• Structural Engineering and Mechanics
• /
• 제46권5호
• /
• pp.615-627
• /
• 2013

One of the most common defects in reinforced concrete bridge decks is corrosion of steel reinforcing bars. This invisible defect reduces the deck stiffness and affects the bridge's serviceability. Regular monitoring of the bridge is required to detect and control this type of damage and in turn, minimize repair costs. Because the corrosion is hidden within the deck, this type of damage cannot be easily detected by visual inspection and therefore, an alternative damage detection technique is required. This research develops a non-destructive method for detecting reinforcing bar corrosion. Experimental modal analysis, as a non-destructive testing technique, and finite element (FE) model updating are used in this method. The location and size of corrosion in the reinforcing bars is predicted by creating a finite element model of bridge deck and updating the model characteristics to match the experimental results. The practicality and applicability of the proposed method were evaluated by applying the new technique to a two spans bridge for monitoring steel bar corrosion. It was shown that the proposed method can predict the location and size of reinforcing bars corrosion with reasonable accuracy.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.503-507
• /
• 2000

The corrosion protection methods of reinforcing steel in concrete are the various methods such as increasing thickness of cover concrete, using of reinforcing bars coated with epoxy, dosage of corrosion inhibitor as concrete admixture, cathodic protection method and etc. In this study, the performance of corrosion protection was investigated for the test specimens using corrosion inhibitors and cathodic protection, respectively. For this purpose, the accelerated corrosion tests for reinforcing steel were conducted according to the periodic cycles(140 days) of wetting($65^{\circ}C$, 90% R.H) and drying period($15^{\circ}C$, 65% R.H) for the test specimens. As a result, it can be concluded from the test that the effect of corrosion inhibitor was found to be variable with products, the cathodic protection method was found to be independent of salt concentration in concrete.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.141-148
• /
• 1998

The chloride attack of the top mat of reinforcing bars is a major cause of deterioration of comcrete deck of plate girder bridges. This is caused by a current design method which requires a top mat of reinforcing bars to resist a negative bending moment in bridge decks. In recently, empirical evidence has indicated that the top transverse reinforcing bars can patially or fully be eliminated without jeopardizing the structural integrity of a deck. So, one of the most efficient way to increase durability of concrete deck of bridges is the development of new design method that reduce or eliminate the top mat reinforcing bars, mad it is possible by the exact analysis that considering the negative bending moment reducing effect which introduced by relative deflection of plate girders. In this study, we develop the new bridge deck analysis method that considered the effect of relative girder deflection by applying the principles of slope deflection method of frames, and that is fine tuned with results of finite element analysis. This new approach evaluate a bending moment in a deck based on the effect of relative girder deflection as well as the magnitude of wheel loads, the girder spacing and stiffness, deck stiffness and the span length

• 한국건축시공학회지
• /
• 제21권6호
• /
• pp.617-627
• /
• 2021

본 연구에서는 공동주택의 리모델링 시 기초보강공법의 하나인 하중전이 장치를 이용한 기초보강공법에 대해 3차원 유한요소 수치해석 연구를 수행하였다. 실대형 현장실험을 통해 수치모형을 검증하였고, 매개변수 해석을 통해 하중전이장치의 마찰계수, 말뚝의 축강성이 기초보강공법의 성능에 미치는 영향을 확인하였다. 그 결과 하중전이 장치를 이용한 기초보강공법은 보강 중, 보강 후에도 기존 말뚝에 작용하는 하중을 자유롭게 조절가능함을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.201-204
• /
• 2006

The shear resistance of RC beams is subject to the amount of shear-reinforcing bars ($p_w$) and yield strength ($f_{wy}$) as well as their interactive influence ($p_wf_{wy}$). Thus, it is reasonably expected that high-strength steel bars can greatly reduce the necessary amount of shear-reinforcing bars. On the other hand, although the bond strength is influenced by the amount of shear reinforcing bars, it is not affected by the yield strength. Thus, there is often an issue that bond failure occurs before shear failure depending on the arrangement of shear reinforcing bars. It is a common practice to set sub-ties for the transverse confinement of the main re-bars as a method to prevent the bond failure. However, it can also become a factor in decreased work efficiency due to the complexity of the construction. This study experimented with simultaneous use of high-strength transverse reinforcing bars ($f_{wy}=800MPa$) and U-shaped transverse reinforcing bars of regular strength ($f_{wy}=300MPa$) in an attempt to decrease the necessary quantity of shear reinforcing bars. The effect of this attempt was investigated through fundamental experimental research in terms of the improvement in shear resistance and bond strength as well as the ease of construction.

