• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.578-586
• /
• 2019

The purpose of this study was to investigate the change of spatial distribution of Korean red pine (Pinus densiflora Siebold & Zucc.) in Hallasan National Park by surveying the distribution and crown density and analyzing by the elevation, slope, orientation, and regional habitat in 2006 and 2015. The total area of the Korean red pine forest was 1,259.9 ha in 2015, which increased by 51.4 ha, or 4.1%, compared to 1,208.5 ha in 2006. For the past 10 years, the area of sparse density with crown density of 11% to 40% of Korean red pine increased by 59.8 ha, the area of moderate density with crown density of 41% to 70% increased by 59.0 ha, and the area of dense density with 71% or more crown density increased by 67.3 ha. In terms of the altitude above sea level, the Korean red pine forest area between 1,010 m and 1,400 m was the largest at 1,003.0 ha or 79.6% of the total area in 2015. The area between 1,100 m and 1,300 m increased, and the area of dense density decreased significantly while the areas of moderate density and sparse density increase. There was no notable change according to the land slope, and the area increased from 2006 regardless of the slope. By direction, 56.4% were distributed in the southwest and southeast directions centered on the south-facing slope with the increase of 27.8 ha over the 10 years while the northwest and northeast directions centered on the north-facing slope decreased by 7.6 ha. Regarding the distribution change of the Korean red pine forest by the region, the Yeongsil area showed an increase of 25.5 ha, or 49.6% of the total area increase, in 2006 while the Ibseog-oreum area including the right side on the Sanbeoleum mountain valley increased by 20.4 ha. The distribution in the Gaemideung area that includes Jogeundeule increased by 7.4 ha while that of Sogbat in Sungpanak Trail decreased by 1.9 ha. This study analyzed the changes in the distribution area and crown density of the Korean red pine forest according to the altitude, slope, direction, and regional habitat in Hallasan National Park. The expansion of Korean red pine forest distribution was limited to the areas where the grass and the shrub was the dominating vegetation structure, or the forest gap was created by the disturbance. On the other hand, the distribution area of the Korean red pine forest surrounded by deciduous broad-leaved forests or mixed vegetation structure is considered to result from the change in density more than the area due to competition with deciduous broad-leaved trees.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.411-419
• /
• 2019

The purpose of this study was to analyze the growth and functional differences between C. rotundus and G. littoralis according to different electrical conductivity (EC) conditions in reclaimed soil conditions. C. rotundus and G. littoralis seeds were sown in a tray and managed for seedlings stage for eight weeks. They were transplanted in the pots containing reclaimed soils sampled in the Saemangum region. The plants were grown in the reclaimed land soil for 12 weeks under the control, 1, 2, 4, and $8dS{\cdot}m^{-1}$ conditions and in horticultural soils with EC $1.0dS{\cdot}m^{-1}$. Plant height, leaf length and width of C. rotundus were the highest in EC $1dS{\cdot}m^{-1}$. Leaf, flower and tuber numbers of C. rotundus were the highest in EC $2dS{\cdot}m^{-1}$ and the lowest in EC $8dS{\cdot}m^{-1}$, and SPAD was the highest in EC 2 and $4dS{\cdot}m^{-1}$ and the lowest in EC $8dS{\cdot}m^{-1}$. The fresh weights of shoot and root of C. rotundus grown under EC $2dS{\cdot}m^{-1}$ increased and then decreased as the concentration increased. When compared plant growth between reclaimed soil and horticulture soil with EC $1dS{\cdot}m^{-1}$, the fresh weights of shoot and root, SPAD, leaf number, flower number, and tuber number were higher in horticultural soils. Although G. littoralis grown under EC $8dS{\cdot}m^{-1}$ was the lowest in all growth parameters, there were no significant differences among other EC treatments. C. rotundus had the highest p-coumaric acid content in EC $1dS{\cdot}m^{-1}$. And the catechin content in shoot of G. littoralis was the highest in the control, and root of Glehnia littoralis had the highest benzoic acid contents in EC $1dS{\cdot}m^{-1}$. If the soil EC is well managed within $4.0dS{\cdot}m^{-1}$, two plants would be cultivated in reclaimed land.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.729-742
• /
• 2020

