• 한국농공학회논문집
• /
• 제46권5호
• /
• pp.15-26
• /
• 2004

This study was conducted to derive the regional design rainfall by the regional frequency analysis based on the regionalization of the precipitation. The optimal regionalization of the precipitation data were classified by the above mentioned regionalization for all over the regions except Jeju and Ulleung islands in Korea. Design rainfalls following the consecutive duration were derived by the regional analysis using the observed and simulated data resulted from Monte Carlo techniques. Relative root mean square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE for the design rainfall were computed and compared between the regional and at-site frequency analysis. It has shown that the regional frequency analysis procedure can substantially more reduce the RRMSE, RBIAS and RR in RRMSE than those of at-site analysis in the prediction of design rainfall. Consequently, optimal design rainfalls following the classified regions and consecutive durations were derived by the regional frequency analysis using Generalized extreme value distribution which was identified to be more optimal one than the other applied distributions. Diagrams for the design rainfall derived by the regional frequency analysis using L-moments were drawn according to the regions and consecutive durations by GIS techniques.

• Water Engineering Research
• /
• 제1권1호
• /
• pp.11-23
• /
• 2000

Regional flood frequency analysis has been developed by employing the nearby site's information to improve a precision in estimating flood quantiles at the site of interest. In this paper, single site and regional flood frequency analyses were compared based of the 2-parameter Weibull model. For regional analysis, two approaches were employed. The First one is to use the asymptotic variances of the quantile estimators derived based of the assumption that all sites including the site of interest are independent each other. This approach may give the maximum regional gain due to the spatial independence assumption among sites. The second one in Hosking's regional L-moment algorithm. These methods were applied to annual flood data. As the results, both methods generally showed the regional gain at the site of interest depending on grouping the sites as homogeneous. And asymptotic formula generally shows smaller variance than those from Hosking's algorithm. If the shape parameter of the site of interest from single site analysis is quite different from that from regional analysis then Hosking's results might be better than the asymptotic ones because the formula was derived based on the assumption that all sites have the same regional shape parameter. Furthermore, in such a case, regional analysis might be worse than single site analysis in the sense of precision of flood quantile estimation. Even though the selected sites may satisfy Hosking's criteria, regional analysis may not give a regional gain for specific and nonexceedance probabilities.

• 한국수자원학회논문집
• /
• 제51권9호
• /
• pp.747-759
• /
• 2018

다변량 빈도해석과 지역빈도해석의 장점을 동시에 가지는 다변량 지역빈도해석은 다양한 변수를 고려함으로써 수문 현상에 대하여 많은 정보를 얻을 수 있고 많은 가용 자료 수로 인하여 높은 정확도의 분석결과를 도출할 수 있다. 현재까지는 우리나라의 강우 자료를 이용하여 다변량 지역빈도해석이 시도된 적이 없어 국내의 강우 자료를 대상으로 다변량 지역빈도해석의 적용성을 검토할 필요가 있다. 본 연구에서는 다변량 지역빈도해석의 매개변수 추정, 최적 분포형 선정, 확률수문량 성장곡선 추정 등에 집중하여 이변량 수문자료인 연 최대 강우량-지속기간 자료에 대하여 이변량 지역빈도해석의 적용성을 평가하였다. 기상청 71개 지점에 대하여 분석을 실시하였다. 본 연구를 통해 적용된 지역강우자료의 최적 copula 모형으로는 Frank와 Gumbel copula 모형이 선택되었고 주변분포형에 대해서는 지역별로 Gumbel과 대수정규분포와 같은 다양한 분포형이 최적 분포형으로 선택되었다. 상대제곱근오차(relative root mean square error)를 기준으로 지역빈도해석이 지점빈도해석보다 안정적이고 정확한 확률수문량 곡선 추정을 하였다. 이변량 강우분석에서 지역빈도해석을 적용하면 안정적인 수공구조물 설계기준 제시와 강우-지속기간 관계를 모형화 할 수 있을 것으로 기대된다.

• 한국농공학회지
• /
• 제44권5호
• /
• pp.41-53
• /
• 2002

This study was conducted to derive the regional design rainfall by the regional frequency analysis based on the regionalization of the precipitation suggested by the first report of this project. According to the regions and consecutive durations, optimal design rainfalls were derived by the regional frequency analysis for L-moment in the second report of this project. Using the LH-moment ratios and Kolmogorov-Smirnov test, the optimal regional probability distribution was identified to be the Generalized extreme value (GEV) distribution among applied distributions. regional and at-site parameters of the GEV distribution were estimated by the linear combination of the higher probability weighted moments, LH-moment. Design rainfall using LH-moments following the consecutive duration were derived by the regional and at-site analysis using the observed and simulated data resulted from Monte Carlo techniques. Relative root-mean-square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE for the design rainfall were computed and compared in the regional and at-site frequency analysis. Consequently, it was shown that the regional analysis can substantially more reduce the RRMSE, RBIAS and RR in RRMSE than at-site analysis in the prediction of design rainfall. Relative efficiency (RE) for an optimal order of L-moments was also computed by the methods of L, L1, L2, L3 and L4-moments for GEV distribution. It was found that the method of L-moments is more effective than the others for getting optimal design rainfall according to the regions and consecutive durations in the regional frequency analysis. Diagrams for the design rainfall derived by the regional frequency analysis using L-moments were drawn according to the regions and consecutive durations by GIS techniques.

