• 제목/요약/키워드: Reinforcing factors

검색결과 286건 처리시간 0.025초

타펠 외삽법을 이용한 NaCl 및 LiNO2가 첨가된 철근 콘크리트의 방식성능 평가에 관한 실험적 연구 (A Experimental Study on Evaluation of Anti-Corrosion Performance of Reinforced Concrete with Chloride and Inhibitor Using Tafel Extrapolation Method)

  • 박동진;박장현;김영관;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 춘계 학술논문 발표대회
    • /
    • pp.7-8
    • /
    • 2017
  • Corrosion of reinforced concrete embedded in concrete is a deterioration phenomenon due to intrusion of embodied or Airborne chloride ions. Corrosion of a embedded steel increases the volume of the rebar and causes damage to the structure such as cracking and peeling of the concrete. This causes penetration of various corrosive factors and accelerates the corrosion of reinforcing bars, which has a serious effect on the durability of the structure. Researches on the corrosion phenomenon of these rebars by electrochemical methods have been carried out for a long time, but it is a lack of research in Korea. Therefore, in this study, one of electrochemical experimental methods, Tafel extrapolation method, was used to evaluate the performance of reinforcing bars according to the amount of NaCl and LiNO2 added to concrete.

  • PDF

복개 터널구조물의 현장 시공에 따른 계측 분석 사례 (Field Measurements with the Construction of Cut and Cover Tunnel)

  • 박시현;이석원;이규필;배규진;전오성;이종성
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.149-156
    • /
    • 2002
  • Field measurements were carried out in this study to investigate the behavior of cut and cover tunnel such as the distribution and the magnitude of the earth pressure during back fill process of the ground material. Three kinds of measuring instruments, such as the earth pressure load cell, the concrete strain gauge and the reinforcing bar meter of embedded type in concrete structure were installed and measured. Earth pressure load cells, installed after construction of the tunnel lining, measure the outside forces acting on the tunnel lining with radial directions. Three load cells were installed at the crown, the right and the left shoulder of the tunnel, respectively. Three sets of reinforcing bar meter were installed in the double reinforcements of the tunnel lining and their locations were the same with the position of the earth pressure load cells. Concrete strain gauge was installed only one site of the upper compressive part at the tunnel crown. Based on the measuring results in the field, the deformation and the earth pressure acting on the tunnel lining were investigated with the back fill process of the ground material. Considerations on the validity of the measuring results were paid. For the analysis of measurements, after dividing back fill process into three steps, various factors which affect on the behavior of tunnel lining were investigated at each step.

  • PDF

朱丹溪 關聯書籍 7種에 나타난 外科疾患의 文獻的 考察 (A Literature Study on surgical disease in seven medical books related with Ju Dan Gye(朱丹溪))

