• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.634-643
• /
• 2011

The neutral section was installed in order to prevent conflict with different phase angle source in electric railway catenary system. The speed of electric train reduced due to coasting operation by notch off when it passed the neutral section. And, the catenary wire was damaged and the accident might be happened because of the arc generation when the electric train passed the neutral section with notch off condition. The inrush current of main transformer installed tiling train is analyzed during the operation of MCB(main circuit break) passing through the neutral section. The instantaneous waveform of load current were analyzed in case of powering and regenerative braking. Inrush current waveform with run of AC railway train showed that inrush current waveform and harmonics, the inrush current generated from main transformer in train has bad effects on power quality problem. In order to reduce these inrush currents, the MCB is connected when the phase angle of voltage is 90 degree. This paper is to measure inrush current and harmonics in main transformer of high speed train in neutral section of electric railway. This measurement report is used to control minimum inrush current in algorithm and power phase angle.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.872-875
• /
• 2003

This paper introduces the propulsion system for Korean High Speed Railway(HSR). The developed propulsion system consists of PWM AC/DC converter and inverter. Compared with TGV-K, converters can improve input harmonics characteristics by the interlaced PW switching methods. And several merits such as unity power factor and simple regenerative operations can be also made. As a main power component, IGCT stack with suitable structure for high speed train and environmentally friendly cooling heat pipe is designed. In this paper, overall configuration of controller and control scheme is briefly described. Finally running tests are made to verify the developed propulsion system. The presented test results shows fast torque response, balanced converter current sharing, and appropriate running sequence.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.756-759
• /
• 2014

DC/DC converters are commonly used to generate regulated DC output voltages with high-power efficiencies from different DC input sources. The converters can be applied in the regenerative braking of DC motors to return energy back to the supply, resulting in energy savings for the systems at periodic intervals. The fundamental converter studied here consists of an IGBT (Insulated Gate Bipolar mode Transistor), an inductor, a capacitor, a diode, a PWM-IC (Pulse Width Modulation Integrated Circuit) controller with oscillator, amplifier, and comparator. The PWM-IC is a core element and delivers the switching waveform to the gate of the IGBT in a stable manner. Display of the DC/DC converter output depends on the IGBT's changes in the threshold voltage and PWM-IC's pulse width. The simulation was conducted by PSIM software, and the hardware of the DC/DC converter was also implemented. It is necessary to study the fact that the output voltage depends on the duty rate of D, and to compare the output of experimental result with the theory and the simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.209-211
• /
• 2007

본 논문에서는 회생에너지 저장시스템의 충/방전 제어를 위한 가선전압 모의 장치를 제안한다. 제안된 시뮬레이터는 실측된 가선전압 데이터를 입력으로 받아 실측 가선전압과 동일한 전압패턴으로 모사한다. 이러한 전압패턴은 회생에너지가 포함된 가선전압이며 이를 토대로 에너지 저장시스템에 연계시켜 충/방전 제어를 좀 더 효율적으로 수행할 수 있다. 제안된 시뮬레이터는 AC/DC 컨버터 타입으로 시뮬레이션과 실험을 통해 제안된 시스템의 타당성을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1467-1472
• /
• 2003

Fouling of heat exchangers is generated by water-borne deposits, commonly known as foulants including particulate matter from the air, migrated corrosion produces; silt, clays, and sand suspended in water; organic contaminants; and boron based deposits in plants. This fouling is known to interfere with normal flow characteristics and reduce thermal efficiencies of heat exchangers. This paper focuses on fouling analyses for six heat exchangers of two primary systems in two nuclear power plants; the regenerative heat exchangers of the chemical and volume control system and the component cooling water heat exchangers of the component cooling water system. To analyze the fouling for heat exchangers, fouling factor was introduced based on the ASME O&M codes and TEMA standards. Based on the results of the fouling analyses, the present thermal performances and fouling levels for the six heat exchangers were predicted.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.510-510
• /
• 2000

This paper introduces the design of BiCMOS latched comparator circuit for high-speed system application, which can be used in data conversion, instrumentation, communication system etc. By exploiting the advantage technology of the combination of both the bipolar transistor and the CMOS transistor devices. The comparator circuit includes an input stage that combines MOS sampling with a bipolar regenerative amplifier. The resistive load of conventional current-steering comparator is replaced by a load, which is made by a NMOS transistor. The advantage of design and PSPICE simulation of BiCMOS latched comparator are the circuit will obtain wide bandwidth with lowest power consumption at a single supply voltage. All the characteristics of the proposed BiCMOS latched comparator circuit is carried out by simulation program.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.106-116
• /
• 1997

