• Journal of the Korea Furniture Society
• /
• v.10 no.2
• /
• pp.73-78
• /
• 1999

This paper describes the relationship between the bending strength properties of sloped finger-jointed woods and the acoustic emissions(AEs) generated during the test. Rhus verniciflua pieces were cut in sloped-finger types and glued with three kinds of adhesives(polyvinyl acetate, polyvinyl-acryl acetate and oilic urethane resin). The slope ratios of finger joints were 0, 1.0, 1.5, and 2.0. The AE cumulative event count and cumulative count were measured during the bending test. The results were as follows: The lower the bending strength(load) was, the generation time of AE event count got and the higher the increasing rate of AE event count became in the sloped finger-jointed specimens bonded with polyvinyl acetate, polyvinyl-acryl acetate oilic urethane resin adhesives. Therefore, the slope from load-AE cumulative event count was very steep. The patterns of AE event count and count were very similar. The relationship between the MOR and the AE parameter from load and AE cumulatve event count in the early stage of the sloped finger-jointed specimens bonded with polyvinyl acetate, polyvinyl-acryl and oilic urethane resin adhesives was much greater than that between the MOE and the MOR. Therefore, the AE signals obtained during bending test are useful for estimating the strength of sloped finger-jointed Rhus verniciflua specimens.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.3
• /
• pp.297-308
• /
• 2011

The purpose of this study was to investigate the relationship among isometric and isokinetic muscle strength, lean body mass(LBM) and bone mineral density(BMD) in the elderly. Eleven males(age, 70.27${\pm}$5.78yr; height, 167.36${\pm}$6.68 cm; weight, 68.34${\pm}$8.23 kg) and thirteen female(age, 69.77${\pm}$4.13yr; height, 152.80${\pm}$4.45 cm; weight, 56.86${\pm}$7.40 kg) participated in this study. In all subjects, LBM and BMD segments was measured by using Dual-energy x-ray absorptiometry(DEXA, Lunar DPS-DM, U.S.A.). Maximum isometric and isokinetic muscle strength of flexion and extension at the knee and elbow, ankle, trunk joints were measured by using an isokinetic dynamometer(CON-TREX(R) Multi Joint Testing Module, Switzerland). The results of this study showed that isometric and isokinetic muscle strength was significantly higher in extension than flexion. In the male and female, hamstring to quadriceps strength ratio(H:Q ratio) was increased as contraction velocity increased. BMD was correlated significantly with trunk extension in the male, but not in the female. LBM was correlated significantly in the male and female with knee extension strength. This study suggests that in the elderly muscle strength training program should put more weight on extensor muscles of the body.

• Advances in Computational Design
• /
• v.2 no.3
• /
• pp.225-240
• /
• 2017

This paper presents the application of multiple linear regression (MLR) and artificial neural network (ANN) techniques for developing the models to predict the unconfined compressive strength (UCS) and Brazilian tensile strength (BTS) of the fiber reinforced cement stabilized fly ash mixes. UCS and BTS is a highly nonlinear function of its constituents, thereby, making its modeling and prediction a difficult task. To establish relationship between the independent and dependent variables, a computational technique like ANN is employed which provides an efficient and easy approach to model the complex and nonlinear relationship. The data generated in the laboratory through systematic experimental programme for evaluating UCS and BTS of fiber reinforced cement fly ash mixes with respect to 7, 14 and 28 days' curing is used for development of the MLR and ANN model. The data used in the models is arranged in the format of four input parameters that cover the contents of cement and fibers along with maximum dry density (MDD) and optimum moisture contents (OMC), respectively and one dependent variable as unconfined compressive as well as Brazilian tensile strength. ANN models are trained and tested for various combinations of input and output data sets. Performance of networks is checked with the statistical error criteria of correlation coefficient (R), mean square error (MSE) and mean absolute error (MAE). It is observed that the ANN model predicts both, the unconfined compressive and Brazilian tensile, strength quite well in the form of R, RMSE and MAE. This study shows that as an alternative to classical modeling techniques, ANN approach can be used accurately for predicting the unconfined compressive strength and Brazilian tensile strength of fiber reinforced cement stabilized fly ash mixes.

• Physical Therapy Korea
• /
• v.18 no.4
• /
• pp.34-42
• /
• 2011

The lumbrical muscles contribute to the intrinsic plus position, that is simultaneous metacarpophalangeal (MCP) flexion and interphalangeal (IP) extension. The strength of the lumbrical muscles is necessary for normal hand function. However, there is no objective and efficient method of strength measurement for the lumbrical muscles. In addition, previous studies have not investigated the measurement of the cross-sectional area (CSA) of the lumbrical muscles using ultrasonography (US) and the relationship between lumbrical muscle strength in the intrinsic plus position and the CSA. Therefore, the purpose of this study was to identify the measurement method of the CSA of the lumbrical muscles using US and to examine the relationship between maximal isometric strength and the CSA of lumbrical muscles. Nine healthy males participated in this study. Maximal isometric strength of the second, third, and fourth lumbrical muscles was assessed using a tensiometer in the intrinsic plus position which isolated MCP flexion and IP extension. The CSA of the lumbrical muscles was measured with an US. The US probe was applied on the palmar aspect of the metacarpal head with a transverse view of the hand in resting position. There was no significant difference between maximal isometric strength of the lumbrical muscles, but the fourth lumbrical muscle was stronger than the others. The CSA of the lumbrical muscles was significantly different and the fourth lumbrical muscle was significantly larger than the second lumbrical muscle. There was moderate to good correlation between maximal isometric strength and the CSA of the lumbrical muscles. Therefore, we conclude that maximal isometric strength of the lumbrical muscles was positively correlated to the CSA of the lumbrical muscle in each finger, while the measurement of the CSA of the lumbrical muscles, using US protocol in this study, was useful for measuring the CSA of the lumbrical muscles.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.443-448
• /
• 2001

