• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.2
• /
• pp.125-133
• /
• 2005

Methodologies of NEWTRIT model, NRC model and AIRDOS-EPA model, which are off-site dose assessment models for regulatory compliance from routine releases of tritium into the environment, were investigated. Using the domestic data, if available, the predictive results of the models were compared. Among them, recently developed NEWTRIT model considers only doses from organically bounded tritium (OBT) due to environmental releases of tritiated water (HTO) . A total dose from all exposure pathways predicted from AIRDOS-EPA model was 1.03 and 2.46 times higher than that from NEWTRIT model and NRC model, respectively. From above result, readers should not have an understanding that a predictive dose from NRC model may be underestimated compared with a realistic dose. It is because of that both mathematical models and corresponding parameter values for regulatory compliance are based on the conservative assumptions. For a dose by food consumption predicted from NEWTRIT model, the contribution of OBT was nearly equivalent to that of HTO due to relatively high consumption of grains in Korean. Although a total dose predicted from NEWTRIT model is similar to that from AIRDOS-EPA model, NEIIfTRIT model may be have a meaning in the understanding of phenomena for the behavior of HTO released into the environment.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.464-473
• /
• 2005

Methodologies of NEWTRIT model, NRC model and AIRDOS-EPA model, which are off-site dose assessment models for regulatory compliance from routine releases of tritium into the environment, were investigated. Using the domestic data, if available, the predictive results of the models were compared. Among them, recently developed NEWTRIT model considers only doses from organically bounded tritium (OBT) due to environmental releases of tritiated water (HTO). A total dose from all exposure pathways predicted from AIRDOS-EPA model was 1.03 and 2.46 times higher than that from NEWTRIT model and NRC model, respectively. From above result, readers should not have an understanding that a predictive dose from NRC model may be underestimated compared with a realistic dose. It is because of that both mathematical models and corresponding parameter values for regulatory compliance are based on the conservative assumptions. For a dose by food consumption predicted from NEWTRIT model, the contribution of OBT was nearly equivalent to that of HTO due to relatively high consumption of grains in Korean. Although a total dose predicted from NEWTRIT model is similar to that from AIRDOS-EPA model, NEWTRIT model may be have a meaning in the understanding of phenomena for the behavior of HTO released into the environment.

• Journal of KIBIM
• /
• v.6 no.3
• /
• pp.1-14
• /
• 2016

The usage of Building Information Modelling (BIM) in building projects has enabled improvement in project planning, implementation and collaboration process amongst various stakeholders within architecture, engineering and construction (AEC) industry. However, variations exist in the current practices of BIM implementation and coordination process in the industry. These variations result in inconsistent degree of BIM use across the construction industry. This inconsistency gives rise to several managerial and technological challenges such as data interoperability issues and purposeful integration and exchange of information within the BIM components. In order to tackle the issue, it is essential to analyse the different BIM approaches employed by the industry practitioners. BIM guidelines serve as a critical link between the BIM model, and its subsequent execution. They therefore provide the best reflection of BIM application and processes. This research paper aims to address the variations existing in BIM practices across the construction industry. It includes an extensive study of 21 existing, publicly available BIM-based guidelines in order to establish an understanding of the present state of practice and deduce issues and concerns related to them. All guidelines analysed in this paper are first categorised based on authorship and the release date for efficient comparison. The points of similarity and difference between them are thereby realized and outlined. In addition, the transition of project implementation process from traditional methods to BIM technology is also explained. The existence of inconsistencies in the BIM guidelines reviewed in this paper reflects the need of a BIM 'Code Compliance Check'. The Code Compliance Check will serve as a regulatory project guideline that will further improve the potential of BIM by incorporating a consistent BIM modelling methodology for the entire construction industry.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.110-122
• /
• 2024

This study aims to cultivate specialized professionals equipped with practical skills essential for compliance with textile environmental regulations and analysis of harmful substances. This is achieved through the revision and restructuring of educational programs targeting workers in the chemical analysis industry. To address this, a survey was conducted among chemical industry workers in small and medium-sized enterprises (SMEs) to gauge the demand for educational programs. Specifically, a survey was conducted among 240 SME workers who participated in the 2022 education curriculum to identify their educational needs and specific requirements in the field. The research findings indicate that the majority of SMEs recognize the necessity of education in the chemical field and express a strong willingness to engage in the curriculum. Particularly emphasized was the need to enhance practical skills crucial for compliance with chemical environmental regulations. Consequently, adjustments were made to the curriculum, reallocating time and increasing the duration of practical training. This enables trainees to directly operate analysis machines and interpret results. Additionally, in response to further educational demands reflected by survey participants, the curriculum was expanded from five to six courses, with adjustments made to existing educational programs. Based on these research outcomes, practical educational methods tailored to SME requirements are proposed, aiming to bridge the gap between regulatory compliance and industry needs.