In this paper, using MATLAB SIMULINK, a generalized design methodology was suggested for multi pass transmission(MPT) by classifying the vehicle power train as prime mover, MPT and vehicle dynamics. This approach enables a designer to investigate the influence of each transmission component by simple combination of system components without changes of overall program. Using the design methodology, a MPT consisting of CVT, 2, clutches and reduction gears was designed for a braking energy regenerative flywheel hybrid vehicle. The CVT is essential in order to connect the engine and flywheel speed with the vehicle speed. For the purpose of smooth clutch operation, control algorithm was suggested by introducing dead zone for the clutch engagement. Using the SIMULINK model, performance of the flywheel hybrid vehicle with MPT was investigated. It was observed from the simulation results that the MPT vehicle showed better fuel economy, 47% than that of AT vehicle, 27% than that of CVT vehicle for ECE-15 driving cycle. Especially destinct fuel efficiency improvement was obtained for city driving cycle requiring more frequent stop and start.

• 전력전자학회논문지
• /
• 제14권1호
• /
• pp.62-71
• /
• 2009

본 논문에서는 마이크로 변위제어 시스템의 적층형 압전 액츄에이터를 위한 스위칭 증폭 구동회로의 구동방법을 제시하고 성능을 평가하였다. 이 증폭기는 압전 액츄에이터로부터 임의의 용량성 부하에 저장된 에너지를 효율적으로 회수할 수 있는 장점이 있다. 기존의 전압 되먹임 제어 방식은 100mHz의 정현파 기준치 추종시, 총 왜곡율이 -32dB (${\approx}2.5%$)로서, 액츄에이터의 전압과 변위 사이의 비선형적 관계로 인한 오차발생을 확인할 수 있었다. 이를 개선하기 위하여 전하 제어방식을 살펴보았는데, 기존의 직렬 커패시터를 연결하는 대신, 변위 기준치를 미분하고, 이를 출력전류와 비교하는 방식으로 개선하였다. 전하량 되먹임 제어 적용시 변위의 왜곡률은 약 -52dB (${\approx}0.25%$)로서 선형성이 매우 우수한 특성을 보임을 알 수 있다. 마지막으로 살펴본 직접 변위 제어 방식은 구현상의 복잡성으로 성능의 한계가 존재함을 알 수 있다.

• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.116-121
• /
• 2012

DC/DC스위칭 전력 컨버터는 임의의 직류전원을 부하가 요구하는 형태의 직류전원으로 변환시킨다. DC/DC 컨버터는 PWM-IC를 이용하여 주기적으로 입력측에서 출력측으로 전달되는 에너지를 제어하는 기능을 수행하는데, PWM-IC(펄스폭 변조-집적회로), MOSFET(산화물-반도체 전계 효과 트랜지스터), 인덕터, 콘덴서, 저항 등으로 구성되어 있다. 방사선의 영향으로 DC/DC 컨버터의 PWM-IC 를 구성하는 비교기(comparator)와 연산증폭기(OP-Amp.) 등 전자소자의 열화 효과(radiation effects)가 발생되는데, PWM-IC 동작에서 SPICE 시뮬레이션과 실험을 통해 펄스의 상실, 펄스폭의 변화, 그리고 출력파형의 변화를 연구하는데 있다.

• Archives of Plastic Surgery
• /
• 제32권2호
• /
• pp.149-154
• /
• 2005

Low-power laser(LPL) delivers a small amount of energy without elevation of tissue temperature. LPL has been reported to have biostimulation effects including anti-inflammatory, analgesic, regenerative, immunocorrective, and vasodilative effects. However, the effect of LPL on hair growth has rarely been studied. We investigated the effect of LPL on hair growth in the mouse. After depilation of back skin of mice, we classified the mice into 4 groups: control, laser irradiated group, $MoandMore^{(R)}$ applied group, and Spella $707^{(R)}$ applied group. Laser irradiation or application of these drugs were performed on the back skin of the mice for 30 days. The results are summarized as follows. Hair growth of control was first observed at 13 days after depilation, and complete hair regrowth was observed at 25 days. Hair growth of both laser irradiation group and $MoandMore^{(R)}$ applied group was first observed at 9 days after depilation, and complete hair regrowth was observed at 20 days. Hair growth of Spella $707^{(R)}$ applied group was firstly observed at the 9 days after depilation, and complete hair regrowth was observed at the 15 days. Hair growth started at the irradiation site in the laser irradiation group, but it started at the random sites in other groups. In conclusion LPL irradiation have a stimulating effect on the hair growth in the mouse.