• 에너지공학
• /
• 제22권2호
• /
• pp.169-174
• /
• 2013

순산소 축열연소시스템에서 세라믹 볼 축열체 적용에 따른 축열/재생 특성에 관한 실험적 연구를 수행하였다. 설계인자인 볼 직경, 축열체 무게, 연소부하 변동에 따른 축열/재생 특성을 살펴보았다. 양방향 순산소 축열연소시스템 장치를 구성하여 축열체를 통과하는 배가스 및 산소의 온도를 측정하였다. 실험결과, 볼 직경과 축열체 무게 변동에 따라 배가스 및 산소 온도분포의 변화가 나타났으며, 연소부하 변동시 상대적으로 큰 온도분포의 변화가 측정되었다. 볼 직경이 작아지고 축열체 무게가 증가될수록 측정된 재생온도효율은 증가되었다. 한편, 높은 재생온도효율에 비해 열 회수율은 낮게 예측되어 열 회수율을 향상시키기 위해 축열구조 설계 최적화가 필요함을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권11호
• /
• pp.1490-1498
• /
• 2001

In this paper, a regenerative braking algorithm is presented and performance of a hybrid electric vehicle (HEV) is investigated. The regenerative braking algorithm calculates the available regenera tive braking torque by considering the motor characteristics, the battery SOC and the CVT speed ratio. When the regenerative braking and the friction braking are applied simultaneously, the friction braking torque corresponding to the regenerative braking should be reduced by decreasing the hydraulic pressure at the front wheel. To implement the regenerative braking algorithm, a hydraulic braking module is designed. In addition, the HEV powertrain models including the internal combustion engine, electric motor, battery, CVT and the regenerative braking system are obtained using AMESim, and the regenerative braking performance is investigated by the simulation. Simulation results show that the proposed regenerative braking algorithm contributes to increasing the battery SOC which results in the improved fuel economy. To verify the regenerative braking algorithm, an experimental study is performed. It is found from the experimental results that the regenerative braking hydraulic module developed in this study generates the desired front wheel hydraulic pressure specified by the regenerative braking control algorithm.

• 한국추진공학회지
• /
• 제5권2호
• /
• pp.1-7
• /
• 2001

매우 높은 연소가스로부터 연소실을 보호하기 위하여 액체로켓에서는 재생냉각방법을 폭넓게 이용하고 있다. 재생냉각을 통한 로켓엔진의 냉각을 매우 효과적인 방법이지만, 이를 개발하기 위해서는 정확한 해석과정, 제작기술 등이 필요하다. 한다. 실제 소형 로켓엔진에 재생냉각을 이용한 엔진 냉각의 가능성을 확인하기 위하여 설계, 제작된 로켓으로 연소실험을 진행하였다. 실험에 사용한 연소실은 coolant passage 3 mm, 벽 두께 1 mm, stainless 304로 제작하였다. 최대연소압과 연소시간은 각각 400 psi와 60 sec이고, coolant 유량은 2 kg/s에서 0.12 kg/s까지 감소시키면서 실험하였다. 연소시험후 육안으로 검사한 결과 연소실에서 특별한 이상은 발견되지 않았다.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.38-47
• /
• 2005

In this paper, a regenerative braking algorithm is proposed to make the maximum use of the regenerative braking energy for an independent front and rear motor drive parallel HEV. In the regenerative braking algorithm, the regenerative torque is determined by considering the motor capacity, motor efficiency, battery SOC, gear ratio, clutch state, engine speed and vehicle velocity. To implement the regenerative braking algorithm, HEV powertrain models including the internal combustion engine, electric motor, battery, manual transmission and the regenerative braking system are developed using MATLAB, and the regenerative braking performance is investigated by the simulator. Simulation results show that the proposed regenerative braking algorithm contributes to increasing the battery SOC, which recuperates 60 percent of the total braking energy while satisfying the design specification of the control logic. In addition, a control algorithm which limits the regenerative braking is suggested by considering the battery power capacity and dynamic response characteristics of the hydraulic control module.

