• 제목/요약/키워드: Relationship Strength

검색결과 2,257건 처리시간 0.029초

Exercise Using Isokinetic Strength Training Equipment and Physical Function Improvement

  • Hyon-Min Tae;Su-Yeong Eom;Byoung-Kwon Lee;Dae-Sung Park
    • Physical Therapy Rehabilitation Science
    • /
    • 제13권1호
    • /
    • pp.8-17
    • /
    • 2024
  • Objective: This study aims to explore the relationship between isokinetic strength training and the enhancement of physical function in older adults. It also evaluates the effectiveness of isokinetic strength training equipment. Method: This study randomly divided twenty healthy adults into two groups.The experimental group engaged in isokinetic strength training for 30 minutes, three times a week, over a four-week period. In contrast, the control group did not participate in any exercise regimen. We assessed several outcome measures including physical functions (sit-to-stand test, flexibility, Timed Up and Go test), grip strength, balance, thigh circumference, the Korean version of the Patient Health Questionnaire-9 (PHQ-9), and the Korean version of the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC). Additionally, the experimental group's self-perceived improvement in lower limb condition was evaluated using the Global Rating of Change (GROC) scale. Results: The experimental group showed significant improvements compared to the control group in various aspects: reduced sit-to-stand test duration (7.00±2.05 seconds), increased flexibility (4.69±3.90 cm), improved grip strength (1.54±1.74 kg), increased thigh circumference (left: 1.29±1.19 cm, right: 1.19±1.27 cm), enhanced Timed Up and Go test performance (-1.47±0.86 seconds), better balance (eyes open stance: -8.08±4.03 cm, eyes closed stance: -0.27±0.13 cm/s), and a decrease in depression severity (-0.15±1.51 points). Furthermore, significant increases were observed in the experimental group's maximal isokinetic strength at 90°/s for both flexion (19.62±7.03 Nm) and extension (19.60±14.65 Nm) over the study period. Conclusion: The findings suggest that isokinetic strength training equipment can significantly enhance physical functions in seniors when incorporated into an exercise regimen.

퇴적물 입자의 점하중강도지수와 마식율의 관계에 대한 연구 (A Study on Relationship between Point Load Strength Index and Abrasion Rate of Sediment Particle)

  • 김종연
    • 대한지리학회지
    • /
    • 제43권6호
    • /
    • pp.808-823
    • /
    • 2008
  • 하천 퇴적물질의 마식은 하상과의 충돌과 퇴적물질 입자간의 충돌에 의하여 발생한다. 하천 퇴적물질의 물리적 강도는 마식에 대한 저항의 정도를 나타내는 것으로 정의할 수 있으나, 이에 대한 실증적인 연구는 큰 진전을 보이지 못해왔다. 본 연구에서는 퇴적물질의 마식에 영향을 미치는 요소들(퇴적물질의 물리적강도, 퇴적물질의 크기, 퇴적물질의 양등)의 관계를 파악하기 위해서 마식기를 이용한 물리적 실험을 실시하였으며, 특히 퇴적물질의 물리적 강도가 마식율에 미치는 영향을 분석하는데 강조점을 두고 있다. 이 실험에서는 266개의 퇴적물을 이용했으며, 퇴적물질의 양과 퇴적물질의 평균 무게에 따라 11개의 소집단으로 나눠 실험하였다. 각 실험은 1시간 단위로 이루어 졌으며 퇴적물질은 최장 8시간 동안 마식되었다. 마식율은 각 실험단계마다 퇴적물질 입자 무게의 변동으로 측정하였으며, 총 2,128번의 측정이 이루어졌다. 퇴적물질의 물리적 강도는 시험이 종료한 뒤에 파괴하중을 측정하여 계산한 점 하중강도지수를 통해 측정하였다. 퇴적물질의 점하중강도지수는 마식율과 음의 상관이 있는 것으로 나타났으나, 두 변수들 간의 회귀식의 설명율($R^2$)은 0.22로 나타났다. 퇴적물질의 전반적인 마식은 실험 초기에는 빠르게 진행되지만, 풍화각이 제거된 뒤에는 마식율이 급감하는 경향을 보여주고 있다. 풍화각을 제거하는 초기 단계에는 퇴적물질의 물리적 강도와 마식율의 관계가 미약하지만 이후로 점점 설명율이 상승한다. 이 실험 결과에 의하면 퇴적물질의 물리적 강도는 마식율의 결정적인 설명변수가 아닐 수 있으며, 물리적 속성 이외에도 퇴적물질의 운반조건 등이 마식율에 큰 영향을 주는 것으로 판단된다.