  • 이석진;노석선;주영승;노진구
    • 한방안이비인후피부과학회지
    • /
    • 제8권1호
    • /
    • pp.131-132
    • /
    • 1995
  • After studing of viewpoint of surgical disease in seven medical books related with Ju Dan Gye(朱丹溪) among four eminent physicians in the Jin and Yuan dynasties(金元四大家) I get conclsion as following. 1. Studied surgical diseases are total 40 kinds. 2. In 40 kinds surgical diseaes, case of having theory are 20 kinds, cases of having no theory and having only treatement by medicine are 20 kinds. 3. In therapy, cases that mainly use a method to eliminate pathogenic factors are 27 kinds; Acute mastitis(乳癰), Deep-seated mammary abscess(내巖), Acute appendicitis(陽癰), Bone cellulitis(附骨疽), Carbuncle of the lower abdomen near external genitalia(便毒), Leprosy(癩風), Macule(斑), Rash(疹), Urticaria(은疹), Scrofula(나역), Stagnant plegm(結核), Goiter andtumer(영유), Erysipelas(丹), Furuncle(정瘡), Scabies(疥瘡), Chancre(下疳瘡), Syphilitic skin disease(樣梅瘡), Incised wound (金瘡), Dermatopathy of lower limb and heel(脚足部瘡), Pemphigus(天疱瘡), Itching eruption due to blood-heat or wind heat(血風瘡), Dermatopathy of head(頭面瘡), Scald and burn(湯火瘡), Tetanus(破傷風) , Ecthyma(염瘡), Fistula(久漏瘡), Tinea(癬瘡), Cases that mainly use external therapy are 5 kinds; Rhagades of hand and foot(手足군裂), Vulvar ulceration(婦人陰瘡), Chilblain(凍瘡), Rabies(풍狗咬), Tinea capitis(白禿瘡), Cases that mainly use a reinforcing method are 4 kinds; Internal deep-rooted carbuncle(內疽), Pruritus and dryness of skin(皮膚乾燥), Anul fistula(漏瘡), Macule Caused by disorder of internal organ(內傷發斑), Cases that mainly use eliminating first and then reinforcing are 2 kinds; Pyogenic infection and ulcerous disease of slin( 疽瘡상癰疽瘡瘍), Lung abscess(肺癰), Case that mainly uses reinforcement and elimination in combination is only Haemorroid(痔瘡). Case divided into two groups that are reinforcing method and a method to eliminate pathogenic factor is only Trauma(打撲). Case that have no treatment by medicine is only Abscess of the scrotum(囊癰). 4. In 40 kinds surgical diseases, we can know that except a few important surgical diseases, Ju Dan Gye haven't distinguished viewpoint in many surgical diseases, because there are many cases that have no theory and have only simple treatment of medicine, and that mainly use a method to eliminate pathogenic factors and external therapy. 5. Representative theory of Ju Dan Gye, nourishing Yin and extinguishing fire(滋陰降火), has little effect on therapy of surgical disease. We need to try statistical division of internal and external remedy in the future, and by studing of surgical disase in medical books related with four eminent physicians in the Jin and Yuan dynasties, I think we can see their viewpoint of surgical disease.

  • PDF

PRECEDE 모형을 이용한 일부 초등학교 안전교육의 진단적 연구 (A Diagnostic Study of safety education in elementary schools based on PRECEDE Model)

  • 백경원;이명선
    • 보건교육건강증진학회지
    • /
    • 제18권1호
    • /
    • pp.35-47
    • /
    • 2001
  • As the complexity of the our environment is further complicated by advancements in industry and increase in vehicle traffic flow, the incidents of injury causing accidents are on the rise. Consequently, there is increasing emphasis on the importance of systematic and continual safety education for injury preventive behaviors. This study investigates safety related problems of elementary school students based on the PRECEDE model, proposed by Green et al.(1980 Green), to comprehensively identify the requirements of school safety education. The identified requirements were used to diagnose the current state of elementary school safety education through the analysis of multidimensional factors. A questionnaire survey was conducted on 594 sixth grade students from randomly selected 4 schools in Seoul to examine their injury preventive behaviors and to determine the educational diagnosis variables that affect it. The duration of the survey was 3 weeks starting from April 12, 1999 to May 8, 1999. A summary of the survey results are presented below; 1. Situations in which accidents have occurred were, in their order of frequency, ‘during play or sports activities within the school grounds’ was most frequent at 59.6%, ‘during play on local streets’ at 49.5%, and ‘traffic accidents’ at 41.6%. 2. Categorization of the injury preventive behavior showed that ‘not playing at high traffic flow locations such as streets and construction sites’ had the higher level of observance, while ‘wearing of helmets and joint protection devices during playing’ was least observed. 3. Considering injury preventive behaviors in relation to educational diagnosis variables indicated, for predisposing factors, lower ‘perception to injury accidents’ (p〈0.001) combined with higher ‘concerns for injury accidents’(p〈0.001), ‘practice of preventive behavior’(p〈0.001), and ‘the level of safety knowledge’(p〈0.001) resulted in significantly higher observance of injury preventive behaviors. For enabling factors, higher ‘perceived level of the school safety education’ (p〈0.001) and ‘availability of safety education resources’(p〈0.01) indicated significantly higher observance of injury preventive behaviors. For the reinforcing factor, frequent exposure to ‘safety education brochure’ (p〈0.01) and ‘audio-visual material for safety education’(p〈0.01) combined with more ‘regional safety education’ (p〈0.01), ‘home safety education’ (p〈0.01), ‘school safety education’(p〈0.001), and, ‘parents’ observance of preventive behaviors' (p〈0.001) showed significantly higher observance of injury preventive behaviors. 4. An analysis of the factors that affect injury preventive behaviors showed that the enabling factor ‘awareness of school safety education’ had the highest correlation with injury preventive behaviors followed by factors, in their order of significance, ‘practice of preventive behavior’, ‘perception to injury accidents’, ‘level of safety knowledge’, ‘parents’ observances of preventive behaviors', and ‘concerns for injury accidents.’