• 항공우주시스템공학회지
• /
• 제14권4호
• /
• pp.32-39
• /
• 2020

A technological review and analysis were performed on thermal cracking of aviation hydrocarbon fuels that circulate as coolants in regenerative cooling systems of hypersonic flights. Liquid hydrocarbons decompose into low-carbon-number hydrocarbons when they absorb a considerable amount of energy at extremely high temperatures, and these thermal cracking behaviors are represented by heat sink capacity, conversion ratio, reaction products, and coking propensity. These parameters are closely interrelated, and thus, they must be considered for optimum performance in terms of the overall heat absorption in the regenerative cooling system and supersonic combustion in the scramjet engine.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.79-84
• /
• 2002

The catalytic heat exchanger was designed which employs the regenerative preheating system of combustion air. The characteristics of the catalytic heat exchanger have been experimentally studied at the various operating parameters. The results showed that the mixture velocity did not affect significantly the performance of catalytic combustor whereas the preheating temperature of combustion air affected significantly the conversion rate. The complete conversion was achieved in the catalyzed honeycomb at a preheating temperature of $370-390^{\circ}C$, a mixture velocity of 0.53 $^{\sim}$ 0.75 m/s and an equivalence ratio of 0.19 $^{\sim}$ 0.27. The heat exchange efficiency of the catalytic heat exchanger appeared to be about 75 % when the air of room temperature was used as a working fluid. The results showed that both the heat balance of the system and the mixture conditions determine its stable catalytic combustion.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2003년도 추계 학술발표회 논문집
• /
• pp.299-304
• /
• 2003

Heat regenerator occupied by regenerative materials improves thermal efficiency of regenerative combustion system through the recovery of sensible heat of exhaust gases. By using one-dimensional two-phase fluid dynamics model, the unsteady thermal flow of regenerators with spherical particles were numerically analyzed to evaluate performance of ratio of waste heat recovery and temperature efficiency and to suggest optimized conditions of heat regenerator. It is predicted that exhaust gases temperature at regenerator outlet of 3.5$\times$10$^{6}$ kcal/hr heat regenerator is even lower than design condition and ratio of waste heat recovery is 75.8％.

• 유공압시스템학회논문집
• /
• 제5권4호
• /
• pp.1-9
• /
• 2008

In this paper, an energy regeneration algorithm is proposed to make the maximum use of the regenerative braking energy for a parallel hybrid electric vehicle(HEV) equipped with a continuous variable transmission(CVT). The regenerative algorithm is developed by considering the battery state of charge(SOC), vehicle velocity and motor capacity. The hydraulic module consists of a reducing valve and a power unit to supply the front wheel brake pressure according to the control algorithm. In order to evaluate the performance of the regenerative braking algorithm and the hydraulic module, a hardware-in-the-loop simulation (HILS) is performed. In the HILS system, the brake system consists of four wheel brakes and the hydraulic module. Dynamic characteristics of the HEV are simulated using an HEV simulator. In the HEV simulator, each element of the HEV powertrain such as internal combustion engine, motor, battery and CVT is modelled using MATLAB/$Simulink^{(R)}$. In the HILS, a driver operates the brake pedal with his or her foot while the vehicle speed is displayed on the monitor in real time. It is found from the HILS that the regenerative braking algorithm and the hydraulic module suggested in this paper provide a satisfactory braking performance in tracking the driving schedule and maintaining the battery state of charge.

• 한국추진공학회지
• /
• 제10권2호
• /
• pp.53-61
• /
• 2006

3차원 냉각 채널을 가지는 재생 냉각 시스템에 대하여 축대칭 열유속 모델을 이용한 축대칭 열해석을 수행하고자 하였다. 연소실 벽면에서의 급격한 온도 분포 및 열전달량을 정확히 모사하기 위한 격자 테스트 수행하고, 냉각재와 연소 가스의 온도에 따른 물성치 변화가 냉각 성능 예측에 미치는 영향들을 살펴보았다. 핀효율을 이용한 축대칭 열유속 모델이 3차원 냉각 채널에서의 열전달량과 동일한 열전달량을 나타낼 수 있도록 정의하였다. 제안된 모델을 이용한 축대칭 해석 결과가 1차원 해석 모델보다 우수하며 3차원 해석 결과에 근접한 온도 분포를 보임을 확인하였다.

• 한국추진공학회지
• /
• 제7권2호
• /
• pp.54-61
• /
• 2003

본 연구에서는 액체로켓에서 널리 사용되는 재생냉각시스템이 장치된 실험용 액체로켓 엔진을 설계하고 제작하여 연소실험을 수행한 내용을 다루었다. 설계 프로그램을 이용하여 엔진을 설계하였고 이를 바탕으로 엔진을 제작하였다. 연소실험을 통해 측정한 열유속이 계산에 의한 해석결과와 유사하므로 실제로켓엔진의 설계 및 제작에 설계 프로그램을 이용할 수 있음을 확인하였다. 또한 연소시 생성된 탄소층이 냉각성능에 미치는 영향을 간단히 고찰하였다.