• Journal of Environmental Impact Assessment
• /
• v.15 no.6
• /
• pp.385-394
• /
• 2006

Land resources should be managed not only for human utilizations but also for environmental preservation. Based on that, environmental capacity should be estimated in both environmental and developmental ways. This study was performed for developing an estimation model for relative environmental capacity, considering both Development Tolerance Index(DTI), which shows environmental and ecological conservation value and is based on national environmental assessment indicators of the Korea Ministry of Environment, and Development Attractiveness Index(DAI), which shows topographical characteristics and geographical accessibility. The relative environmental capacity in this study can be helpful to coping with the conflict in planning and managing the use of land resources. The relative environmental capacity in this study, however, did not include either environmental or ecological sensitivity of land resources. This limitation should be solved through further research.

• Journal of Preventive Medicine and Public Health
• /
• v.6 no.1
• /
• pp.87-99
• /
• 1973

The purpose of this project is offering fundamental and proper informations for the better health control and personnel management of the enlisted men of Marine corps in Korea. Survey has been done under 1,001 marine enlisted men for the purpose of understanding their condition of physique, vital capacity, and bodily strength. 1. Under the subject of physique, 7 items, body weight, chest-girth, relative body weight, relative chest-girth, Vervaeck index, and Roehrer index are listed, and under the subject of vital capacity, BTPS vital capacity and percent predicted vital capacity are listed, and under the subject of bodily strength, 7 items, grasping power, chinning-up, throwing a hanp-grenade, forward jumping, sitting-up, 100 meter sprinting, are listed. The total items are 16 and mean score of each one is as follow. 1)Physique : a. Height : $$168{\pm}0.15cm$$ b. Body weight : $$62.7{\pm}0.17kg$$ c. Chest-girth : $$91.4{\pm}0.16cm$$ d. Relative body weight : $$37.2{\pm}0.09$$ e. Relative chest-girth : $$54.3{\pm}0.10$$ f. Vervaeck index : $$91.6{\pm}0.15$$ g. Roehrer index : $$1.31{\pm}0.003$$ 2) Vital capacity : a. BTPS vital capacity : $$4470{\pm}20cc$$ b. % Predicted vital capacity : $$150{\pm}5.1%$$ 3) Bodily strength : a. Grasping power : $$41.4{\pm}0.26kg$$ b. Chinning-up : $$5.7{\pm}0.10$$ c. Throwing a hand-grenade : $$39.7{\pm}0.20m$$ d. Forward jumping : $$214{\pm}0.58cm$$ e. Sitting-up : $$19.1{\pm}0.25$$ f. Pushing-up : $$22.1{\pm}0.18$$ g. 100 meter sprinting : $$16.1{\pm}0.04sec$$. 2. Comparative analysis has been done about the conditional classes of marine enlisted men with the results of above mentioned 16 items. 7 classes according to the branches, 3 according to the ranks, 9 according to tile length of service are adopted respectively.

• Journal of Environmental Health Sciences
• /
• v.40 no.5
• /
• pp.355-366
• /
• 2014

Objectives: This study seeks to evaluate the vulnerability assessment of the human health sector for $PM_{10}$, which is reflected in the regional characteristics and related disease mortality rates for $PM_{10}$ in Busan over the period of 2006-2010. Methods: According to the vulnerability concept suggested by the Intergovernmental Panel on Climate Change (IPCC), vulnerability to $PM_{10}$ is comprised of the categories of exposure, sensitivity, and adaptive capacity. The indexes of the exposure and sensitivity categories indicate positive effects, while the adaptive capacity index indicates a negative effect on vulnerability to $PM_{10}$. Variables of each category were standardized by the rescaling method, and each regional relative vulnerability was computed through the vulnerability index calculation formula. Results: The regions with a high exposure index are Jung-Gu (transportation region) and Saha-Gu (industrial region). Major factors determining the exposure index are the $PM_{10}$ concentration, days of $PM_{10}{\geq}50$, ${\mu}g/m^3$, and $PM_{10}$ emissions. The regions that show a high sensitivity index are urban and rural regions; these commonly have a high mortality rate for related disease and vulnerable populations. The regions that have a high adaptive capacity index are Jung-Gu, Gangseo-Gu, and Busanjin-Gu, all of which have a high level of economic/welfare/health care factors. The high-vulnerability synthesis of the exposure, sensitivity, and adaptive capacity indexes show that Dong-Gu and Seo-Gu have a risk for $PM_{10}$ potential effects and a low adaptive capacity. Conclusions: This study presents the vulnerability index to $PM_{10}$ through a relative comparison using quantitative evaluation to draw regional priorities. Therefore, it provides basic data to reflect environmental health influences in favor of an adaptive policy limiting damage to human health caused by vulnerability to $PM_{10}$.

