• Wind and Structures
• /
• 제24권5호
• /
• pp.501-528
• /
• 2017

In this work, wind tunnel tests of pressure measurements are carried out to assess the global aerodynamic interference factors, the local wind pressure interference factors, and the local lift spectra of an square high-rise building interfered by an identical cross-sections but lower height building arranged in various relative positions. The results show that, when the interfering building is located in an area of oblique upstream, the RMS of the along-wind, across-wind, and torsional aerodynamic forces on the test building increase significantly, and when it is located to a side, the mean across-wind and torsional aerodynamic forces increase; In addition, when the interfering building is located upstream or staggered upstream, the mean wind pressures on the sheltered windward side turn form positive to negative and with a maximum absolute value of up to 1.75 times, and the fluctuating wind pressures on the sheltered windward side and leading edge of the side increase significantly with decreasing spacing ratio (up to a maximum of 3.5 times). When it is located to a side, the mean and fluctuating wind pressures on the leading edge of inner side are significantly increased. The three-dimensional flow around a slightly-shorter disturbing building has a great effect on the average and fluctuating wind pressures on the windward or cross-wind faces. When the disturbing building is near to the test building, the vortex shedding peak in the lift spectra decreases and there are no obvious signs of periodicity, however, the energies of the high frequency components undergo an obvious increase.

• 한국광학회지
• /
• 제16권3호
• /
• pp.177-181
• /
• 2005

원통형 물체의 지름을 측정하는 방법에는 여러 가지가 있지만 본 연구에서는 두 가지 비접촉식 방법인 기하광학적 방법과 간섭${\cdot}$회절 방법으로 원통형 물체의 지름을 측정하였다. 기하광학적인 방법은 원통형 렌즈를 이용하여 기울인 레이저 광선을 원통형 물체의 옆면에 비추어 나타나는 곡선을 CCD 카메라로 포착하고 이 곡선을 기하학적인 방법으로 계산하는 것이며 간섭${\cdot} $회절에 의한 방법은 스크린에 나타난 물체에 의한 레이저광의 간섭${\cdot}$회절무늬를 측정하고 분석하는 방법이다. 버니어 캘리퍼스로 측정한 평균 지름이 $0.05\;mm\;\~\;100.50\;mm$ 인 원통형 물체를 기하광학적 방법과 간섭${\cdot}$회절 방법으로 측정한 결과 각각의 상대오차가 $2\%$ 와 $1\%$범위 이내였고 다량의 물체 지름을 신속히 측정하는데 응용될 수 있음을 확인하였다.

• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.99-105
• /
• 2012

This paper deals with the experimental results of the frequency-dependent resultant ground impedance of vertical ground electrodes installed with a regular n-polygon. In order to propose an effective method of installing the vertically-driven multiple ground electrodes used to obtain the low ground impedance, the resultant ground impedance of ground electrodes installed with a regular n-polygon were measured as functions of the number of ground electrodes and the frequency of test currents and the results were discussed based on the potential interferences among ground electrodes. As a consequence, the effect of potential interference on the resultant ground impedance of vertical ground electrodes is frequency-dependent and it is significant in the low frequency of a few hundreds [Hz]. The resultant ground impedance of multiple vertical ground electrodes is not decreased in linearly proportion to the number of ground electrodes due to the overlapped potential interferences. Also the distributed-parameter circuit model considering the potential interference, the frequency-dependent relative permittivity and resistivity of soil was proposed. The simulated results of the frequency-dependent resultant ground impedance of multiple vertical ground electrodes are in good agreement with the measured data.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1689-1692
• /
• 2013

Food is a common source of chromium (Cr) exposure. However, it is difficult to analyze Cr in complex food matrices by using inductively coupled plasma mass spectrometry (ICP-MS) because the major isotope, $^{52}Cr$, is masked by interference generated by the sample matrix and the plasma gas. Among the systems available to minimize interference, the recently developed collision-reaction interface (CRI) has a different structure relative to that of other systems (e.g., collision cell technology, octopole reaction system, and dynamic reaction cell) that were designed as a chamber between the skimmer cone and quadrupole. The CRI system introduces collision or reaction gas directly into the plasma region through a modified hole of skimmer cone. We evaluated the use of an CRI ICP-MS system to minimize polyatomic interference of $^{52}Cr$ and $^{53}Cr$ in various foodstuffs. The $^{52}Cr$ concentrations measured in the standard mode were 2-3 times higher than the certified values. This analytical method based on an ICP-MS system equipped with a CRI of helium gas was effective for Cr analysis in complex food matrices.