한국 남해안의 잠재어업자원 조사연구 - 어업생물자원의 음향학적 조사 - (Investigations of the Potential Fisheries Resources in the Southern Waters of Korea - Hydroacoustic Investigations of Abundance and Distributing of Fish -)

  • 이대재;김진건;신형호
    • 수산해양기술연구
    • /
    • 제34권3호
    • /
    • pp.259-273
    • /
    • 1998
  • The hydroacoustic surveys to provide the essential information for the assessment, management and utilization of fishery resources in the southern waters of Korea were carried out during five research cruises between October 1996 and October 1997 by the training ship KAYA of Pukyong National University. These hydroacoustic investigations were designed to obtain more precise estimates of the geographic distribution, absolute abundance and biological characteristics of the fishery resources, and the vertically integrated densities of fish in terms of volume backscattering strength(SV) by survey region and depth bins, such as the entire water column and the 0~ 10 m from bottom fraction, were measured separately. Hydroacoustic data were collected by using a Simrad EK 500 Scientific echo sounder operating at two frequencies of 38kHz and 120kHz and the data stored in field were later processed on a HP PC using a Simrad EP 500 echo integration and target strength analysis system. The biological compositions of echo signal were identified and sampled using a demersal trawl during daylight hours. The mean target strength to scale the echo integration data for hydroacoustic surveys was derived from the relationship between the SV and the weight of trawl catch per unit volume of the water column sampled by demersal trawls. The results obtained can be summarized as follow : 1. The mean volume backscattering strength for the entire water column in the southern waters of Korea between 1996 and 1997 were -67.2 dB and -70.9 dB at two frequencies of 38 kHz and 120 kHz , respectively, and for the bottom layer of the 0-10 m from bottom friction were -68.8 dB, -70.2 dB, respectively. That is, the volume backscattering strength for the entire water column at low frequency was higher than that at high frequency. 2. The relationship between the mean backscattering strength (〈SV〉, dB) for the depth strata of trawl hauls and the weight (C, kg/m3) per cubic meter of the catch sampled by bottom trawling in the southern waters of Korea in January and July 1997 were expressed by the following equations: 38 kHz : 〈SV〉= -28.2 + 10 log(C), 120 kHz : 〈SV〉= -32.4 + 10 log(C). The mean weight -normalized target strengths derived from these equitions were -28.2 dB/ kg, -32.4 dB/ kg at 38 kHz and 120 kHz , respectively. That is, the mean weight -normalized target strength at 38 kHz was 4.2 dB higher than that at 120 kHz. 3. The distribution density of fish in terms of biomass per unit volume in the southern waters of Korea were estimated to be 125.9 $\times$ 10-6 kg/m3 and 141.3 $\times$ 10-6 kg/m3 at 38 kHz and 120 kHz , respectively.