  • PDF

휨보강된 철근콘크리트보의 확률론적 고찰 (Probabilistic Considerations on Strengthened Reinforced Concrete Beam for Flexural Loads)

  • 이차돈;최봉섭;김수정
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.733-738
    • /
    • 2001
  • Although there are strong needs for evaluating statistical characteristics of strengthened reinforced concrete beams under flexure, many researches have been performed mostly on the mechanical properties and failure mechanisms. Different material properties and resulting reinforcing effect could alter the probabilistic values of the strengthened beams. Existing equations suggested for predicting flexural strengthened reinforced concrete beam with CFRP and steel plate are selected and best-fitting one is used in evaluating probability of failure based on Monte-Carlo method. Influential factors are statistically examined and approximate strength reduction factors are suggested. It was found that the factor is more sensitively influenced by predictive equations as well as characteristics and amounts of strengthening materials.

  • PDF

간호대학생의 인문학적 소양과 공감능력이 윤리적 가치관에 미치는 영향 (Influence of Humanities and Empathy on Ethical Values of Nursing Students)

  • 김문정
    • 수산해양교육연구
    • /
    • 제28권6호
    • /
    • pp.1865-1874
    • /
    • 2016
  • This study was to identify the factors of ethical values in nursing students. The survey was conducted in two nursing colleges (n=180) using self-reported questionnaire. The data were analyzed with descriptive statistics, t-tests, ANOVA, Pearson's correlation coefficient and multiple regression analyses using SPSS/WIN 21 software. Influencing factors of ethical values were empathy(t=3.436, p=.001), teaching method except lecture(t=3.037, p=.003), and curriculum track at high school(t=2.309, p=.022). The model was statistically significant explaining 16.2% of the variance (F=11.185, p<.001). This study suggests that strategies for increasing nursing students' ethical values include reinforcing empathy, utilizing various type of teaching method except lecture in nursing ethics class, and allowing high school students applying to college of nursing regardless of their curriculum track.

또래괴롭힘 상황에서 주변또래 유형의 판별변인 분석 (Analysis of Variables for Classifying Types of Outsiders in Bullying Situations)

  • 서미정;김경연
    • 아동학회지
    • /
    • 제27권6호
    • /
    • pp.35-51
    • /
    • 2006
  • The purpose of the present study was to identify variables for predicting types of outsiders and possible mitigating factors in bullying situations. Participants were 344 $5^{th}$, $6^{th}$ and $7^{th}$ grade students(159 boys and 185 girls). Involvement of outsiders in bullying was examined by proportion. Major findings were that; (1) Over half of the sample(65.4%) were involved in bullying by either actively reinforcing(bully-followers; 6.4%) or passively observing(bystanders; 59.0%); 34.6% were defenders of victims. (2) Multiple discriminant analysis yielded a function of 3 variables(empathy, risk burden, and prosocial moral reasoning) that was effective in classifying bully-followers, bystanders, and victim-defenders. Empathy and prosocial moral reasoning predicted victim-defenders and risk burden predicted bully-followers and bystanders.