• 한국수자원학회논문집
• /
• 제34권2호
• /
• pp.119-130
• /
• 2001

본 연구에서는 한강유역의 1일, 2일, 3일 연최대강우자료를 대상으로 L-모멘트법을 이용한 지점 빈도해석과 지역 빈도해석을 실시하여 그 결과를 비교하였다. 지역빈도해석을 실시하기 위하여 한강유역을 남한강, 북한강, 한강하류부 유역의 3개 소유역으로 분할하고, 각 유역에 대한 자료의 이산도 및 동질성을 검토하였으며, 각 소유역에 대하여 여러 분포형을 적용한 결과, 남한강유역과 한강하류부 유역은 lognormal 분포형, 북한강 유역은 gamma-3 분포형이 적정분포형으로 선정되었다. 지역빈도해석과 지점빈도해석을 통하여 선정된 확률분포형을 이용, Monte Carlo 모의를 수행하였으며, 재현기간에 따른 상대편의와 상대제곱근 오차를 산정하였다. 지역빈도해석과 지점빈도해석을 비교한 결과 상대제곱근오차에 있어서 지역빈도해석을 수행한 경우가 지점빈도해석에 비해 그 결과가 우수하였으며, 재현기간이 커질수록 그 차이는 현저하게 나타났다. 따라서, 한강유역의 강우량에 대해서 지역빈도해석 수행함이 지점빈도해석에 비해 우수하다는 결론을 얻게 되었다.

• 한국농공학회논문집
• /
• 제46권5호
• /
• pp.27-39
• /
• 2004

In the first part of this study, five homogeneous regions in view of topographical and geographically homogeneous aspects except Jeju and Ulreung islands in Korea were accomplished by K-means clustering method. A total of 57 rain gauges were used for the regional frequency analysis with minimum rainfall series for the consecutive durations. Generalized Extreme Value distribution was confirmed as an optimal one among applied distributions. Drought rainfalls following the return periods were estimated by at-site and regional frequency analysis using L-moments method. It was confirmed that the design drought rainfalls estimated by the regional frequency analysis were shown to be more appropriate than those by the at-site frequency analysis. In the second part of this study, LH-moment ratio diagram and the Kolmogorov-Smirnov test on the Gumbel (GUM), Generalized Extreme Value (GEV), Generalized Logistic (GLO) and Generalized Pareto (GPA) distributions were accomplished to get optimal probability distribution. Design drought rainfalls were estimated by both at-site and regional frequency analysis using LH-moments and GEV distribution, which was confirmed as an optimal one among applied distributions. Design rainfalls were estimated by at-site and regional frequency analysis using LH-moments, the observed and simulated data resulted from Monte Carlotechniques. Design drought rainfalls derived by regional frequency analysis using L1, L2, L3 and L4-moments (LH-moments) method have shown higher reliability than those of at-site frequency analysis in view of RRMSE (Relative Root-Mean-Square Error), RBIAS (Relative Bias) and RR (Relative Reduction) for the estimated design drought rainfalls. Relative efficiency were calculated for the judgment of relative merits and demerits for the design drought rainfalls derived by regional frequency analysis using L-moments and L1, L2, L3 and L4-moments applied in the first report and second report of this study, respectively. Consequently, design drought rainfalls derived by regional frequency analysis using L-moments were shown as more reliable than those using LH-moments. Finally, design drought rainfalls for the classified five homogeneous regions following the various consecutive durations were derived by regional frequency analysis using L-moments, which was confirmed as a more reliable method through this study. Maps for the design drought rainfalls for the classified five homogeneous regions following the various consecutive durations were accomplished by the method of inverse distance weight and Arc-View, which is one of GIS techniques.