  • PDF

심층혼합공법에서 순환자원을 활용한 지반안정재의 최적 단위결합재량 산정에 관한 연구 (A Study on the Estimation of Optimal Unit Content of Binder for the Soil Stabilizer Using the Recycled Resource in DMM)

  • 서세관;이강수;김유성;조대성
    • 한국지반신소재학회논문집
    • /
    • 제18권2호
    • /
    • pp.37-44
    • /
    • 2019
  • 심층혼합공법에 지반안정재를 사용하는 경우, 흙의 종류와 입도분포, 함수비 등의 조건에 따라 압축강도의 발현이 다르게 나타날 수 있어 지반의 안정성을 확보하기 위해 필요한 단위결합재량을 산정하기 위해서는 실내에서의 배합시험을 통해 설계기준강도의 만족 여부를 확인하여야 한다. 본 연구에서는 선행연구를 통해 순환유동층 보일러의 연소재를 고로슬래그의 알칼리 활성화 반응의 자극재로 활용하여 개발한 심층혼합공법용 지반안정재에 대해 다양한 단위결합재량을 적용하여 부산, 여수, 인천지역에서 채취한 점토와 혼합한 후 실내시험을 실시하여 압축강도의 발현효과를 고로슬래그 시멘트와 비교 평가하였다. 또한 국내에서 심층혼합공법에 개발된 지반안정재를 적용하는 경우, 실내에서의 배합시험을 수행하지 않고 단위결합재량을 산정할 수 있도록 실내시험 결과를 종합적으로 분석하였다. 분석결과, 물/결합재비(W/B)가 70%인 경우, ${\gamma}_B=(108.93+0.0284q_u){\pm}35$, 물/결합재비(W/B)가 80%인 경우, ${\gamma}_B=(122.93+0.0270q_u){\pm}40$의 관계가 있는 것으로 도출되었다.

고강도 소재의 인장과 저주기피로 물성치의 연관성에 관한 연구 (A Study on the Relationship between Tensile and Low Cycle Fatigue Properties of High Strength Material)

  • 박명규;서창희
    • 소성∙가공
    • /
    • 제23권2호
    • /
    • pp.110-115
    • /
    • 2014
  • Low cycle fatigue characteristics are very important in the development of automobile suspension parts. Fatigue properties using the strain life approach are usually obtained from low cycle fatigue tests. However, low cycle fatigue testing requires a lot of time and cost. In the current study, an attempt to estimate low cycle fatigue properties of high strength steel sheet from tensile test and tensile simulations is performed. In addition, low cycle fatigue testing was conducted to compare the fatigue properties obtained from tensile testing and simulations. In conclusion, the results effectively predict the low cycle fatigue properties. However, some deviations still exist.

뒤틀림변형을 받는 관형단면의 극한강도 및 거동에 관한 연구 (A Study on the Ultimate Strength and Behavior of Circular Section Subjected to Cross-Sectional Distortion)

  • 김우범
    • 대한토목학회논문집
    • /
    • 제14권1호
    • /
    • pp.83-91
    • /
    • 1994
  • 뒤틀림을 받는 손상 관형 단면의 강도 및 거동을 파악하기 위한 효율적인 해석기법을 제시하였다. 단면의 뒤틀림을 고려키 위하여 유한요소 해석법을 이용하였으며 부재의 유한요소 해석시 발생하는 국부 불안정에 의한 하중-변형 응답의 발산 문제를 해결하기 위하여 손상부위만에 대하여 유한요소해석을 수행, 모멘트-곡률 관계를 일반화하여 이를 부재해석의 입력자료로 제공하였다. 광범위한 실용판형 부재를 포함하는 데이타베이스를 구축하여 이에 대한 복회귀분석을 수행, 일반화된 모멘트-곡률관계식을 제시하여 연구의 실용성을 제고 하였다.