  • PDF

A REVIEW ON DEVELOPING INDUSTRIAL STANDARDS TO INTRODUCE DIGITAL COMPUTER APPLICATION FOR NUCLEAR I&C AND HMIT IN JAPAN

  • Yoshikawa, Hidekazu
    • Nuclear Engineering and Technology
    • /
    • 제45권2호
    • /
    • pp.165-178
    • /
    • 2013
  • A comprehensive review on the technical standards about human factors (HF) design and software reliability maintenance for digital instrumentation and control (I&C) and human-machine interface technology (HMIT) in Japanese light water reactor nuclear power plants (NPPs) was given in this paper mainly by introducing the relevant activities at the Japan Electric Association to set up many industrial standards within the traditional framework of nuclear safety regulation in Japan. In Japan, the Fukushima Daiichi accident that occurred on March 11, 2011 has great impact on nuclear regulation and nuclear industries where concerns by the general public about safety have heightened significantly. However for the part of HF design and software reliability maintenance of digital I&C and HMIT for NPP, the author believes that the past practice of Japanese activities with the related technical standards can be successfully inherited in the future, by reinforcing the technical preparedness for the prevention and mitigation against any types of severe accident occurrence.

수학관의 요인에 관한 연구 (A study on the factor in a view of mathematical learning)

  • 김상룡
    • Journal of the Korean Data and Information Science Society
    • /
    • 제27권2호
    • /
    • pp.295-304
    • /
    • 2016
  • 본 논문에서는 초등학생을 대상으로 수학관의 요인을 규명하고, 이들 하위 요인에 대해 학년 및 성별 차이를 알아보았다. 수학관의 하위요인들로는 자신감, 유용성, 수학의 거부감, 활용능력, 전통적 수학 학습관이라는 5개의 하위 요인으로 설명되어진다. 그리고 3학년, 6학년 각각을 대상으로 수학관에 대한 요인분석을 실시하여 학년 간 요인의 특성을 알아보았다. 분석 결과 요인들은 조사대상자가 처한 상황과 특성에 따라 다를 수 있음을 알 수 있었다. 3학년이 6학년보다 자신감과 활용능력 측면에서 보다 긍정적임을 알 수 있었으며, 이는 곧 현장의 수학교육은 수학함이 실행되고, 수학 학습 방법을 강화하여 지도하는 것이 필요함을 시사하는 것임을 알 수 있다.

PDM 시스템의 평가에 관한 연구 (Evaluation Factors of PDM Systems)

  • 강석호;김영호;황영헌;김대환
    • 한국전자거래학회지
    • /
    • 제1권1호
    • /
    • pp.209-226
    • /
    • 1996
  • System Intergration (SI) has resently been conceived as one df the most important tools for enforciong and reinforcing the competitiveness of an enterprise. A major concern of SI lies in sharing many types of information, such as engineering, production, finance, marketing, and so on. Product Data Management (PDM) systems are mainly concerned with product- related information, and also support a large portion of the Commerce At Light Speed (CALS) straitegy. PDM systems receive a great amount df attention form industry, A variety of PDM solutions have been introduced for the last few years, and its market has expanded very fast with an annual growth of 30%. However, in general, it is not an easy task to choose a right PDM solution for a particular company. A major purpose of this paper is to provide essential factors in evaluating PDM systems. While developing the factors. we consider the expected future trend of PDM technologies and three types of PDM-based intergration (frontward, rearward, and sideward integrations). We Propose to carry out the evaluation process in two fold. An overall evaluation is performed first to narrow down many alternatives into a few candidate systems, and then a detailed technical evaluation step follows to determine the final solution. A number of influencing factors are categorized and described in each of these steps.

  • PDF