• Journal of Power System Engineering
• /
• v.20 no.5
• /
• pp.78-85
• /
• 2016

This paper considers the influence of internal heat exchangers to the efficiency of a refrigerating system using R170. These liquid-gas heat exchangers(internal or suction-line heat exchangers) can, in some cases, yield improved system performance while in other cases they degrade system performance. A steady state mathematical model is used to analysis the performance characteristics of refrigeration system with internal heat exchanger. The influence of operating conditions, such as the mass flowrate of R170, inner diameter tube and length of internal heat exchanger, to optimal dimensions of the heat exchanger is also analyzed in the paper. The main results were summarized as follows : the mass flowrate of R170, inner diameter tube and length of internal heat exchanger, and effectiveness have an effect on the cooling capacity, compressor work and RCI(Relative Capacity Index) of this system. Exception for the effect of inner diameter, the RCI of R170 with respect to refrigerant mass flowrate, the length and effectiveness of internal heat exchanger is about 2.1~3.3% higher than that of R13 at the same experimental conditions. With a thorough grasp of these effect, it is necessary to design the R170 compression refrigeration cycle using internal heat exchanger.

• Membrane Journal
• /
• v.14 no.1
• /
• pp.26-36
• /
• 2004

Ultrafiltration membranes based on anion charged poly(bis[4-(3-aminophenoxy)phenyl]sulfone pyromellite) imide derivatives (ACPI) were prepared by the phase inversion method. The polymers have good solubility in aprotic polar solvents. The composition of casting solution and the casting conditions played an important role in determining the permeation characteristics of membrane because the membrane structure could be controlled by the preparation conditions. The extent of fouling-repression was observed by the relative ratio of permeate flux ($J_t$)/pure water flux ($J_0$) and the membrane filtration index (MFI). The characteristics were measured by aqueous solution of bovine serum albumin (BSA) over a pH range of 2.5-9.0. The ACPI membrane having a hydrophilic property was less fouled than the membrane prepared from the original polyimide. With increasing the ion exchange capacity of ACPI membrane, th $\varepsilon$ relative ratio of flux was higher while the membrane filtration index was lower as compared with the original polyimide membrane. From the further away from isoelectric point of bovin serum albumin, the permeation was higher as well as the formation of fouling was more diminish. ACPI membranes having various their properties could be obtained. Further, it was proved that their permeation properties could be determined from the preparation conditions, various operating conditions, and dim $\varepsilon$ rent ion exchange capacity of anion charged polyimide derivatives.

• Journal of the Korean Society of Safety
• /
• v.17 no.2
• /
• pp.76-84
• /
• 2002

The seismic behaviors of steel moment connections with different structural characteristics are investigated. The rupture index, which represents the fracture potential, is adopted to study the effect of concrete slab and the relative strength between the coin the beam, and Panel zone on the ductility of connections. The results show that the presence of slab increases the beam strength, imposes constraint near the beam top flange, and consequently, induces concentrated deformation near the beam access hall, which reduces the ductility of the connection. The total deformation capacity of the connection depends not only on the beam but also on the column and panel zone. Therefore, the detrimental slab effects and the relative strength should be considered in the seismic design of the connection.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.7
• /
• pp.1073-1080
• /
• 2000

Moisture transfer property of fabrics has known as one of the most important factors deciding wearer's subjective comfort not only thermally but also of sensorial. As a decisive property of fabric materials in determining human sensorial comfort, moisture vapor management property of heat resistant workwear material was examined in terms of increasing and decreasing rate and maximum value of relative humidity in the microclimate under the sweat pulse situation. An unique moisture regulation index, B$_{d}$, was calculated from the measurements using a novel dynamic sweating hot plate apparatus and was used to assess the buffering capacity of fabrics against a moisture vapor sweat pulse.e.

