• Title/Summary/Keyword: Relationship Length

Search Result 2,049, Processing Time 0.026 seconds

산마늘의 자생지별 외부형태 및 수리분류학적 연구 (External Morphology and Numerical Taxonomy among Habitat of Allium victorialis var. platyphyllum)

  • 유기억
    • 한국자원식물학회지
    • /
    • 제11권2호
    • /
    • pp.210-216
    • /
    • 1998
  • Taxonomic studies in external morphology, principal component analysis and cluster analysis were conducted to understand the intraspecific relationship among three habitats (Jirisan, Odaesan and Ulleungdo) of allium voctorialis var. platyphyllum. External morphology such as bulb color, leaf blade length and width, petiole length, total leaf length, peduncle length, perianth lobe length and width, length of anther and filament were useful characters for identification of poplations in three habitats. The results obtained based on the principal component (Pc) analysis of treated 72 OTUs(included outgroup) were divided into three groups by the PC 1 ,2,3 and the sums of contributions for the total variance were 84.1%(PC1 51.0%, PC2 24.9% and PC3 8.2%, respectively). In cluster analysis by the UPGMA and Ward's methods , there was similarities in the compostion of clustered taxa, and only Ulleungdo population was distinctly identified from population of other two habitats.

  • PDF

남빙양 새우의 생태학적 특성 (Some Ecological Aspects of Antarctic Krill, Euphausia superba in the Antarctic Ocean)

  • 이장욱;권정노;김태익;양원석
    • 한국수산과학회지
    • /
    • 제27권2호
    • /
    • pp.183-192
    • /
    • 1994
  • 대서양 남빙양 새우의 주된 분포역은 South George Island, Laurie/Coronation Islands와 Livingston/King George Islands 지역으로 공간적인 구분을 뚜렷이 하였다. 어획 수심은 층에서 150 m층까지 달했고, 10 m층으로 구분한 단위노력당어획량의 수직 분포는 층간에 큰 차이가 없었으나 수심이 깊어 질수록 낮아지는 경향을 보였다. 수온과 단위노력당 어획량의 관계로 부터 남빙양 새우는 주로 $0.8{\sim}l.0^{\circ}C$ 범위에서 높은 밀도를 나타내었다. 남빙양 새우의 암수별 체장 조성은 큰 차이를 보여 숫컷의 비율은 작은 체장에서, 암컷의 비율은 큰 체장에서 각각 높았다. 두흉갑장과 체장관계, 체장과 체중관계가 암수별로 추정되었다. 암수별 성비조성은 숫컷이 $60.3\%$, 암컷이 $39.7\%$로서 유의한 차이를 나타내었다.

  • PDF

민들조개 Gomphina melanaegis 방류지역의 민들조개 개체군 분포 분석 (Analysis of Population Distribution on Stocking Area of Sandy Beach Clam, Gomphina melanaegis)

  • 이주;이채성;김수경;김완기;조규태
    • 한국환경과학회지
    • /
    • 제18권10호
    • /
    • pp.1163-1170
    • /
    • 2009
  • The clam, Gomphina melanaegis, which is commonly called the sandy beach clam because of its habitat, is a valuable organism in the sandy coast of East Sea, Korea. It is frequently observed in large populations between 0.5 and 5 meters. We have released 50,000 seedling, ranging from the diameter of approximately 3 mm, 2007, and 1,000,000 seedling, ranging from the diameter of approximately 0.2 mm, plus 100,000 adult individuals, ranging from the shell length of approximately 20~40 mm, 2008 at Jinha beach. The spawning period of G. melanaegis, was from June to August, and the main spawning occurred in July. This investigation was carried out to elucidate population distribution on the stocking area of sandy beach clam, G. melanaegis. The relationship between shell length and ring radius in each ring was investigated as a regression line. The relationship between the shell length and shell height of released young clam was SH=1.0105SL-4.7764 ($R^2=0.7905$). The relationship between the shell length and total weight of released young clam was $TW=0.0013SL^{2.3966}$($R^2=0.71$). It draws a deduction that the ring of this clam was produced once a year during the duration between June and August.