This paper presents a bond characteristics of high strength steel reinforced concrete members. High strength steel is what yield strength is higher than that of normal strength steel. So, the amount of flexural steel needed in R.C. members can be decreased. In result, it is expected that the workability and structure quality can improve and man power can minimize. For this purpose, specimens were made and tested with experimental parameters, such as concrete strength, steel diameter and yield strength. The result showed that under same tensile force of steel, in case of substituting normal strength steel with high strength steel, maximum bond stress increased and development length didn't almost change. In addition, the governing equation of bond and bond stress verse slip relationship were derived and compared with test values such as maximum bond stress, slip and bond stiffness.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.4
• /
• pp.135-142
• /
• 2007

Icon conveys symbolic information which they have become ubiquitous as main element of GUI. However, users often cannot intuitively understand its functional meanings. Icon has to be designed for users to easily understand functional meanings. In order to evaluate icon, the spreading activation model can be used to effectively understand the process of information retrieval. In asymmetric spreading activation model is that in the two nodes the degree of spreading activation is different according to direction. Thus, asymmetric spreading activation theory was performed evaluating the strength of association when users see visual image to associate their verbal meaning (visual image - verbal meaning pair) and users see verbal meaning to associate their visual image (verbal meaning - visual image pair). According to the direction, this study hypothesizes that the well-designed icons have symmetric relationship rather than asymmetric relationship between the two pairs. The strength of association is measured through the reaction time and the accuracy rate. In performing SAT (spreading activation test), the ten icons were selected as word processing software icons. After first SAT, newly designed icons were developed based on Korean mental model, and second SAT was conducted using them. The results showed that the accuracy rate of newly designed icon has been improved. Also there is significant difference of reaction time between current icons and newly designed icons. Well-designed icon is confirmed that the strength of association relationship arises symmetrically rather than asymmetrically between the two pairs. User centered icons could be designed by improving the strength of association between the two pairs. Asymmetric SAT evaluates the strength of the association between the visual image and the verbal meanings to contribute to the development of icon which it related to human's association structure.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.45-51
• /
• 2012

The shear strength of weathered granite soils under unsaturated condition was evaluated by $K_0$ consolidated triaxial tests. Various matric suctions in the unsaturated triaxial tests were applied using suction-controlled triaxial test apparatus for weathered granite soils obtained in Daegu. Soil water characteristic curve (SWCC) laboratory tests for drying and wetting procedure were performed and van Genuchten curves were fitted by experimental results. The contribution of matric suction in unsaturated soils is directly correlated to effective stress and evaluated from SWCCs. The effective stresses were estimated from these SWCCs and the relationship between effective stress and unsaturated shear strength was determined. In the effective stress description, the unsaturated shear strength with respect to various suctions indicates unique relationship and almost the same as that of the saturated envelope.

• Journal of Digital Convergence
• /
• v.17 no.3
• /
• pp.361-369
• /
• 2019

The purpose of this study was to investigate the adaptation factor to North Korean refugees by identifying the relationship between character strengths affecting adaptation process and psychological well-being(PWB) in South Korea. The study examined the relationship between PWB and character strength of 117 participants and identified the sub-factors of character strength that affect the settlement period in South Korea. The data were analyzed by using the Model 1 of Process Macro and SPSS 22. The results of this study showed a correlation between PWB and sub-factors of character strength such as wisdom, humanity, courage, justice, temperance, and spirituality. The main effect was to investigate the relationship between PWB and sub-factors of character strength by independent variables. The level of PWB increased with the level of sub-factors of character strength. The moderate effect was showed in the courage of the settling period in relation to PWB. Finally, Limitations and implications of this study was discussed.

• The Korean Journal of Pharmacology
• /
• v.19 no.2
• /
• pp.9-16
• /
• 1983

The effect of higenamine upon the interval-strength relationship was kinetically analyzed, and compared them with epinephrine and calcium ion. The followings are result obtained : 1) Polyphasic patterns were seen by all agents applied on the interval-force curve of rabbit atrial muscle. 2) Higenamine, unlike calcium ion, increased the amount of PIEA produced per beat dose-dependently and scarcely affected the disappearance of NIEA. 3) Higenamine appeared to similar pattern with epinephrine in augmenting the PIEA, not affecting the NIEA. 4) Calcium ion slightly influenced the PIEA, rather hastened the disappearance of NIEA. From these result the positive inotropic action of higenamine was attributed solely to increment of PIEA.

• Geomechanics and Engineering
• /
• v.11 no.1
• /
• pp.161-175
• /
• 2016

A series of experimental studies are conducted on the deformation and shear strength property of compacted loess. The results reveal that the relationships of both the initial moisture content (w) and the initial degree of compaction (K) of compacted loess with cohesion (w) and the angle of internal friction (${\varphi}$) are linear. The relationship between the secant modulus ($E_{soi}$) and K is also linear. The relationship between $E_{soi}$ and w can be fitted well by a second-order polynomial. Further, when the influences of w and K are ignored, the relationship between the confined compression strain (${\varepsilon}$) and vertical pressure (p) can be expressed by a formula. A correction formula for the deformation of compacted loess caused by a change in w and K is derived on the basis of the study results.