• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.453-458
• /
• 2013

HMM Speech recognition systems have a few weaknesses, including failure to recognize speech due to the mixing of environment noise other voices. In this paper, we propose a speech feature extraction methode using CHMM for extracting selected target voice from mixture of voices and noises. we make use of channel similarity and correlate relation for the selective speech extraction composes. This proposed method was validated by showing that the average distortion of separation of the technique decreased by 0.430 dB. It was shown that the performance of the selective feature extraction is better than another system.

• Journal of Periodontal and Implant Science
• /
• v.41 no.1
• /
• pp.23-29
• /
• 2011

Purpose: To investigate the healing pattern of the mucous membrane after tooth extraction necessitated by periodontal disease in the maxillary sinus. Methods: One hundred and three patients with 119 maxillary sinuses were investigated. Before implant placement, cone-beam computed tomography (CT) scanning was performed. The causes of extraction, the time elapsed since extraction, smoking, periodontal disease in adjacent teeth, and gender were recorded. In addition, the thickness of the mucous membrane of the maxillary sinus and the height of residual alveolar bone at the extracted area were calculated from CT images. Results: The thickness of the mucous membrane in the periodontal disease group ($3.05{\pm}2.71\;mm$) was greater than that of the pulp disease group ($1.92{\pm}1.78\;mm$) and the tooth fracture group ($1.35{\pm}0.55\;mm$; P<0.05). The causes of extraction, the time elapsed since extraction, and gender had relationships with a thickening of the mucous membrane of the maxillary sinus (P<0.05). In contrast, the height of the residual alveolar bone at the extracted area, periodontal disease in adjacent teeth, and smoking did not show any relation to the thickening of the mucous membrane of the maxillary sinus. Conclusions: The present study revealed distinct differences in healing patterns according to the causes of extraction in the maxillary sinus, especially periodontal disease, which resulted in more severe thickening of the mucous membrane.

• Food Science and Preservation
• /
• v.12 no.5
• /
• pp.436-441
• /
• 2005

This study was observed the effects of drying methods on the extraction characteristics of Rubi fructus (fruits of Rubus coreanus). Extraction yields of soluble solids and total sugar were high in the Rubi fructus dried by freeze drying, followed by infrared drying and sun drying. Extraction yield of phenolic compounds and DPPH radical-scavenging activity of extracts were in the following order; the Rubi fructus dried by freeze drying, the Rubi fructus dried by infrared drying, the Rubi fructus dried by sun drying. L value was the highest in the Rubi fructus dried by freeze drying, and a and b value were lowest in the fruit dried by freeze drying. These results suggest that freeze drying has an beneficial effect to enhance the quality of Rubi fructus. Water and ethanol extractions was more effective in the extraction of soluble solids and the antioxidative components.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.988-992
• /
• 2009

In this paper, we attempted to extract binary relations between terminologies using composite kernels consisting of convolution parse tree kernels and WordNet verb synset vector kernels which explain the semantic relationships between two entities in a sentence. In order to evaluate the performance of our system, we used three domain specific test collections. The experimental results demonstrate the superiority of our system in all the targeted collection. Especially, the increase in the effectiveness on KREC 2008, 8% in F1, shows that the core contexts around the entities play an important role in boosting the entire performance of relation extraction.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.111-120
• /
• 2005

Software development creates many product that class components, Class Diagram, form, object, and design pattern. So this Paper suggests Index/XML Sequence Relation information system for product abstraction and classification, the system of design product Sequence Relation abstraction which can store, reuse design patterns in the meta modeling database with pattern Relation information. This is Index/XML Sequence Relation system which can easily change various relation information of product for product abstraction and classification. This system designed to extract and classify design pattern efficiently and then functional indexing, sequence base indexing for standard pattern, code indexing to change pattern into code and grouping by Index-ID code, and its role information can apply by structural extraction and design pattern indexing process. and it has managed various products, class item, diagram, forms, components and design pattern.

• Coupled systems mechanics
• /
• v.10 no.6
• /
• pp.509-520
• /
• 2021

Fiber-reinforced concrete (FRC) is a composite material where small fibers made from steel or polypropylene or similar material are embedded into concrete matrix. In a material model each constituent should be adequately described, especially the interface between the matrix and fibers that is determined with the 'bond-slip' law. 'Bond-slip' law describes relation between the force in a fiber and its displacement. Bond-slip relation is usually obtained from tension laboratory experiments where a fiber is pulled out from a matrix (concrete) block. However, theoretically bond-slip relation could be determined from bending experiments since in bending the fibers in FRC get pulled-out from the concrete matrix. We have performed specially designed laboratory experiments of three-point beam bending with an intention of using experimental data for determination of material parameters. In addition, we have formulated simple layered model for description of the behavior of beams in the three-point bending test. It is not possible to use this 'forward' beam model for extraction of material parameters so an inverse model has been devised. This model is a basis for formulation of an inverse model that could be used for parameter extraction from laboratory tests. The key assumption in the developed inverse solution procedure is that some values in the formulation are known and comprised in the experimental data. The procedure includes measured data and its derivative, the formulation is nonlinear and solution is obtained from an iterative procedure. The proposed method is numerically validated in the example at the end of the paper and it is demonstrated that material parameters could be successfully recovered from measured data.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.711-718
• /
• 2013