• 한국지능시스템학회논문지
• /
• 제14권6호
• /
• pp.674-677
• /
• 2004

본 논문에서는 심볼간의 간섭이 존재하는 채널에서 고정 지연 값을 가지는 트리검색 신호검출기의 효율적인 구성방법을 다룬다. 이 접근방법은 효율적인 다차원 신호공간 분할에 기반을 두고 있다 다차원 공간에서의 Voronoi 다이어그램 (VoD)과 Delaunay 분할 (DT)이 신호검출 알고리즘의 구현에 적용된다 제안된 방식에서는 VOD/DT에 포함되어 있는 기하학적인 정보를 활용하여 관찰된 순차적인 신호의 상대적인 위치가 결정되며 이러한 방식이 구현치 복잡도를 감소시키는 장점이 있음을 보인다. 구체적인 구성 절차가 심볼간의 간섭이 존재하는 통신채널에서의 예를 가지고 논의되며 시뮬레이션 결과가 논의된다.

• 한국전산유체공학회지
• /
• 제19권2호
• /
• pp.99-107
• /
• 2014

The aim of the present study is to investigate the flow interference between two adjacent undulating fish-like body, and its effect on the undulating propulsion. For this purpose, unsteady two dimensional incompressible flow calculations were conducted using an unstructured mesh flow solver, coupled with an overset mesh technique. To deal with mesh deformation due to fish locomotion, spring analogy is utilized. The fish body used in the simulation is constructed from the NACA0012 airfoil. The study indicates that the propulsion of undulating fish is proportional to frequency and wavelength of the midline oscillation when there is no adjacent fish. It also reveals that average thrust was increased when the vortex shedding from the tail was conserved well and pressure difference between upper and lower sides of the fish was magnified due to flow interference. From this study, which relative position and phase difference of locomotion between two fishes can generate maximum thrust was known among six different cases.

• 대한전자공학회논문지TC
• /
• 제41권9호
• /
• pp.39-45
• /
• 2004

순차적인 관찰값을 바탕으로 하고 신호검출에 소요되는 시간이 고정된 신호검출기의 제작에 관한 방법을 제안하며 이는 하드웨어의 복잡도를 감소시키는 장점이 있다. 제안된 방법은 Voronoi 다이어그램과 Delaunay 분할을 사용한다. 제안된 신호검출기 제작은 또한 고정 지연 트리 검색 검출 (FDTS) 방법에 기반을 둔다. FDTS 는 효율적인 순차적 신호검출 알고리즘이며 심볼간 간섭이 존재하는 채널에서 결정 궤환 등화기법 (DFE)과 결합하여 최적화에 근접한 성능을 보인다. 이러한 접근방법에서는 Voronoi 다이어그램 혹은 등가적으로 Delaunay 분할에 포함된 정보를 활용하여 다차원 유클리드 공간에서의 상대적인 관찰값의 위치를 계산하며 이러한 방법이 효율적인 계산을 유도하는 신호검출기의 제작에 이용된다.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.66-72
• /
• 2006

In this paper, an analytical investigation on the track separation mechanism for tracked excavator was studied. Relative motions of track links, sprocket, idler and support rollers are very important in the driving of an excavator The interference and friction between each components lead to noise and vibration. And also this has a great influence on the life for tracked excavator. RecurDyn program was used for the three dimensional modeling of the track assembly. Investigating the interference between sprocket and track links, the mechanism of the track separation was analyzed.

• 한국정보전자통신기술학회논문지
• /
• 제6권3호
• /
• pp.148-151
• /
• 2013

모델 오차 효과 및 민감도 분석을 사용하여 도래 방향 추정의 새로운 방법을 제시한다. 원하는 신호가 모델 오차 교정 효과를 통해 간섭을 제거한 후 얻어지게 되므로 추정에 있어서 채널 간섭 영향이 크게 줄어들게 된다. 모의실험을 통해 본 연구에서 제안된 방법이 기존의 방법에 비해 분해능과 정확성 추정이 향상되었음을 입증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.337-340
• /
• 2002

In data transmission at the digital satellite broadcasting systems, the delay and spread are caused whit receiving original signals from the transmitter in the receiver. So, there are some problems in data fast transmission. Also, transmitted signals ate received in stale of the combination of transmission delay and noise of channel. The affect of channel noise is reduced when increasing transmission power, but as signal interference due to the transmission delay and spread of channel increase in proportion to the transmission power, there is a problem in spite of increasing the transmission power. And there is the problem to add ISI(inter symbol interference) because the property of the channel is limo-varying due to relative moving in the transceiver Therefore, in this paper, a pulse shaping filter for the high-speed service in digital satellite broadcasting systems was designed and reduced the ISI.