and the average value was determined for statistical analysis. Differences in absolute and relative lateral abdominal muscle thickness between the nonparetic and paretic side were assessed with paired t-tests. Absolute muscle thickness of the paretic side TrA was thinner than that of the nonparetic side at the end of inspiration and expiration during quiet breathing. Relative muscle thickness of the paretic side TrA was thinner than the paretic side only at the end of expiration during quiet breathing (p>.05). Therefore, it is necessary to strength TrA in patients with chronic stroke during physical therapy intervention. Further study is needed whether physical therapy intervension will induce TrA thickness in patients with chronic stroke in prospective study design.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.778-783
• /
• 2003

For ac Plasma Display Panel (PDP), the lifetime should be guaranteed over 30000 hours. The lifetime is correlated with the deterioration characteristics for the weakest element in ac PDP. In this paper, in order to improve the lifetime of ac PDP, a short-term relative lifetime test method for a given element in the ac PDP is proposed. By this method, the effects of MgO thin film thickness and deposition rate on the relative lifetime of ac PDP are investigated. The relative lifetime is increased with MgO thin film thickness but it was almost saturated over 5000. The relative lifetime decreased with increase in the MgO deposition rate and increased with Xe% in the working gas of He+Ne+Xe..

• Computers and Concrete
• /
• v.3 no.2_3
• /
• pp.145-161
• /
• 2006

This article involves architecting prototype-fuzzy expert system for designing the nominal cover thickness by means of fuzzy inference for quantitatively representing the environment affecting factor to reinforced concrete in chloride-induced corrosion environment. In this work, nominal cover thickness to reinforcement in concrete was determined by the sum of minimum cover thickness and tolerance to that defined from skill level, constructability and the significance of member. Several variables defining the quality of concrete and environment affecting factor (EAF) including relative humidity, temperature, cyclic wet and dry, and the distance from coast were treated as fuzzy variables. To qualify EAF the environment conditions of cycle degree of wet-dry, relative humidity, distance from coast and temperature were used as input variables. To determine the nominal cover thickness a qualified EAF, concrete grade, and watercement ratio were used. The membership functions of each fuzzy variable were generated from the engineering knowledge and intuition based on some references as well as some international codes of practice.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.31-38
• /
• 2016

The FDS-HCIB method is expanded to simulate water-oil-air flows around oil booms under relative motion, which is intended to increase the thickness of contained oil. The FDS scheme captures discontinuity in the density field and abrupt change of the tangential velocity across an interface without smearing. The HCIB method handles relative motions of thin oil booms with ease. To validate the developed FDS-HCIB code for water-oil-air flow around a moving body, the computed results are compared with the reported experimental results on the shape, length, and thickness of the oil slicks under towing. It is observed that the increase in pressure field between two barriers lifts the oil slick and the interfacial wave propagates and reflects as one barrier gets closer to the other barrier.

• Journal of Community Nutrition
• /
• v.2 no.2
• /
• pp.129-134
• /
• 2000

The purpose of the present study is to evaluate the validity of the BMI as an indicator of obesity for Koreans. The usefulness of the BMI to represent overweight and obesity was evaluated by measuring the relative validity of sensitivity and specificity, and was compared with the validity of triceps skinfold thickness(mm). To measure the relative validity of the BMI and triceps skinfold thickness, body fat(%) was used as a reference measure of obesity. The study population included 844 participants aged 20-69 years who resided in Kuri City in Kyunggi province. Participants were measured regarding weight, height, triceps skinfold thickness and body fat. The prevalence of obesity for male subjects was 32.0%, 66.2%, and 0.9%, and for female subjects, 17.6%, 56.1%, 12.4% based on the BMI, triceps skinfold thickness, and body fat(%) respectively. The prevalence of obesity was higher based on the BMI or triceps skinfold thickness than body fat measurement. The sensitivity and specificity of the BMI were 33.3% and 67.9% in male subjects and 77.7% and 90.8% in female subjects. Sensitivity of the BMI was lower, and specificity was higher than those of triceps skinfold thickness. In summary, BMI as an indicator of obesity for Korean showed a tendency of overestimation of obesity prevalence. Therefore, there is a need to develop a more reliable obesity index other than the BMI for Koreans.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.143-150
• /
• 2003

Frictional properties of ultra-thin carbon coatings on silicon wafer were investigated based on Taguchi experimental design method. Sensitivity analysis was performed with normal load, relative humidity, deposition process, and coating thickness as the variables. It was found that despite low thickness, the carbon coating resulted in relatively low friction coefficient. Also, the frictional behavior was affected significantly by humidity and normal load.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.7
• /
• pp.1117-1123
• /
• 1997

This paper describes the measurement of thickness of still air layer above fabrics and its relationship to structural properties of fabrics. Rayon fabrics - of both filament and spun - and wool nylon blended fabrics varied in terms of surface hairiness were used. Temperature and relative humidity above fabrics were measured at the various distances from the fabric surface. Increase in the thickness of fabric, fabric weight, yarn count, and crimp resulted increase in thickness of still air layer above fabric. Surface hairiness of fabrics as well as the structural properties were found to be related with the thickness of still air layer above fabrics.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.89-97
• /
• 2006

This study investigated the effect of relative density on the thickness of shear zone. Digital image processing was used to measure the thickness of shear zone under plane strain conditions. A suitable epoxy resin was injected into the sample and the thickness of the shear zone was investigated. Four independent condition samples were prepared and the thickness of the shear zone was measured. The results indicated that the thickness of shear zone increases as the initial density of sample increases, and during the shear, the void ratios of the shear zone were changed, but the thickness of shear zone was not changed. In addition, the result of measurement of the thickness showed that the thickness of shear zone was almost fixed before critical state, but beyond critical state, the thickness of shear zone sharply increases as relative density increases.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.7
• /
• pp.994-1002
• /
• 2012

An experiment was carried out to determine the effect of age and caponization on the development blood and bone characteristics development in male country chickens in Taiwan. A total of two hundred 8-wk-old LRI native chicken cockerels, Taishi meat No.13 from LRI-COA, were used as experimental animals. Cockerels were surgically caponized at 8 wks of age. Twelve birds in each group were bled and dressed from 8 wks to 35 wks of age at 1 to 5 wk intervals. The results indicated that the plasma testosterone concentration was significantly (p<0.05) lower in capons after 12 wks of age (caponized treatment after 4 wks) than that of the intact males. The relative tibia weight, bone breaking strength, cortical thickness, bone ash, bone calcium, bone phosphorus and bone magnesium contents were significantly (p<0.05) higher in intact males, while capons had higher (p<0.05) plasma ionized calcium, inorganic phosphorus and alkaline phosphatase concentration. The plasma testosterone concentration, relative tibia weight, tibia length, breaking strength, cortical thickness, bone ash, calcium, and phosphorus contents of intact males chickens increased significantly (p<0.05) with the advance of age. In addition, the relative tibia weight of capons peaked at 18 wks of age, and declined at 35 wks of age. The bone ash, calcium and phosphorus content increased most after 14 wks of age in male native chickens in Taiwan. Also, tibia length and cortical thickness peaked at 22 wks of age. However, the peak of bone strength was found at 26 wks of age. These findings support the assertion that androgens can directly influence bone composition fluxes in male chickens. Caponization caused a significant increase in bone loss at 4 wks post treatment, which reflected bone cell damage, and demonstrated reductions in the relative tibia weight, breaking strength, cortical thickness, bone ash, calcium, phosphorus and magnesium contents, and increases in plasma ionized calcium, inorganic phosphorus and alkaline phosphatase concentration.