달리기 시 발의 인체측정학적 변인과 운동역학적 변인의 관계 (The Relationship between Anthropometric Parameters of the Foot and Kinetic Variables during Running)

  • Lee, Young Seong;Ryu, Jiseon
    • 한국운동역학회지
    • /
    • 제29권3호
    • /
    • pp.173-183
    • /
    • 2019
  • Objective: The aim of this study was to investigate the correlation coefficients between anthropometric parameters of the foot and kinetic variables during running. Method: This study was conducted on 21 healthy young adults (age: $24.8{\pm}2.1yes$, height: $177.2{\pm}5.8cm$, body mass: $73.3{\pm}7.3kg$, foot length: $256.5{\pm}12.3mm$) with normal foot type and heel strike running. To measure the anthropometric parameters, radiographs were taken on the frontal and sagittal planes, and determined the length and width of each segment and the navicular height. Barefoot running was performed at a preferred velocity ($3.0{\pm}0.2m/s$) and a fixed velocity (4.0 m/s) on treadmill (Bertec, USA) in order to measure the kinetic variables. The vertical impact peak force, the vertical active peak force, the braking peak force, the propulsion peak force, the vertical force at mid-stance (vertical ground reaction when the foot is fully landed in mid-stance or at the point where the weight was uniformly distributed on the foot) and the impact loading rate were calculated. Pearson's correlation coefficient was used to investigate the relationship between anthropometric variables and kinetical variables. The significance level was set to ${\alpha}=.05$. Results: At the preferred velocity running, the runner with longer forefoot had lower active force (r=-.448, p=.041) than the runner with short forefoot. At the fixed velocity, as the navicular height increases, the vertical force at full landing moment increases (r= .671, p= .001) and as the rearfoot length increases, the impact loading rate decreases (r=- .469, p= .032). Conclusion: There was a statistically significant difference in the length of fore-foot and rearfoot, and navicular height. Therefore it was conclude that anthropometric properties need to be considered in the foot study. It was expected that the relationship between anthropometric parameters and kinetical variables of foot during running can be used as scientific criteria and data in various fields including performance, injury and equipment development.

J-적분과 균열선단개구변위에 관한 구속계수 m의 평가 (An Estimation of Constraint Factor on the ${\delta}_t$ Relationship)

  • 장석기
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제24권6호
    • /
    • pp.24-33
    • /
    • 2000
  • This paper investigates the relationship between J-integral and crack tip opening displacement, ${\delta}_t$ using Gordens results of numerical analysis. Estimation were carried out for several strength levels such as ultimate, flow, yield, ultimate-flow, flow-yield stress to determine the influence of strain hardening and the ratio of crack length to width on the $J-{\delta}_t$ relationship. It was found that for SE(B) specimens, the $J-{\delta}_t$ relationship can be applied to relate J to ${\delta}_t$ as follows $J=m_j{\times}{\sigma}_i{\times}{\delta}_t$ where $m_j=1.27773+0.8307({\alpha}/W)$, ${\sigma}_i:{\sigma}_U$, ${\sigma}_{U-F}={\frac{1}{2}} ({\sigma}_U+{\sigma}_F$), ${\sigma}_F$, ${\sigma}_F}$ $Y=({\sigma}_F+{\sigma}_Y)$, ${\sigma}_Y$

  • PDF

들깨 수량에 관여하는 주요 형질간의 상관관계와 그들 형질이 수량에 미치는 영향 (Relationship Between The Yield Components and Their Influence on the Yield of Perilla)

  • 유익상;최병한;오성근
    • 한국작물학회지
    • /
    • 제11권
    • /
    • pp.99-103
    • /
    • 1972
  • 들깨 수량에 영향하는 형질을 정확히 알기 위하여 형질상호간의 상관관계와 경로계수를 분석한 바 그 결과를 요약하면 다음과 같다. 1. 경장은 경식경, 화방수, 경중과 유효분지수는 화방수와 높은 정의 상관을 그리고 유효분지수는 1,000입중과 화방수는 1,000입중과 각각 높은 부의 상관을 보였다. 2. 수량에 직접적으로 영향하는 형질은 경중, 화방수 1,000입중 유효분지수, 경직경등이다. 3. 간접적 효과는 경장대 경중, 유효분지수 대 화방수, 화방수 대 경중간에 높은 값을 보였다. 4. 들깨의 수량은 경장이 길고 유효분지수 및 화방수가 많으며 1,000입중과 경중이 무거운것일수록 수량이 많다는 사실을 알수 있다.

