• 한국측량학회지
• /
• 제9권2호
• /
• pp.139-149
• /
• 1991

일반적으로 수치표고모델은 데이타 획득의 자동화 및 관리가 용이한 격자망의 형태로 구성되어져 왔다. 그러나 격자형 수치표고모델은 일정한 간격으로 데이타를 추출하기 때문에 지형의 특성을 정확하고 상세하게 나타내기 위하여는 많은 데이타 용량을 필요로 한다. 본 연구는 격자형 수치표고모델로부터 지형을 대표할 수 있는 중심점을 추출함으로써 압축된 수치표고 모델을 구축하고자 하였다. 이를 위하여 지형의 중심점이 1차미분 연산자 및 라플라스 연산자에 의한 하이-패스 필터링에 의하여 추적되어 진다. 본 연구의 결과 압축된 수치표고모델을 구축하는데 있어서 라플라스 연산자가 1차미분 연산자보다 더 효과적인 하이-패스 필터임을 알 수 있었다.

• 한국농림기상학회지
• /
• 제6권3호
• /
• pp.149-163
• /
• 2004

Evapotranspiration (ET) is a critical component of the hydrologic cycle which influences economic activities as well as the natural ecosystem. While there have been numerous studies on ET estimation for homogeneous areas using point measurements of meteorological variables, monitoring of spatial ET has not been possible at landscape - or watershed - scales. We propose a site-specific application of the land surface model, which is enabled by spatially interpolated input data at the desired resolution. Gyunggi Province of South Korea was divided into a regular grid of 10 million cells with 30m spacing and hourly temperature, humidity, wind, precipitation and solar irradiance were estimated for each grid cell by spatial interpolation of synoptic weather data. Topoclimatology models were used to accommodate effects of topography in a spatial interpolation procedure, including cold air drainage on nocturnal temperature and solar irradiance on daytime temperature. Satellite remote sensing data were used to classify the vegetation type of each grid cell, and corresponding spatial attributes including soil texture, canopy structure, and phenological features were identified. All data were fed into a standalone version of SiB2(Simple Biosphere Model 2) to simulate latent heat flux at each grid cell. A computer program was written for data management in the cell - based SiB2 operation such as extracting input data for SiB2 from grid matrices and recombining the output data back to the grid format. ET estimates at selected grid cells were validated against the actual measurement of latent heat fluxes by eddy covariance measurement. We applied this system to obtain the spatial ET of the study area on a continuous basis for the 2001-2003 period. The results showed a strong feasibility of using spatial - data driven land surface models for operational monitoring of regional ET.

• 컴퓨터교육학회논문지
• /
• 제11권3호
• /
• pp.91-99
• /
• 2008

최근 무선 네트워크의 보급이 활성화 되고, 모바일 장치의 이용이 보편화되면서 모바일 장치의 자원을 그리드 컴퓨팅에 이용하는 모바일 그리드가 대두되었다. 그러나 모바일 환경은 무선네트워크의 불안정성이나 장치의 이동으로 인한 연결 끊김 등의 제약 사항이 있다. 모바일장치에 작업을 할당하는 스케줄링 기법은 모바일 장치의 제약사항을 극복하는데 초점을 둔다. 기존 모바일그리드의 스케줄링 기법은 모바일 장치의 통신 접속 시간에 초점을 두었다. 그런데 모바일장치의 통신 접속 시간은 학교의 수업/방학기간이나 주중/주말 같은 모바일장치 이용자의 생활환경에 따라서 일정한 이용 패턴이 나타난다. 따라서 본 논문에서는 모바일장치의 이용에 대한 통계를 통해 모바일장치의 이용패턴을 분석하였고, 도출된 이용패턴을 고려한 글로벌 스케줄링 기법과 로컬 스케줄링 기법을 제안하였다.

• 한국해양공학회지
• /
• 제17권4호
• /
• pp.1-7
• /
• 2003

A virtual reality technology for multipurpose numerical simulation is developed to reproduce and investigate a variety of ocean environmental problems in a 3D Numerical Wave Tank(NWT). The governing equations for solving incompressible fluid motion are Navier-Stokes equation and continuity equation. The Marker-Density function technique is adopted to implement the fully nonlinear freesurface kinematic condition. The marine environmental situations, i.e., waves, currents, etc., are reproduced by use of multi-segmented wavemakers on the basis of the so-called ″snake-principle″. In this paper, some numerical reproduction techniques for regular, and irregular waves, multi-directional waves, Bull's-eye wave. wave-current, and solitary wave are presented, and a model test in motion with large amplitude of roll angle is conducted in the developed 3D-NWT, using a overlaid grid system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.439-442
• /
• 2002

In this study, a turbulence simulation is carried out in a suction type wind tunnel using grids, where turbulent flows with various turbulence intensity are successfully produced by the change of grid size, arrangement of grids and settling position, respectively. Response tests of rectangular cylinder models with aspect ratio of 2 and 4 are carried out in smooth flow and generated turbulent flows. Additionally, two types of fairing are considered such as right triangle and regular triangle. The effects of wind velocity fluctuations and fairing are discussed on vortex-induced oscillation.

