• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.4
• /
• pp.55-66
• /
• 2011

The objective of this study was to investigate the possibility of seeding methods for quarry rehabilitation. To achieve the objective, the experiment was designed for rehabilitation of quarry with seed mixing types (woody type and herbaceous type) and forest topsoil. Seeds and seeding materials were applied to the quarry slope using hydroseeding measures. The study was conducted in limestone quarry (Lafarge Halla Cement Inc.) near Baekdu Daegan Mountain System at Okke, Kanwon-do. The experimental seedbed was set in 2007 and field investigation was carried out from 2007 to 2010. As the result of experiment, it was found that the early-phase pattern for surveyed species to establish was affected by the soil mixture types. The mixture type of herbaceous seeds resulted in the higher plant coverage than the woody seeds. The application of forest topsoil showed a potential increase the plant diversity, but it was affected by mixing seeds. Naturally-emerged species as Alnus hirsuta, Quercus mongolica will be useful for rehabilitation at the quarry and damaged slopes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.6
• /
• pp.744-750
• /
• 2015

The objectives of this study were to investigate soil chemical characteristics for forest rehabilitation and suggest management in abandoned coal mine areas in Boryeong City, Chungcheongnam-do. Total study sites were seven sites, and soil properties analyzed were soil pH, total organic carbon (TOC), total-N, C/N ratio, and available $P_2O_5$ (A.v. P). Average soil pH (range) was 5.9 (4.5~7.0). Three study sites (Samgwang, Shinsung1, and Shimwon1) showed lower soil pH than standard (pH 5.6~7.3) of Korea Industrial Standards (KS) for abandoned coal mine forest rehabilitation. Average contents of TOC, and total-N were 1.5% (0.1~4.7%), and 0.10% (0.03~0.23%), respectively. Five study sites where the collapsed time was less than 10 years (Wangjashingang, Wonpoong, Samgwang, Shinsung1, and Shinsung2) showed lower TOC level than standard of KS (more than 1.2%). Wangjashingang, Wonpoong, Samgwang, and Shinsung1 showed lower level of total-N than standard of KS (more than 0.09%). C/N ratio of six study sites except Shimwon1 was out of proper range (15:1~30:1). Average A.v. P (range) was $20.7mgkg^{-1}$ (4.8~63.1), less than other abandoned coal mine fores rehabilitation areas in Mungyong City, and Hwasun-gun. TOC, total N and A.v. P increased with elapsed time from forest rehabilitation, while other soil properties did not show distinct pattern. Betula platyphylla was planted in Samkwang and Sinsung where soil pH was less than KS standard. Because the growth of Betula platyphylla can be limited in acid soil, it is necessary to neutralize soil pH to proper level with some soil amendment such as lime or shell of oyster. Furthermore, TOC, total-N and A.v. P in early stage of forest rehabilitation showed lower level than proper to vegetation growth. Therefore it needs continuous monitoring of soil characteristics and fertilization for vegetation growth and influx from surrounding forest in early stage of rehabilitation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.805-813
• /
• 2018

The research was conducted with the purpose of providing effective safety and quality control system for assistive products for handicapped those are used extensively. Assistive products couldn't be classified independently due to collision with the act of medical device and lack in legal basis. The issues about safety and quality have been solved by other legal frames on a case by case basis. We couldn't find any abroad case of independent safety and quality control policy. For the practical solution, this article suggested hybrid classification system mixed with existing policies. Each classified branches are allocated to the appropriate policy of safety and quality control so those are ease of understanding and prospect. And also a delicacy process was suggested not to leave off any assistive products. Through these suggests of the improvement it is expected that blind areas of safety and quality control for assistive products for handicapped could be solved and identity of assistive products could be established to provide product safety for handicapped and boost relevant industries.

• Steel and Composite Structures
• /
• v.2 no.1
• /
• pp.67-84
• /
• 2002

Traffic decks of steel or composite motorway bridges sometimes provide the opportunity of using the composite action between an existing steel deck and a reinforced concrete plate (RC plate) in the process of rehabilitation, i.e., to increase the load-carrying capacity of the deck for concentrated traffic loads. The steel decks may be orthotropic decks or also unstiffened steel plates, which during the rehabilitation are connected with the RC plate by shear studs, such developing an improved local load distribution by the joint behaviour of the two plate elements. Investigations carried out, both experimentally and numerically, were performed in order to quantitatively assess the combined static behaviour and to qualitatively verify the usability of the structure for dynamic loading. The paper reports on the testing, the numerical simulation as well as the comparison of the results. Conclusions drawn for practical design indicated that the static behaviour of these structures may be very efficient and can also be analysed numerically. Further, the results gave evidence of a highly robust behaviour under fatigue equivalent cyclic traffic loading.