• 한국지반환경공학회 논문집
• /
• 제9권6호
• /
• pp.5-12
• /
• 2008

본 연구에서는 타이어셀로 보강된 모래지반에 대한 평판재하시험을 유한요소법에 의해 모델링하였다. 타이어셀의 기능과 외양은 지오셀과 비슷하며 지오셀과 마찬가지로 토목구조물에서 지반보강 목적으로 사용할 수 있다. 해석결과는 모델링의 적절성을 평가하기 위해 현장 재하시험결과와 비교하였다. 두 결과의 비교로부터 유한요소해석에 의한 침하량은 극한지지력에서 실험결과와 유사한 값을 나타내었다. 모델링을 검증한 후 타이어셀의 보강깊이와 보강층 수의 변화에 대한 해석을 수행하였다. 보강효과는 보강깊이가 증가함에 따라 감소하였으며 이러한 경향은 기존의 시험결과와 유사하였다. 보강층수가 증가함에 따라 보강효과는 증가하였다. 그러나 2층 이상의 보강은 효과가 무시할 정도였다. 결론적으로 본 연구에서의 모델링 방법은 타이어셀을 사용한 지반구조물의 해석에 사용할 수 있을 것으로 생각된다.

• 한국지반공학회논문집
• /
• 제26권10호
• /
• pp.5-14
• /
• 2010

토사안정제를 이용한 비탈면 보강공법은 환경친화적이고 원지반의 강도증대를 통한 비탈면안정성을 확보하는 방법이다. 그러나 비탈면 보강공법으로 적용할 경우 현장토질과의 혼합에 따른 실제 강도증가 정도가 명확하지 못하고 보강효과에 대한 연구가 부족하여 현장에서 많이 적용되고 있지 못하고 있는 실정이다. 본 논문에서는 토사안정제 혼합율에 따른 지반강도증가 효과를 알아보고 수치해석을 통하여 비탈면 설계 적용시 비탈면 높이에 따른 적정 보강두께를 제시하고자 하였다. 실험결과 토사안정제 함량별로 강도증가가 차이는 있지만 대략 2.0~3.0배정도 강도가 증가 효과가 있는 것으로 나타났으며 수치해석을 통해서도 비탈면 높이에 따른 적정높이를 산정할 수 있었다. 향후 비탈면 보강목적으로 토사안정제의 활용도가 높을 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.807-812
• /
• 1999

Locating of reinforcing bars, in particular to know their accurate depths, is very important thing in radar inspection of concrete structures. By the way, a depth estimation of reinforcing bars in concrete structures by the radar is not easy because micorwave propagation velocity in test area is generally unknown. This problem can be solved by Generalized Hough transformation technique. Using this technique, the micorwave propagation velocity in test area can be detected from the radar image, which appear as hyperbolas conveying the velocity information in their shape. A developed speed-up technique for the computation of the Generalized Hough transformation is also investigated in this study. As a result, although it becomes difficult to locate reinforcing bars when multiple parallel bars lying too close together, there is a possibility of detecting accurate depths of reinforcing bars in test area by the proposed method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.471-476
• /
• 2003

The presence of voids under pavements or behind tunnel linings results in their deterioration. To detect these voids effectively by non-destructive tests, a method using radar was proposed. In this research, not only the detection of shape of voids, but also the location of reinforcing bars by radar image analysis is investigated. The experiments and image processing were conducted to detect voids and to locate reinforcing bars in or under concrete pavements (or tunnel linings) with reinforcing bars. From the results, the fundamental algorithm for tracing the reinforcing bars and voids, improving the horizontal resolution of the object image and detecting shape of objects, was verified.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.579-584
• /
• 1997

This experimentation is to apperciation an efficiency of repair for processing crack by corrosion of steel reinforcing, Crack on concrete by corrosion of steel reinforcing is the fact that the first crack appear on the surface of water because of supplying is of oxygen and water. The crack processing is on surface to be contacted by air and to bottom as mainly the vertical direction from a surface of water. The experimentation gives rise to crack in model by electricity. Crack by corrosion of steel reinforcing is more internal crack than external crack. since it is so. crack by corrosion of steel reinforcing have to attention to repair or intermal crack.