  • PDF

제주도산 소라의 산지별 특성 (MORPHOLOGICAL CHARACTERISTICS OF THE TOPSHELL IN THE JEJU COASTAL WATERS)

  • 이정열;이정재
    • 한국수산과학회지
    • /
    • 제13권4호
    • /
    • pp.213-219
    • /
    • 1980
  • 1978년 4월부터 1979년 10월까지 제주도의 제주시, 성산포, 모슬포, 서귀포연안에서 채집한 소라를 대상으로 성장 및 바만상태를 형태측정학적으로 산지별 비교 고찰하였다. 1. 각장크기는 모슬포산이 가장 컸고 제주시산이 가장 작았다. 2. 패각상의 제1열 극수는 제주시산이 가장 적었고 모슬포산이 비교적 많은편이었다. 3. 암수간의 성비는 4개지역 모두 1:1로 나타났다. 4. 각장에 대한 각폭의 상대성장관계는 회귀직선으로 표시되는데, 성산포산의 경과값이 가장 작았고 모슬포, 제주시, 서귀포산 순으로 커졌다. 5. 각장에 대한 전중량의 상대성장관계는 지수식으로 표시되며 서귀포, 성산포, 제주시 및 모슬포산순으로 상대성장계수값이 커졌다. 6. 전중량에 대한 육중량의 관계는 회귀직선으로 표시되며 경과값이 가장 작은 것을 제주시산이었고 가장 큰 값은 모슬포산이었다. 7. 소라의 비만상태가 가장 좋은 것을 모슬포산이었고 제주시산이 가장 나빴다. 8. 4개지역에 대한 소라의 성장관계를 유의성검정한 결과 전중량에 대한 육중량의 관계에서 제주시산과 다른 3개지역간에 유의의 차가 있었다.

  • PDF

3차원 인체모델을 이용한 엉덩이의 형태적 특징과 패턴과의 관계 (Relationship between Hip Shape and Pattern Using 3D Body Model)

  • 조영숙
    • 한국의류학회지
    • /
    • 제33권2호
    • /
    • pp.266-275
    • /
    • 2009
  • Variations of individual hip shapes are a major obstacle in pattern making for fitness. The drafting method is used for pattern making in today's apparel industry. Whilst catering to a limited number of information such as waist and hip sizes, this method does not cater to variations in hip shape. This paper describes the analysis of hip shapes using 3D body model and tries to make sure the relationship between hip shape and pattern by calculating hip angle and dart amount. We achieved results in analyzing various hip shapes by extracting hip angle. Moreover, various hip shapes can be divided into three types(A, B and C) by the hip angle value($K_{sh}-K_{wsh}$). When we use computerized draping method to make a personalized pattern for a tigth skirt, we easily create complex dart lines automatically. Therefore we achieve the result of individual dart amount such as distance between dart lines and dart areas. C type of hip shape had short dart length, long distance between dart lines and a large amount of dart area. On the other hand, A type had long dart length, short distance between dart lines and small amount of dart area. B type had long length and long distance between dart lines and large amount of dart area. In traditional pattern making, distance between dart lines is usually proportional to amount of dart area because of similarity in dart line shape. In our pattern, there is no proportional relationship between dart line distance and dart area. This means that variations in hip shapes result in a wide variety of dart line curvature resulting in a wide range of dart area. By ensuring an accurate relationship between hip shape and pattern, it is possible to make patterns which result in clothing that not only fits well, but also exhibits other desirable properties.

기능성 족지장단분석과 X-ray의 골반변위 진단의 비교 연구 - X-ray 촬영 자세 및 평가 기준에 따라 - (The Comparative Study between Leg Length Analysis and X-ray on Diagnosis of Pelvic Malpositions - according to Positions and Valuation Bases -)

  • 이정민;국길호;최보미;정현아;홍서영
    • 척추신경추나의학회지
    • /
    • 제5권2호
    • /
    • pp.169-180
    • /
    • 2010
  • Objectives: This study was carried out to investigate the relationship of leg length analysis and X-ray finding according to positions and valuation bases on diagnosis of pelvic malpositions. Methods: Twenty-two people who get $33.09{\pm}10.73$ as average were evaluated by leg length analysis and X-ray findings. After measuring innominate measurement(IM), femur head line. distance between S2 and posterior superior iliac spine(PSIS). ilium shadow measurement(ISM), major axis of obturator foramen(MaF), minor axis of obturator foramen(MiF) and distance between off centering measurement and symphysis pubis, those were analyzed. Results: 1. In assessment of posterior rotation malposition ilium(PI), it was showed the best coincidence between leg length analysis and X-ray analyzed by 1M in supine position(11 cases, 50.5%). 2. In assessment of inflare, coincidence index between leg length analysis and X-ray were not good($4.00{\pm}3.03$ cases, $18.15{\pm}13.82%$). And leg length analysis were not sensitive. 3. On the whole, coincidence index between leg length analysis and X-ray were not good(best: 1 case, 45.5%; worst: 11 cases, 50.0%). Conclusions: Results form this investigation showed the relationship of leg length analysis and X-ray according 10 positions and valuation bases on diagnosis of pelvic malpositions. This results are expected to contribute to establish method of assessment in diagnosis of pelvic malpositions.

  • PDF