• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.400-404
• /
• 2014

Purpose: Concerns over the quantity of available freshwater for agriculture have triggered the development of technologies intended to increase efficiency of water use, especially with regard to irrigation. A new technique called fertirrigation has been developed to use the same irrigation equipment for fertilization. Methods: Since the above-mentioned technique requires care during installation and use on farms, current analysis focuses on some of its characteristics. Results: High uniformity irrigation systems provide the best distribution of fertilizers, especially when used in combination with drip irrigation or micro-aspersion. The factors purity, compatibility, acidification, salinity, and solubility should be taken into account. Conclusions: Fertirrigation provides a significant increase in productivity as it allows for highly controlled nutrient application during the entire growing season. However, it may cause serious problems if misused or overused.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.46-47
• /
• 2006

Vascularization is essential for success in regenerative medicine. We have developed in vitro models to study how human microvascular endothelial cells (EC) and endothelial progenitor cells (EPC) colonize polymer scaffolds and express the endothelial phenotype, including angiogenesis. Examples are given of supportive growth and differeniation of EC on microfibre meshes of the silk protein fibroin and blends of starch with poly(epsilon-caprolactone), phenotypic markers being studied at both protein and mRNA level. Experimental models are also shown and concepts discussed to investigate how the stem cell niche, including that responsible for vascularization could be targeted, for example, by using engineered biodegradable polymer nanoparticles.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.1 no.1
• /
• pp.35-53
• /
• 1997

This paper analyzes the time complexity of Genetic Algorithm based Task Scheduling (GATS) which is designed for the scheduling of parallel programs with diverse embedded parallelism types in a heterogeneous network systems. The analysis of time complexity is performed based on two representation methods (REIA, REIS) which are proposed in this paper to encode the scheduling information. And the heterogeneous network systems consist of a set of loosely coupled parallel and vector machines connected via a high-speed network. The objective of heterogeneous network computing is to solve computationally intensive problems that have several types of parallelism, on a suite of high performance and parallel machines in a manner that best utilizes the capabilities of each machine. Therefore, when scheduling in heterogeneous network systems, the matching of the parallelism characteristics between tasks and parallel machines should be carefully handled in order to obtain more speedup. This paper shows how the parallelism type matching affects the time complexity of GATS.

• Journal of Trauma and Injury
• /
• v.32 no.1
• /
• pp.51-59
• /
• 2019

Unstable pelvic ring lesions are usually treated with internal fixation. In patients presenting clinical instability or soft tissue complication risk, external fixation is a safe treatment option. However, pin tract infection, insufficient biomechanical properties, difficulty sitting and changing decubitus are important drawbacks related to the treatment. The present study reports the association of anterior and posterior subcutaneous internal fixation by applying spine-designed implants on the pelvic ring disruption: supra-acetabular pedicle screws with an interconnecting rod (Infix), plus posterior transiliac fixation with the same system, which the authors have named the "Hula Hoop Technique".

• Imaging Science in Dentistry
• /
• v.47 no.2
• /
• pp.129-133
• /
• 2017

Dentinogenesis imperfecta is a dominant autosomal hereditary disorder of dentin formation that affects the deciduous and permanent teeth. Its etiology is characterized by inadequate cell differentiation during odontogenesis. The clinical characteristics of dentinogenesis imperfecta are discolored teeth with a translucency that varies from gray to brown or amber. Radiographically, the teeth exhibit pulp obliteration, thin and short roots, bell-shaped crowns, and periapical bone rarefaction. The aim of this report was to present a case of dentinogenesis imperfecta type II that was followed up over a 17-year period. This report also presents scanning electron microscopy images of the enamel and dentin, showing that both were altered in the affected teeth. The disease characteristics and the treatments that were administered are reported in this study to guide dentists with respect to the need for early diagnosis and adequate follow-up to avoid major sequelae.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.819-826
• /
• 2020