• 한국수자원학회논문집
• /
• 제39권10호
• /
• pp.891-904
• /
• 2006

합리적인 수공구조물의 설계를 위해서 확률강우량의 산정은 필수적이며, 확률 강우량을 산정하는 기법은 크게 지점빈도해석과 지역빈도해석으로 구분 지을 수 있다 이 중에서 지역빈도해석은 지점의 부족한 강우자료를 보완하기 위해서 L-모멘트로 확률분포형의 매개변수를 추정하고, 강우 계열의 동질성이 검정된 자료를 빈도분석하여 확률 강우량을 결정하는 기법이다. 이와 같은 지역빈도해석 기법은 매개변수를 선형조합하여 확률분포형의 종류와 크기 및 형상을 결정하여 확률 강우량을 산정하게 된다. 여기서 각 지점별 강우 자료들이 동질성 검정을 통과하였다 하더라도 지점별로 최적의 분포형이 다를 수 있으나, 부족한 강우자료를 보완하기 위해서 동일한 분포형을 따르는 것으로 가정하고 빈도해석을 수행하게 된다. 그러므로 지역빈도해석기법은 확률 분포형을 가정하고 강우자료를 적용하는 과정에서 기존에 매개변수적 빈도해석의 약점을 갖게 된다 따라서 본 연구에서는 변동핵밀도 함수를 동질성이 확보된 강우자료에 적용하여 빈도해석을 수행함으로써 기존의 빈도해석이 가지는 약점을 극복하고자 하였다. 본 연구에서는 기상청에서 관리하는 16개 강우관측소의 강우자료를 수집하여 매년최대 연강우량 계열을 구성해 지점빈도해석과 지역빈도해석을 수행하였다. 지점빈도해석은 매개변수적 기법과 비매개변수적 기법을 모두 적용하였으며, 지역빈도채석은 Index Flood 기법과 L-모멘트 기법을 적용하였다. 또한 변동핵밀도함수를 지역빈도해석에 적용하였으며, 각 기법별로 산정된 확률강우량을 비교 분석하였다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.475-478
• /
• 2003

This study was conducted to compare the design rainfall derived by the at-site and regional frequency analysis based on the regionalization of the precipitation. The regional and at-site design rainfalls were calculated by Log-Pearson type III distribution using Indirect Methods of Moments(WRC). The regional and at-site analysis for the design rainfall were tested by Monte Carlo simulation. Relative root-mean-square error(RRMSE), Relative bias(RBIAS) and Relative reduction(RR) in RRMSE were computed and compared between design rainfalls resulted from observed and simulated data using the regional and at-site analysis. It was shown that the regional analysis procedure can substantially reduce the RRMSE, RBIAS in comparison with those of at-site analysis. Consequently, optimal design rainfalls following the regions and consecutive durations were derived by the regional frequency analysis.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.593-598
• /
• 2005

At-site analysis is not appropriate if the record length is shorter than target return period T. If the record length is longer than 27 years, then at-site analysis may be sufficient(Institute of Hydrology, 1999). However, in such a case, regional frequency analysis is recommended for purpose of comparison. Record lengths of annual maximum rainfall data in Korea are usually shorter than 50 years. It is therefore essential to apply regional frequency analysis for estimating rainfall quantiles of more than 100 years return period. In this research, regional rainfall frequency analysis is performed for hourly rainfall data of South Korea. Homogeneous regions are idntified by clusgter analysis which is a standard method of statistical multivariate analysis for dividing a data set into groups. An appropriate distribution is chosen by goodness-of-fit test. GLO is found to be an appropriate distribution as a result of goodness-of-fit measure (Hosking & Wallis, 1997). Simulation experiments are performed to check the performance of frequency analysis techniques. The effects of discordant sites on quantiles are considered.

• 대한토목학회논문집
• /
• 제28권2B호
• /
• pp.225-236
• /
• 2008

수공구조물의 설계를 위한 확률강우량의 산정방법은 크게 지점빈도해석과 지역빈도해석으로 구분된다. 일반적으로 확률강우량은 대상유역에 위치하는 강우관측소에서 관측된 강우량자료를 지점빈도해석으로 추정하게 된다. 지점빈도해석을 통한 확률강우량을 산정하기 위해서는 충분한 기간 동안의 관측된 강우량자료의 확보가 필수적이라 할 수 있으나 관측자료의 부족으로 인해 매개변수의 편의가 발생할 수 있다. 따라서 부족한 강우자료를 보완하고 안정적인 확률강우량을 산정하기 위한 방안으로 지역빈도해석이 추천되어지고 있다. 따라서 본 연구에서는 우리나라 강우관측소의 위치 및 시간강우량 특성을 이용한 군집분석을 수행하여 강우관측소를 군집화 하였다. 군집화 된 강우관측소를 대상으로 L-moment 법을 통해 산정한 매개변수를 이용하여 각각의 지역별로 불일치성 및 이질성 검정을 통한 지역구분을 수행하여 우리나라 강우관측소를 6개 지역으로 구분하였다. 구분된 지역별로 L-moment 법, 지수홍수법 및 변동핵밀도함수를 적용한 지역빈도해석을 수행하여 각각 확률강우량을 산정하여 비교하였다. 분석결과에서 변동핵밀도함수를 이용한 지역빈도해석은 다른 기법에서 적합한 확률분포형 결정이 어려운 경우 등에 충분히 활용할 수 있는 것으로 나타났다.