• Physical Therapy Korea
• /
• v.12 no.4
• /
• pp.26-32
• /
• 2005

This study was purposed to provide basic information on the correct application of a wheelchair's backrest angle by investigating the change in cardiopulmonary function according to backrest angle during propulsion. This study examined the effects of the wheelchair's backrest angle on the cardiopulmonary function by varying the angle to $0^{\circ}$, $10^{\circ}$ and $20^{\circ}$ with a propulsion velocity of 60 m/min. The experimental parameters were respiration rate, oxygen consumption rate and oxygen consumption rate/kg which were measured by a portable wireless oxygen consumption meter (COSMED, $K4b^2$). The results of the study were as follows: 1) There were no statistically significant differences in respiration rates due to changes in the wheelchair backrest angle (p>.05). 2) There were statistically significant differences in oxygen consumption rates due to changes in the wheelchair backrest angle (p<.05). 3) There were also statistically significant differences in the oxygen consumption rate/kg due to changes in the wheelchair backrest angle (p<.05). In conclusion, changes in the backrest angle of wheelchairs during propulsion influences oxygen consumption rates and heart rates, while respiration rates are not affected. Therefore, a training program for good seating and posture needs to be provided, and the wheelchair seating system should be equipped with the unadjustable-angle wheelchair to reduce the functional load on the cardiopulmonary system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.733-737
• /
• 2012

The objectives of this study were to investigate soil chemical properties for forest rehabilitation and suggest design and management in abandoned coal mine areas in Mungyeong, Gyeongsangbuk-do. Total study sites were 10 sites, and soil analysis particular were soil pH, TOC, total-N, C/N ratio, A.v. $P_2O_5$, and CEC. Because most of study sites showed soil pH from 5.0 to 7.0, it seems that soil pH does not affect growth of vegetation. But soil pH in Danbong1 was acidic (pH 4.6), so it is needed to improve with ameliorant such as limestone. Most of study sites is necessary to manage for organic matter and Nitrogen, because there sites showed lower value of TOC and total-N than general forest. The values of A.v. $P_2O_5$ and CEC were good in most of study sites, so it seems that they do not have effect on vegetation growth. All of soil factors has no regression according to elapsed time after rehabilitation. TOC, total-N and A.v. $P_2O_5$ among soil properties have positive relationship between each other. It is necessary to fertilizer for organic matter and Nitroge because of value in TOC, total-N and C/N ratio. The results of this study were analyzed only one time. So, long-term monitoring for soil properties is important for the correct forest rehabilitation and management.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.3
• /
• pp.189-199
• /
• 2014

The purpose of this study was to compare pflugbogen's biomechanical characteristics between on the ski simulator and snowed ski slope to develop interactive ski simulator. Nine ski instructors(sex: male, age: $29.6{\pm}5.4yrs$, height: $176.0{\pm}5.6cm$, body mass: $76.0{\pm}14.0kg$) belong to Korean Ski Instructors Association participated in this research. 24 Infrared cameras for snowed ski slope experiment and 13 infrared camera for ski simulator experiment were installed near by path of pflugbogen. The participants did pflugbogen on the snowed ski slope and the ski simulator both. During the experiment, the participants weared motion capture suit with infrared reflective makers on it, and plantar pressure sensors in ski boots, so that ski motion and plantar pressure data were collected together. Displacement of COG(center of gravity) movements, trunk flexion/extension angle, adduction/abduction angle, and plantar pressure data were significantly different between on the simulator and ski slope. However, percentage of time of COG movement in the phases during medial/lateral and anterior/posterior movement were not significantly different. Findings indicate that the difference between two groups occurred because the ski simulator's drive mechanism is different from ski motion on the slope. In order to develop the ski simulator more interactively for pflugbogen, the ski simulator's drive mechanism need to be reflected 3D motion data of pflugbogen on the slope that were purposed in this research.

• Journal of Computing Science and Engineering
• /
• v.7 no.2
• /
• pp.139-146
• /
• 2013

Recent advances in computer science enabled people with severe motor disabilities to use brain-computer interfaces (BCI) for communication, control, and even to restore their motor disabilities. This paper reviews the most recent works of BCI in stroke rehabilitation with a focus on methodology that reported on data collected from stroke patients and clinical studies that reported on the motor improvements of stroke patients. Both types of studies are important as the former advances the technology of BCI for stroke, and the latter demonstrates the clinical efficacy of BCI in stroke. Finally some challenges are discussed.

• Computers and Concrete
• /
• v.30 no.2
• /
• pp.113-126
• /
• 2022

Reinforced concrete bearing walls (RCBWs) are one of the most applicable structural systems. Therefore, vulnerability analysis and rehabilitation of the RCBW system are of great importance. In the present study, in order to the more precise investigation of the performance of this structural resistant system, pushover and nonlinear time history analyses based on several assumptions drawing upon experimental research were performed on several models with different stories. To validate the nonlinear analysis method, the analytical and experimental results are compared. Vulnerability evaluation was carried out on two seismic hazard levels and three performance levels. Eventually, the need for seismic rehabilitation with the basic safety objective (BSO) was investigated. The obtained results showed that the studied structures satisfied the BSO of the seismic rehabilitation guidelines. Consequently, according to the results of analyses and the desired performance, this structural system, despite its high structural weight and rigid connections and low flexibility, has integrated performance, and it can be a good option for earthquake-resistant constructions.

• Advances in Computational Design
• /
• v.8 no.2
• /
• pp.179-190
• /
• 2023

In this paper, building information modelling (BIM) associated to the principle of significant items emerged at quantities and costs in the optimization of productivity related to the rehabilitation of the building where proposed and discussed. A quantitative and qualitative study related to the field of application based on some parameters such as pathology diagnosis, projects documents and bills of quantities were used for model development at the preliminary stage of this work. The study identified 14 quantities significant items specified to cost value based on the use of the 80/20 Pareto rule, through the integration of building information modelling (BIM) in the optimisation of labour productivity for rehabilitation of buildings. The results of this study reveal the reliability and the improvement of labour productivity using building information modelling process integrating quantities and cost significant items.