This study examined the effect of 3 evaluation factors(extraction temperature, extraction time and drinking temperature) on the 5 tastes (sour, sweet, malty, salty and bitter) of coffee. the aim of this experiment were threefold: i) to investigate the change of the 5 tastes depending on the each 3 evaluation factor ii) to examine the change of the 5 tastes depending on the extraction time, drinking temperature under fixing the group of extraction temperature iii) to research the preference for the taste of coffee depending on 3 evaluation factors. As a result, in relation to the evaluation factors, significance difference was made at the sour taste. And when extraction temperature was higher and extraction time was longer, the sour taste was felt stronger. To the contrary, when drinking temperature was lower, sour was stronger. When the extraction Temperature group was controlled, the sour and malty taste were stronger. The sour taste was stronger when drinking temperature was lower and delicate flavor was stronger when drinking temperature was higher. High preference was demonstrated at extraction temperature($98^{\circ}C$), extraction time(0 minute), drinking temperature($60^{\circ}C$) and higher malty taste.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.85-93
• /
• 2011

The structural components of microorganism are quite related to the toxin and environmental conditions. The vegetative and dormant cells are quite affected by the physical and chemical environments to survive and they will be dormant when they are in the extreme environment. The mechanism to activate the microorganisms however, is not well defined yet in the area of activation state and sporulation state through the analysis of EPS. Other than that even the main mechanism of prior to acquisition of analysis values is not well understood. Therefore, what kind of specific environment to affect the activation and sporulation will be discussed through the analysis of the extracellular polymeric substances(EPS). EPS are a high molecular weight mixture of polymers presenting both outside of cells and interior of microbial aggregates. They are a major complex materials in microbial aggregation for sustaining them together in a three dimensional matrix. Three commonly used extraction methods were applied to this study their effectiveness and quantification in extracting EPS from several Bacillus microorganisms and activated sludge. Three extraction methods used for this study are regular centrifugation with formaldehyde (RCF), Steaming, and EDTA extraction. The results of EPS contents such as the quantitative proteins, carbohydrates and the ratio of protein versus carbohydrate from the several species with the several specific methods showed in this research. This study aims to get comparable results of the quantitative production of EPS and the effectiveness of sedimentation for Bacillus microorganisms and activated sludge from several wastewater treatment plans. The results revealed that the protein amount extracted was the highest by the Steaming method of three extraction methods before sporulation and the carbohydrate amount extracted was the highest by the RCA method of three extraction methods after sporulation. The higher amount of protein compared with carbohydrate from Bacillus microorganisms affected higher sedimentation efficiency, however it could not be found the relation between the EPS production and sedimentation efficiency for the activated sludge.

• Journal of Periodontal and Implant Science
• /
• v.33 no.4
• /
• pp.563-571
• /
• 2003

One of the central components of periodontal therapy is the improvement of esthetics. The presence and appearance of interdental papillae plays an important role of periodontal esthetics. The aim of the present study was to investigate how immediate provisional restoration preserve the shape of interdental papilla around the extraction socket and the width of bucco-lingual of gingiva. Another aim was to investigate the change in the interdental papilla and the amount of vertical bone fill of a extraction socket in relation to the interdental alveolar bone levels adjacent the alveolar socket. A total of 19 patients (11 male, 8 female, mean age of 50.57${\pm}$8.16), who visited the Department of Periodontology, Pusan National University and had more than one anterior tooth scheduled to be extracted due to an advanced periodontal disease were included in the present study. After initial periodontal therapy, the extracted teeth were reshaped of the root and placed into the socket followed by splinting with adjacent teeth with self-curing resin. The width of hucco-lingual of gingiva and interdental papilla height were measured at baseline, 1, 3, 6, 9 and 12 month and the periapical radiographic examination were taken at baseline, 6 and 12month following the extraction. The amount of vertical bone fill in the extraction socket were calculated. At 12 months following the extraction, the changes in mesial and distal interdental papilla and the width of bucco-lingual showed -1.06${\pm}$0.48mm, -0.844${\pm}$0.50mm, -1.50${\pm}$0.96m, relatively. The positional change in the interproximal papillae was significantly associated with the interdental bone level adjacent to the extraction socket(p=0.028). The higher the interproximal bone level adjacent the extraction socket, the greater the amount of bone fill in the extraction socket(p<0.001). In conclusion, it was thought that immediate provisional restoration could minimize the loss of the width of bucco-lingual and interproximal papillae around the extraction socket. In addition, the higher the interproximal bone level adjacent the extraction socket, the greater the amount of bone fill and the smaller the reduction of papillary height around the extraction socket.

• Journal of Internet Computing and Services
• /
• v.21 no.3
• /
• pp.123-131
• /
• 2020

Along with the rapid development of artificial intelligence technology, natural language processing, which deals with human language, is also actively studied. In particular, BERT, a language model recently proposed by Google, has been performing well in many areas of natural language processing by providing pre-trained model using a large number of corpus. Although BERT supports multilingual model, we should use the pre-trained model using large amounts of Korean corpus because there are limitations when we apply the original pre-trained BERT model directly to Korean. Also, text contains not only vocabulary, grammar, but contextual meanings such as the relation between the front and the rear, and situation. In the existing natural language processing field, research has been conducted mainly on vocabulary or grammatical meaning. Accurate identification of contextual information embedded in text plays an important role in understanding context. Knowledge graphs, which are linked using the relationship of words, have the advantage of being able to learn context easily from computer. In this paper, we propose a system to extract Korean contextual information using pre-trained BERT model with Korean language corpus and knowledge graph. We build models that can extract person, relationship, emotion, space, and time information that is important in the text and validate the proposed system through experiments.