In this study, we analyze seabottom conditions and characteristics integrated with topographic data, seafloor mosaic, underwater images and orthophoto(drone) of soft-hard bottom area around the Sib-Ri rock in the northern shore of the East Sea(Gyeongpo Beach, Gangneung). We obtained field survey data around the Sib-Ri rock(about 600 m × 600 m). The Sib-Ri rock is formed by two exposed rocks and surrounding reef. The artificial reef zone made by about 200 ~ 300 structures is shown the western area of the Sib-Ri rock. The underwater rock region is extended from the southwestern area of the exposed the Sib-Ri rock with 9 ~ 11 m depth range. The most broad rocky seabottom area is located in the southwestren area of the Sib-Ri rock with 10 ~ 13 m depth range. The study area were classified into 4 types of seabottom environment based on the analysis of bathymetric data, seafloor mosaics, composition of sediments and images(underwater and drone). The underwater rock zones(Type I) are the most distributed area around the Sib-Ri Rock(about 600 m × 600 m). The soft seabottom area made by sediments layer showed 2 types(Type II: gS(gravelly Sand), Type III: S(Sand)) in the areas between underwater rock zones and western part of the Sib-Ri rock(toward Gyeongpo Beach). The artificial reef zone with a lot of structures is located in the western part of the Sib-Ri rock. Marine algae(about 6 species), Phylum porifera(about 2 species), Phylum echinodermata(about 3 species), Phylum mollusca(about 3 species) and Phylum chordata(about 2 species) are dominant faunal group of underwater image analysis area(about 10 m × 10 m) in the northwestern part of the Sib-Ri rock. The habitat of Phylym mollusca(Lottia dorsuosa, Septifer virgatus) and Phylum arthropoda(Pollicipes mitella, Chthamalus challengeri hoek) appears in the intertidal zone of the Sib-Ri rock. And it is possible to estimate the range and distribution of the habitat based on the integrated study of orthphoto(drone) and bathymetry data. The integrated visualization and mapping techniques using seafloor mosaic images, sediments analysis, underwater images, orthophoto(drone) and topographic data can provide and contribute to figure out the seabottom conditions and characteristics in the shore of the East Sea.

• Journal of Life Science
• /
• v.31 no.3
• /
• pp.257-265
• /
• 2021

Heterotrimeric kinesin-2 is a molecular motor protein of the kinesin superfamily (KIF) that moves along a microtubule plus-end directed motor protein. It consists of three different motor subunits (KIF3A, KIF3B, and KIF3C) and a kinesin-associated protein 3 (KAP3) that form a heterotrimeric complex. Heterotrimeric kinesin-2 interacts with many different binding proteins through the cargo-binding domain of the KIF3s. The activity of heterotrimeric kinesin-2 is regulated to ensure that the cargo is directed to the right place at the right time. How this regulation occurs, however, remains in question. To identify the regulatory proteins for heterotrimeric kinesin-2, we performed yeast two-hybrid screening and found a specific interaction with creatine kinase B (CKB), which is the brain isoform of cytosolic creatine kinase enzyme. CKB bound to the cargo-binding domain of KIF3A but did not interact with the KIF3B, KIF5B, or KAP3 in the yeast two-hybrid assay. The carboxyl (C)-terminal region of CKB is essential for the interaction with KIF3A. Another protein kinase, CaMKIIa, interacted with KIF3A, but GSK3a did not interact with KIF3A in the yeast two-hybrid assay. KIF3A interacted with GST-CKB-C but not with GSK-CKB-N or GST alone. When co-expressed in HEK-293T cells, CKB co-localized with KIF3A and co-immunoprecipitated with KIF3A and KIF3B but not KIF5B. These results suggest that the CKB-KIF3A interaction may regulate the cargo transport of heterotrimeric kinesin-2 under energy-compromised conditions in cells.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.31-39
• /
• 2020