• Journal of Environmental Health Sciences
• /
• v.39 no.6
• /
• pp.492-504
• /
• 2013

Objectives: This analysis seeks to evaluate the impact of environmental health factors (EHF; e.g. hospital beds per capita, employees of medical institutions) on extreme-heat vulnerability assessment in Busan Metropolitan City during 2006-2010. Methods: According to the vulnerability concept suggested by the Intergovernmental Panel on Climate Change (IPCC), extreme-heat vulnerability is comprised of the categories of Exposure, Sensitivity, and Adaptive Capacity (including EHF). The indexes of the Exposure and Sensitivity categories indicate positive effects, while the Adaptive capacity index indicates a negative effect on extreme-heat vulnerability. Variables of each category were standardized by the re-scaling method, and then each regional relative vulnerability was computed with the vulnerability index calculation formula. Results: The extreme-heat vulnerability index (EVI) excepting EHF was much higher in urban areas than in suburban areas within the metropolitan area. When EHF was considered, the difference in the EVI between the two areas was reduced due to the increase of the Adaptive capacity index in urban areas. The low EVI in suburban areas was induced by a dominant effect of natural environmental factors (e.g. green area) within the Adaptive capacity category. Conclusions: To reduce the vulnerability to extreme heat in urban areas, which were more frequently exposed to extreme heat than others areas, public health and natural environments need to be improved in sensitive areas.

• Structural Engineering and Mechanics
• /
• v.43 no.2
• /
• pp.225-237
• /
• 2012

This paper presents an experimental investigation of the flexural behavior of square hollow steel section (HSS) beams subjected to pure bending. Totally six unfilled and nine ultra high performance concrete (UHPC)-filled HSS beams were tested under four-point bending until failure. The effects of the steel tube thickness, the yield strength of the steel tube and the strength of concrete on moment capacity, curvature, and ductility of UHPC-filled HSS beams were examined. The performance indices named relative ductility index (RDI) and strength increasing factor (SIF) were investigated with regard to different height-to-thickness ratio of the specimens. The flexural strengths obtained from the tests were compared with the values predicted by Eurocode 4, AISC-LRFD and CIDECT design codes. The results showed that the increase in the moment capacity and the corresponding curvature is much greater for thinner HSS beams than thicker ones. Eurocode 4 and AISC-LRFD predict the ultimate moment capacity of the all UHPC-filled HSS beams conservatively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.1
• /
• pp.29-39
• /
• 2012

Currently, environment-friendly and sustainable fisheries are one of the major issues among fisheries authorities. A variety of alternative management policies and projects are going on to enhance fisheries management systems and fishery resources such as a TAC management program and a VDS (Vessel Day Scheme) management scheme for distant water fishing nations in Western and Central Pacific Fisheries Commission (WCPFC) convention area. These kinds of efforts among fisheries management authorities are aimed at limiting fishing capacity or fishing power. In terms of fisheries management, Fishing capacity and fishing power have increased the importance of the impact on a fishery and level of the resources. Increased fishing capacity and fishing power have caused not only depletion of fisheries resource, but also additional fishing cost. therefore, there is a clear need for authorities to manage fishing capacity and fishing power. It is also help ensure the conservation and sustainability of the fishery resources. Because of lack of data, absolute fishing power is difficulty to measure. The notion of relative fishing power is frequently used. In this study, relative fishing power was assessed using Mastuda (1991) method for fishing power index. The raw data for assessment was based on fishermen's logbook data from sampled fishing vessels in coastal snow crab gillnet fishery. Data Envelopment Analysis (DEA) method was used to assess fishing capacity. DEA is a linear programming methodology to measure the efficiency of a set of entities called Decision-Making Units (DMUs). It was recommended by FAO for assessing capacity in fisheries.