• KSTLE International Journal
• /
• 제10권1_2호
• /
• pp.27-32
• /
• 2009

In this study, fretting wear tests of nuclear fuel rods have been performed by using two kinds of spacer grid springs with a concave and a convex shape in room temperature dry and distilled water conditions. The objectives were to examine the variation of the wear mechanism with increasing fretting cycles and to evaluate the difference of the wear debris detachment behavior at each test environment. From the test results, the wear volume of each spring condition increased with increasing fretting cycles regardless of the test environments. However, the wear rate did not show a regular tendency and apparently changed with increasing fretting cycles. This is because the formation of the wear particle layer and/or the variation of the contact condition between the fuel rod and spring surfaces could affect a critical plastic deformation for detaching the wear debris. Based on the test results, the relationship between the wear behavior of each spring shape and test environment condition, and the variation of the surface characteristics are discussed in detail.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.78-85
• /
• 2011

The Vortex-In-Cell(VIC) method combined with panel method is applied to the analysis of incompressible unsteady viscous flow. The dynamics of resulting flow is governed by the vorticity transport equation in Lagrangian form with vortex particle representation of the flow field. A regular grid which is independent to the shape of a body is used for numerical evaluation based on immersed boundary technique. With an introduction of this approach, the development and validation of the VIC method is presented with some computational results for incompressible viscous flow around two or three dimensional bodies such as wing section, sphere, finite wing and marine propeller.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1997년도 추계 학술대회논문집
• /
• pp.49-54
• /
• 1997

Rice's monotone streamline upwind finite element method, which was proposed to treat convection-dominated flows, is applied to the linear triangular element. An alignment technique of unstructured grids with given velocity fields is used to prevent the interpolation error produced in evaluating the convection term in the upwind method. The alignment of grids is accomplished by optimizing a target function defined with the inner-product of a properly chosen side vector in the element with the velocity field. Two pure advection problems are considered to demonstrate the superiorities of the present approach in solving the convection-dominated flow on the unstructured grid. Solutions obtained with aligned grids are much closer to the exact solutions than those with initial regular grids. The capability of the present approach in predicting the appearance of the secondary vortex in the laminar confined jet impingement is shown by comparing streamlines to those produced by SIMPLE on a highly stretched grid toward the impingement plate.

• 한국정보통신학회논문지
• /
• 제8권4호
• /
• pp.955-959
• /
• 2004

공간 데이터 마이닝을 위한 기존의 클러스터링 기법들은 점 객체만을 대상으로 한다. 즉, 선이나 면 같은 다양한 공간 객체들을 지원하지 못한다. 이것은 클러스터링 과정에서 객체들 간의 거리 계산에 있어서, 점 객체는 용이하지만 선과 면인 경우에는 어렵기 때문이다. 본 논문에서는 이러한 문제점을 해결하기 위하여 균등 격자를 이용한 클러스터링 기법을 설계한다. 세부적으로 이 기법에서는 다각형 객체들 간의 거리 계산을 균등 격자를 이용하여 단순화시킴으로서 거리 계산에 따른 시간과 비용을 줄일 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.374-377
• /
• 2004

공간 데이터 마이닝을 위한 기존의 클러스터링 기법들은 점 객체만을 대상으로 한다. 즉, 선이나면 같은 다양한 공간 객체들을 지원하지 못한다. 이것은 클러스터링 과정에서 객체들 간의 거리 계산에 있어서, 점 객체는 용이하지만, 선과 면인 경우에는 어렵기 때문이다. 본 논문에서는 이러한 문제점을 해결하기 위하여 균등 격자를 이용한 클러스터링 기법을 설계한다. 세부적으로 이 기법에서는 다각형 객체들 간의 거리 계산을 균등 격자를 이용하여 단순화시킴으로서 거리 계산에 따른 시간과 비용을 줄일 수 있다.