Purpose: The aims of this study were to compare the superficial dose with Optically Stimulated Luminescence Dosimeter(OSLD) measurement and Treatment Planning System(TPS) calculation for 6MV-Flattening Filter Free(FFF) energy using HalcyonTM and TrueBeamTM. Materials and methods: Phantom study was performed using the CT images of human phantom. In the treatment planning system, the Planning Target Volume(PTV) was contoured which is similar to Glottic cancer. Furthermore, Point(M), Point(R), and Point(L) were contoured at the iso-center of head and neck region and 5mm bolus was applied to the body contour. Each treatment plans using 6MV-FFF energy from HalcyonTM and TrueBeamTM with static Intensity Modulated Radiation Therapy(IMRT) and Volumetric Modulated Arc Therapy(VMAT) were established with eclipse. To reproduce the same position as the TPS, OSLDs were placed at the iso-center point and 5mm bolus was applied to compare the error rate after the dose delivery. Result: The results of the study using human phantom are as follows. In case of HalcyonTM, the mean absolute error rates of the point dose using the treatment planning system and the dose measured by OSLD were 1.7%±1.2% for VMAT and 4.0±2.8% for IMRT. Also TrueBeamTM was identified as 2.4±0.4% and 8.6±1.8% respectively for VMAT and IMRT. Conclusion: Through the results of this study, TrueBeamTM confirmed that the average error rate was 2.4 times higher for VMAT and 3.6 times higher for IMRT than HalcyonTM. Therefore, based on the results of this study, If we need a more accurate dose assessment for the superficial dose, It is expected that using HalcyonTM would be better than TrueBeamTM.

• Research in Plant Disease
• /
• v.26 no.4
• /
• pp.264-271
• /
• 2020

We have developed a simultaneous diagnostic method that can identify both the species of thrips and tomato spotted wilt virus (TSWV) that are problematic in chrysanthemum plants. This is a method of amplifying DNA by performing reverse transcription-polymerase chain reaction by simultaneously adding primers specific to TSWV coat protein (N) gene and primers specific to the internal transcribed spacer 2 region of Frankliniella occidentalis and F. intonsa using total nucleic acid extracted from one thrips. The sizes of DNA fragments for TSWV, F. occidentalis, and F. intonsa were 777, 287, and 367 bp, respectively. These results showed species identification of thrips and whether thrips carrying TSWV can be simultaneously confirmed. Further usefulness of the simultaneous diagnostic method was made from greenhouse survey at chrysanthemum greenhouses in Taean (Chungcheongnam-do) and Changwon (Gyeongsangnam-do) to investigate the identification of thrips species and the rate of thrips carrying TSWV. Of thrips collected from the greenhouses, 83.7% thrips was F. occidentalis and 72.9% F. occidentalis carried TSWV in Taean. Similarly, the diagnostic method showed that 92.2% thrips was F. occidentalis and 84.0% F. occidentalis carried TSWV in Changwon. These results confirm that F. occidentalis is a dominant thrips species and the thrips species plays a crucial role in the transmission of TSWV in chrysanthemum plants in the greenhouses. Taken together, this study showed a simple diagnostic method for thrips identification and epidemiological studies of the timing and spread of TSWV through thrips in chrysanthemum greenhouses in South Korea.

• Korean Journal of Environment and Ecology
• /
• v.34 no.6
• /
• pp.589-600
• /
• 2020

Effective conservation and management of protected areas require monitoring the settlement of invasive alien species and reducing their dispersion capacity. We simulated the potential distribution of invasive alien plant species (IAPS) using three representative species distribution models (Bioclim, GLM, and MaxEnt) based on the IAPS distribution in the forest genetic resource reserve (2,274ha) in Uljin-gun, Korea. We then selected the realistic and suitable species distribution model that reflects the local region and ecological management characteristics based on the simulation results. The simulation predicted the tendency of the IAPS distributed along the linear landscape elements, such as roads, and including some forest harvested area. The statistical comparison of the prediction and accuracy of each model tested in this study showed that the GLM and MaxEnt models generally had high performance and accuracy compared to the Bioclim model. The Bioclim model calculated the largest potential distribution area, followed by GLM and MaxEnt in that order. The Phenomenological review of the simulation results showed that the sample size more significantly affected the GLM and Bioclim models, while the MaxEnt model was the most consistent regardless of the sample size. The optimal model overall for predicting the distribution of IAPS among the three models was the MaxEnt model. The model selection approach based on detailed flora distribution data presented in this study is expected to be useful for efficiently managing the conservation areas and identifying the realistic and precise species distribution model reflecting local characteristics.

