• Communications for Statistical Applications and Methods
• /
• 제14권1호
• /
• pp.81-92
• /
• 2007

This paper consider trinomial group testing concerned with classification of N given units into one of k disjoint categories. In this paper, we propose Bayesian inference for estimating individual category proportions using the trinomial group testing model proposed by Bar-Lev et al. (2005). We compared a relative efficience (RE) based on the mean squared error (MSE) of MLE and Bayes estimators with various prior information. The impact of different prior specifications on the estimates is also investigated using selected prior distribution. The impact of different priors on the Bayes estimates is modest when the sample size and group size we large.

• 품질경영학회지
• /
• 제33권4호
• /
• pp.117-122
• /
• 2005

Variable sampling rate(VSR) scheme varies the sampling rate for the current sample depending on the previous value of the control statistic. In this paper, we propose EWMA control charts with variable parameter(VP) scheme, which allows both the sample rate(the sample size or the sampling interval) and the weight to vary. We investigate the effectiveness of the VP scheme relative to the fixed parameter(FP) scheme and the VSR scheme in EWMA control charts. It is shown that using the VP scheme gives some improvements to the ability in detecting small and moderate shifts in the process normal mean.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.360-365
• /
• 1996

The purpose of this study was to evaluate the changes in the degree of conversion on a composite resin surface following heat treatment and mylar strip finishing. The effects of the time interval between the light-curing and heat-curing process were also evaluated. The composite resin surface which had been covered with a coverglass showed a lower conversion rate than the surface from which a layer of $500{\mu}m$ was ground away. The composite resin surface was definitely affected by oxygen during the heat curing process when it had not been insulated. When the composite resins were heat cured after 3 days of storage following the light curing process, the increased in the degree of conversion through heatcuring was limited.

• 한국농공학회지
• /
• 제26권3호
• /
• pp.90-98
• /
• 1984

In this paper, the anthor made a basic study of the storage function model and examined several constants in applying the storage function model to flood run-off analysis by dealing with the data in the Supyung and Hoyng Syung watershed, the applicabilities of the storage function model are examined by searching this optimum model parameters in two watersheds. The results are summarized as follows, 1) The optimum values of the exponential constants, P, in the storage function model showed to be 0.77 to 0.87 in two watersheds observed, therefore it was confirmed that the storage fumction model was approaching to the surface runoff model. 2) It was confirmed that the interval of variation of the storage constant, K, Showed to be larger than that of the exponential constant, p. 3) Relative erros in the discharge obtained by using the storage function model and the SDFP mothod showed to be 20 and 17 percent respectively to the observed discharge, therefore it was confirmed that the applicability of the storage function model using the SDFP method are excellent for runoff analysis. 4) A simple method is proposed for estimating the lag time in the storage function model.

• 대한전기학회논문지
• /
• 제38권12호
• /
• pp.971-982
• /
• 1989

An integrating position estimation algorithm has been developed for the navigation system of a free-ranging AGV system. The navigation system focused in this research work consists of redundant wheel encoders for the relative position measurement and a vision sensor for the absolute position measurement. A maximum likelihood method and an extended Kalman filter are implemented for enhancing the performance of the position estimator. The maximum likelihood estimator processes noisy, redundant wheel encoder measurements and yields efficient estimates for the AGV motion between each sampling interval. The extended Kalman filter fuses inharmonious positional data from the deadreckoner and the vision sensor and computes the optimal position estimate. The simulation results show that the proposed position estimator solves a generalized estimation problem for locating the vehicle accurately in space.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1472-1474
• /
• 2001

In this paper, a method was presented to estimate the contamination degree of outdoor insulator by the measurement of surface leakage current. Contamination is one of the most important factor to determine the performance of insulator. Thus, it is very important to exam the contamination degree on the outdoor insulator. There are many limits, such as reliability of data, interval of measurement and similarity of environmental conditions, in conventional method. So, the estimation technique for contamination has been needed to monitor the accurate pollution degree of insulator in situ. In this investigation, phase difference was measured to compare the variance of phase difference with the contamination degree and relative humidity. From the result, we could confirm the capability of the estimation method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.114-118
• /
• 2001

HP Laser Interferometer Measurement System[HP5529A] is one of the most powerful equipment for measurement of the motion accuracy. The straightness measurement system of the HP5529A is composed of wollastone prism and reflector. In this system, straightness error is measured by relative lateral motion between prism and reflector. But rotating motion of prism or reflector as moving optic causes not real straightness error but additive straightness error. Especially unwanted straightness error as this becomes very large when reflector is used as moving optic and an interval between reflector and prism is distant. In this paper, the compensation method is proposed for removing additive error and experiment is carried out for theoretical verification.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.27-30
• /
• 2002

In this paper, we were investigated leakage current properties of outdoor insulator on climatic environmental factor. Contamination is one of the most important factor to determine the performance of insulator. Thus, it is very important to exam the contamination degree on the outdoor insulator. There are many limits, such as reliability of data, interval of measurement and similarity of environmental conditions, in conventional method. So, we measured phase and leakage current of outdoor insulator using the temperature & humidity chamber. In this investigation, phase difference was measured to compare the variance of phase difference with the contamination degree and relative humidity.

• 자원ㆍ환경경제연구
• /
• 제11권1호
• /
• pp.99-119
• /
• 2002

As an alternative to classical maximum likelihood approach for analyzing dichotomous choice contingent valuation (DCCV) data, this paper develops a Bayesian approach. By using the idea of Gibbs sampling and data augmentation, the approach enables one to perform exact inference for DCCV models. A by-product from the approach is welfare measure, such as the mean willingness to pay, and its confidence interval, which can be used for policy analysis. The efficacy of the approach relative to the classical approach is discussed in the context of empirical DCCV studies. It is concluded that there appears to be considerable scope for the use of the Bayesian analysis in dealing with DCCV data.

• 산업경영시스템학회지
• /
• 제26권1호
• /
• pp.22-29
• /
• 2003

The study was to evaluate psychological and physiological changes of simulator sickness in the controlled condition of driving a car (1 hr. at speed of 60 km/h) in a graphic simulator. Simulator sickness was measured and analyzed every 5 min using both subjective responses(i.e., Simulator Sickness Questionnaire) and Physiological signals(EEG, HRV, Skin Temperature, GSR). The results showed that there was significant differences in subjective response 10 min after the main experiment. From 10 min after the driving, the level of subjective simulator sickness increased significantly, relative one of the rest condition. There also was significant differences in physiological responses between the rest and the 5 min after from the start of driving : for EEG, $\delta$ and $\theta$ at Fz area increased, while $\alpha$ decreased; the averaged R-R interval and skin temperature decreased; LF/HF and GSR increased. The results indicated that simulator sickness was induced by activation of the autonomic nerves and inactivation of the central nerves.