• Food Science and Industry
• /
• v.51 no.3
• /
• pp.174-184
• /
• 2018

The impact of regulations on industrial activities is significant. Because the food industry has to observe given obligations and bear costs and expenses resulted from complying with applicable food safety regulations. Meanwhile, A government drafts the regulatory impact analysis report prior to enactment, amendment or reinforcement of any regulations. The analysis powered by objective and scientific methodologies enable a government to judge whether a particular regulation will be good or bad for the society. An effective policy implementation in practice and cost-bearing is entirely up to industries. Moreover, opportunity cost and actual cost relating to or arising from regulatory compliance will be estimated only by the respective industries. Therefore, the food Industry needs to collect and accumulate the said information and also to disseminate their hardships and financial burdens. Objective and practical information will encourage a government to set out regulatory frameworks that rational policy making.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.15-22
• /
• 2016

The heat transport system transients of Wolsong 2,3,4 nuclear power plants were analysed during abnormal operating conditions. The compliance with requirements of AECB Regulatory Document R-77 for CANDU reactor was estimated. The analysis results showed that for each postulated accident the peak pressure values in the reactor headers are within the acceptance criteria given in ASME code requirements. The effect of LRV that is one of the overpressure protection device was very minor.

• Asian Journal of Business Environment
• /
• v.9 no.4
• /
• pp.29-34
• /
• 2019

Purpose - The purpose of the research is to assess the current state of cryptocurrency in Vietnam and to provide several solutions and recommendations to the Government, the State Bank of Vietnam (SBV) and other relevant agencies for monitoring, managing, and controlling cryptocurrency effectively and efficiently. Research design, data and methodology - The study is based on the assessment and analysis of cryptocurrency in the world and the real situation of cryptocurrency in Vietnam in order to provide solutions to the controllable development of operation of this currency. Results - The study indicates the current operations of cryptocurrency in Vietnam and provides several suggestions to effectively control this currency. Conclusion - According to the study on current cryptocurrency and the situation of cryptocurrency in Vietnam, the author has proposed a number of solutions to provide suggestions to manage and develop the operations of cryptocurrency in a most practical manner. The governments of many countries in the world, including the Government of Vietnam, need more time as well as appropriate technology improvements to take advantage of these new digital currencies; therefore, they still need to ensure safety in compliance with the control and regulatory capabilities of the central government and central banks.

• Nuclear Engineering and Technology
• /
• v.40 no.6
• /
• pp.511-516
• /
• 2008

Korea Hydro & Nuclear Power Co., Ltd. (KHNP) developed new IP-2 packages to transport low- and intermediate-level radioactive waste (LILW) steel drums from nuclear power plants to a disposal facility in accordance with IAEA and Korean transport regulations of radioactive material. Radiation shielding evaluation of the packages was carried out to demonstrate compliance with the regulatory requirements for IP-2 packages of radioactive material. Dose rate limits of LILW drums contained in the packages were determined.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.90-95
• /
• 2008

This article presents practical advice regarding the implementation and management of an impeccable Building Management System. The BMS was introduced to the series of computerized systems including manufacturing, storage, distribution, and quality control. Recently revised GMP regulation is requesting an improvement in drug product quality regulatory system by computer system validation. Quality is critical to guarantee the efficacy and the safety of drugs and is approved in the evaluation process after the audit trail application. HVAC parameter monitoring system will record the identity of operators entering or confirming critical data. Authority to amend entered data should be restricted to nominated persons. Any alteration to an entry of critical data should be authorized in advance and recorded with the reason for the change.

• Safety and Health at Work
• /
• v.9 no.4
• /
• pp.365-371
• /
• 2018

This article addresses three key issues. First, the commonalities, differences, strengths, and limitations of existing occupational safety and health (OSH) legislation of low- and middle-income countries were determined. Second, required revisions were identified and discussed to strengthen the laws in accordance with the best international practice. Finally, proposals for additional OSH laws and interventions were suggested. A literature search of OSH laws of 10 selected low- and middle-income countries was carried out. The laws were subjected to uniform review criteria. Although the agricultural sector employs more than 70% of the population, most of the reviewed countries lack OSH legislation on the sector. Existing OSH laws are gender insensitive, fragmented among various government departments, insufficient, outdated, and nondeterrent to perpetrators and lack incentives for compliance. Conclusively, the legal frameworks require reformation and harmonization for the collective benefit to employees, employers, and regulatory authorities. New OSH legislation for the agricultural sector is required.