• Korean Journal of Environment and Ecology
• /
• v.34 no.6
• /
• pp.503-514
• /
• 2020

Climate change leads to changes in phenological response and movement of plant habitats. Korea's evergreen broad-leaved forest has widened its distribution area compared for the past 20 years, and the range of its native habitats is moving northward. We analyzed climate indices such as the warmth index, the cold index, the lowest temperature in the coldest month, and the annual average temperature, which are closely related to vegetation distribution, to predict the change in the native habitat of Lauraceae evergreen broad-leaved trees. We also analyzed the change and spatial distribution to identify the habitat climate characteristics of 8 species of Lauraceae evergreen broad-leaved trees distributed in the warm temperate zone in Korea. Moreover, we predicted the natural habitat change in the 21st century according to the climate change scenario (RCP 4.5/8.5), applying the MaxEnt species distribution model. The monthly average climate index of the 8 species of Lauraceae evergreen broad-leaved trees was 116.9±10.8℃ for the temperate index, the cold index 3.9±3.8℃, 1495.7±455.4mm for the annual precipitation, 11.7±3.5 for the humidity index, 14.4±1.1℃ for the annual average temperature, and 1.0±2.1℃ for the lowest temperature of winter. Based on the climate change scenario RCP 4.5, the distribution of the Lauraceae evergreen broad-leaved trees was analyzed to expand to islands of Jeollanam-do and Gyeongsangnam-do, adjacent areas of the west and south coasts, and Goseong, Gangwon-do on the east coast. In the case of the distribution based on the climate change scenario RCP 8.5, it was analyzed that the distribution would expand to all of Jeollanam-do and Gyeongsangnam-do, and most regions except for some parts of Jeollabuk-do, Chungcheongnam-do, Gyeongsangbuk-do, and the capital region. For the conservation of Lauraceae evergreen broad-leaved trees to prepare for climate change, it is necessary to establish standards for conservation plans such as in-situ and ex-situ conservation and analyze various physical and chemical characteristics of native habitats. Moreover, it is necessary to preemptively detect changes such as distribution, migration, and decline of Lauraceae evergreen broad-leaved trees following climate change based on phenological response data based on climate indicators and establish conservation management plans.

• Journal of Korea Foundry Society
• /
• v.41 no.2
• /
• pp.144-152
• /
• 2021

Based on the analysis of the current state of the world's foundry industry, we looked at the international competitiveness of Korea's foundry industry for the past 20 years. Korea's total foundry production is 2.52 million tons, and the production per company (so-called productivity) is 2,831 tons, which is the eighth largest in the world and down one position for the case of total foundry production, while productivity remains its position compared to three years ago. Korea is the only one of the top 10 foundry to see a decline in production. Similar to the global situation, Korean products consist of 38% of grey csat iron, 31% of ductile cast iron, 15% of aluminum, and 9% of cast steel. In order to obtain statistics on Korea's foundry industry, the survey conducted a service project for approximately nine months from April 2020. Various statistical surveys and sample in-depth surveys by the Korean standard industry class were evaluated for various contents of the domestic casting industry. We also looked at the number of companies, the distribution by region, the number of workers and the percentage of foreigners, and the distribution of each job, as well as the R&D investment status according to the size of the enterprise. Together, sales, exports, sales and various profit ratios were analyzed to measure the earning power of foundry industry. In addition, the classification by grouping the foundry industry according to the process utilized by focusing on each company, and to determine the sales, exports, and yield status for each process was also investigated on the basis. Based on these data, the domestic foundry industry has presented a variety of offers for the following issues for sustainable growth; global ranking, marginal corporate restructuring, training of domestic technical people, differentiated support policies by company size and process.

• Atmosphere
• /
• v.31 no.2
• /
• pp.229-240
• /
• 2021

The Global Ocean Data Assimilation and Prediction System (GODAPS) in operation at the KMA (Korea Meteorological Administration) is introduced. GODAPS consists of ocean model, ice model, and 3-d variational ocean data assimilation system. GODAPS assimilates conventional and satellite observations for sea surface temperature and height, observations of sea-ice concentration, as well as temperature and salinity profiles for the ocean using a 24-hour data assimilation window. It finally produces ocean analysis fields with a resolution of 0.25 ORCA (tripolar) grid and 75-layer in depth. This analysis is used for providing a boundary condition for the atmospheric model of the KMA Global Seasonal Forecasting System version 5 (GloSea5) in addition to monitoring on the global ocean and ice. For the purpose of evaluating the quality of ocean analysis produced by GODAPS, a one-year data assimilation experiment was performed. Assimilation of global observing system in GODAPS results in producing improved analysis and forecast fields with reduced error in terms of RMSE of innovation and analysis increment. In addition, comparison with an unassimilated experiment shows a mostly positive impact, especially over the region with large oceanic variability.