The method of the Laplace transform has been used to obtain an analytical solution of the three-dimensional steady state advection diffusion equation for the airborne radionuclide release from any nuclear installation such as the power reactor in an area source. The present treatment takes into account the removal of the pollutants through the nuclear reaction. We assume that the pollutants are emitted as a constant rate from the area source. This physical consideration is achieved by assuming that the vertical eddy diffusivity coefficient should be a constant. The prevailing wind speed is a constant in 𝑥- direction and a linear function of the vertical height z. The present model calculations are compared with the other models and the available data of the atmospheric dispersion experiments that were carried out in the nuclear power plant of Angra dos Reis (Brazil). The results show that the present treatment performs well as the analytical dispersion model and there is a good agreement between the values computed by our model and the observed data.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.5225-5228
• /
• 2012

Introduction : The objective of this study was to analyze the complication rates after completion thyroidectomy and compare them with primary total benign and malign thyroidectomy causes in total of 647 patients. Patients and Methods: Among 647 patients, there were 159 receiving completion thyroidectomy for differentiated thyroiud cancer (DTC) (Group 1); 217 patients receiving total thyroidectomy for DTC (Group 2) and 271 given total thyroidectomy for benign diseases (Group 3). Results: When groups were compared for complications, there were no significant difference except temporary hypocalcemia between completion thyroidectomy and total thyroidectomy for DTC. When the total thyroidectomies were compared (Group 2 and 3), there were no significant difference observed except unilateral temporary RLN palsy. Conclusion: With improvements in surgical technique and experience, complication rates of thyroidectomy performed for benign or malign diseases are reduced. In spite of the improvement in surgical experience, temporary RLN palsy and hypoparathyroidism are the main complications in completion thyroidectomies which need special attention. To evaluate the patients more carefully in preoperative period and performing adequate thyroidectomy appears more logical.

• Korean Journal of Veterinary Research
• /
• v.56 no.3
• /
• pp.161-166
• /
• 2016

Hyperadrenocorticism (HAC) is a common endocrinopathy among dogs that causes multisystemic signs. This study was conducted to evaluate cardiocirculatory, biochemical, and hemostatic parameters in dogs with HAC at diagnosis, in addition to verifying whether abnormal parameters could be controlled by initial treatment with trilostane. Fifteen dogs with HAC were assessed by systolic blood pressure measurement, electrocardiography, Doppler echocardiography, serum concentration of troponin I, and biochemical and hemostatic profile at diagnosis and after trilostane therapy. Unlike biochemical parameters, hemostatic and cardiocirculatory parameters were not significantly influenced by the onset of treatment. The authors believe that clinical treatment with trilostane for 3 to 4 months might not be sufficient for the stabilization of cardiocirculatory abnormalities such as hypertension. Therefore, dogs with HAC must receive cardiocirculatory monitoring at diagnosis and during drug treatment.

• Smart Structures and Systems
• /
• v.1 no.3
• /
• pp.267-282
• /
• 2005

This work describes ongoing development of an embedded sensor system for the early detection and prevention of deterioration of reinforcing steel tendons within reinforced concrete. These devices will evaluate the condition of the steel tendon using ultrasonic techniques and then wirelessly transmit this data to the outside world without human intervention. The ultrasonic transducers and the interpretation of the sensed signals that allow detection and prognosis of tendon condition are detailed. Electrical characterization of concrete mixtures used in bridge construction is conducted and a wideband microstrip antenna is designed and fabricated to operate between 2.4 and 2.5 GHz when embedded in such a medium. Simulations and measurements of the embedded antenna element are presented. Transceiver selection and implementation are discussed as well as future work in operational protocols, sensor networking, and power sources. By implementing commercially available off-the-shelf components whenever possible, these devices have the potential to save millions of dollars a year in evaluation, repair and replacement of reinforced concrete.

• Smart Structures and Systems
• /
• v.7 no.1
• /
• pp.15-25
• /
• 2011

The mechanical properties obtained from mechanical tests, such as tensile, buckling, impact and fatigue tests, are largely applied to several materials and are used today for preliminary studies for the investigation of a desired element in a structure and prediction of its behavior in use. This contribution focus on two widely used different tests: tensile and fatigue tests. Small PZT (Lead Titanate Zirconate) patches are bonded on the surface of test samples for impedance-based health monitoring purposes. Together with these two tests, the electromechanical impedance technique was performed by using aluminum test samples similar to those used in the aeronautical industry. The results obtained both from tensile and fatigue tests were compared with the impedance signatures. Finally, statistical meta-models were built to investigate the possibility of determining the state of the structure from the impedance signatures.