  • PDF

과제의 부담과 종류에 따른 아동의 친사회적 도덕추론과 친사회적 행동 (Children's Prosocial Moral Reasoning and Prosocial Behavior)

  • 이옥경;이순형
    • 아동학회지
    • /
    • 제17권1호
    • /
    • pp.275-288
    • /
    • 1996
  • The purposes of this study were to investigate children's prosocial behavior by age and sex and to examine the relationship between children's prosocial moral reasoning and prosocial behavior by costs and types of tasks. The subjects were 300 3th-and 6th-graders enrolled in elementary schools in Seoul. The revised form of Prosocial Moral Dilemmas including costs and types of tasks was used. The tasks of prosocial behaviors included time-cost tasks, money-cost tasks and physical strength-cost tasks. For data analysis, the paired t-test, two-way ANOVA, and Pearson's Correlations were used. Major findings were as follows; (1)There was age difference in children's prosocial behavior. 6th-graders performed at a higher level than 3th-graders. Sex differences weren't significant. In low- and high-cost tasks and in time-, money-, and physical strength-cost tasks, there were (2) Scores on high-cost behavior tasks were higher than on low-cost tasks. (3) Children's prosocial moral reasoning was positively related to prosocial behavior; in low- and high-cost tasks, and in time-, money-, and physical strength-cost tasks.

  • PDF

캘린더링이 TiO$_2$ 고 충전지의 특성에 미치는 영향 (Calendering Effects on the Properties of TiO$_2$ Highly Leaded Paper)

  • 오세중;서영범
    • 펄프종이기술
    • /
    • 제30권4호
    • /
    • pp.69-78
    • /
    • 1998
  • Papers loaded with 10-40% $TiO_2$ by dry weight were calendered under the various combinations of calendering conditions such as calender type, linear pressure, and roll temperature. After being calendered, light scattering coefficient, surface roughness, density, and tensile strength of the papers were measured and the results were summerized as follows: 1. To increase the light scattering coefficient of $TiO_2$-highly-loaded paper further by calendering, the calender roll pressure and temperature should be kept low. Under these conditions, the physical strength of the paper was not significantly affected. 2. At low roll temperature, soft nip calender and machine calender type showed the same relationship between paper density and its roughness. At high roll temperature, soft nip calender type gave much lower roughness than machine calender type at the same density. 3. At high roll temperature of both calenders, the density as well as the tensile strength of the TiO$_2$-loaded paper was increased significantly.

  • PDF

평행평판 간극에서 전기장의 강도변화에 따른 분산계 ER유체의 유량-압력강하 특성 (Flow Rate-Pressure Drop Characteristics of Dispersive ER Fluid According to Change of Electric Field Strength in Clearance between Parallel Plates)

  • 장성철;염만오;김도태
    • 한국공작기계학회논문집
    • /
    • 제12권1호
    • /
    • pp.78-83
    • /
    • 2003
  • Electro-rheological(ER) fluids are suspensions in which rheological properties show an abrupt change with variation of electric fields. We modeled the parallel-plates relating to ER-Valve system and yielded shear stress according to the strength of electric field. The purpose of the present study is to examine the flow characteristics of ER fluids according to the strength of electric field between parallel-plates. Then the steady relationship between pressure drop and flow rate of the ER fluids between parallel-plates under application of an electric fields was measured. The pressure drop and flow rates of ER fluids under the application of electric fields for steady flow were measured. For the experiment, we used the ER fluids, 35w% zeolite having hydrous particles and differential pressure gauge. This test reviewed experiment for the special changes of ER fluids in the steady flow condition.

철도차량 구조재료의 부식 및 피로 특성 연구 (A Study on the Corrosion and Fatigue of Structural Materials for Rolling Stock)

  • 장세기;김용기;구병춘
    • 한국철도학회논문집
    • /
    • 제8권4호
    • /
    • pp.299-307
    • /
    • 2005
  • In general, structural integrity of rolling stock structures should last more than 25 years. During the lifetime corrosive degradation occurs. For structural design and diagnosis, quantitative relationship between corrosive degradation and variation of mechanical properties such as tensile strength and fatigue strength is needed. In this study, first of all we established the atmospheric corrosion test procedure. At regular intervals using specimens of SM490A and SS400 on the atmospheric corrosion test bed, we carried out tensile and fatigue tests. The fatigue strength decreases as the atmospheric corrosion period increases. In addition we studied the effect of post-weld heat treatment on the tensile and fatigue behaviour and performed electrochemical corrosion tests.