• Microbiology and Biotechnology Letters
• /
• v.16 no.2
• /
• pp.163-167
• /
• 1988

The conditions for the protoplast fusion of auxotrophic mutants of Penicillium verruculosum were determined. A preparation of commercial enzyme Novozym 234 was used to successfully isolate protoplast from the 20hr old mycelium of P. verruculosum. Under optimal condition, the protoplast yield ranged from 2.4$\times$10$^7$ to 3.0$\times$10$^7$ protoplasts from 400mg of damp mycelia of various auxotrophic mutant strains. The regeneration frequency ranged from 26.6 to 42.4% and the spontaneous reversion frequency of the protoplasts on the regeneration minimal medium was less than 10$^7$. The optimal concentration of PEG 6000 was 20%, and exposure of protoplasts to PEG for 10 min was found to be sufficient for protoplast fusion. Optimal pH of fusion mixture was deter-mined as 5.5 and l0mM of calcium chloride in fusion mixture effectively enhanced the protoplast fusion frequency. Under optimal condition, the fusion frequency between various auxotrophs ranged from 1.8$\times$10$^{-3}$ to 3.5$\times$0$^{-3}$.

• Korean Journal of Microbiology
• /
• v.26 no.1
• /
• pp.37-43
• /
• 1988

This research was focused on investigation of the condition for protoplast formation and regeneration of protoplast fusion between Saccharomyces cerevisiae which has fermentation ability and Candida cariosilignicola which can grow at high temperature and utilize methanol. The results obtained were as follows; The highest production was collected in exponential growth phase. Ninety-nine% protoplast formation of C. cariosilignicola was obtained in glycin-NaOH buffer (pH10.0) containing Zymolyase 0.5mg/ml at $35^{\circ}C$ for 1hr incubation. The highest regeneration was produced when protoplast wuwpension containing 0.5% soft agar in buffered 50mM $CaCl_{2}$ was poured as a soft overlay onto 2% agar plates. Equal amuont of protoplast suspension of two strains was mixed and centrifuged. The subsequent pellet was added to 2ml of 35% polyethylene glycol (MW 4,000) containing 50mM $CaCl_{2}$, and incubated at $30^{\circ}C$ for 10min. Then 0.1ml of the suspension of aggregated protoplast was immediately covered with minimal medium and incubated at $40^{\circ}C$ for 5-7 days. As results, $SC_{1}$, $SC_{2}$, and $SC_{3}$ fusants were obtained. The physiological characteristics of fusants produced by protoplast fusion were; $SC_{1}$, and $SC_{2}$ utilized maltose, galactose, methanol, potassium nitrate. $SC_{3}$ utilized all the above materials except galactose.

• Microbiology and Biotechnology Letters
• /
• v.13 no.4
• /
• pp.391-395
• /
• 1985

In order to develope a protoplast fusion system for citric acid and SCP producing Candida lipolytica, the optimal conditions for the formation and regeneration of protoplast were examined and the protoplast fusion was performed. At the optimal conditions of growth phase and Zymolyase treatment, frequencies of protoplast formation were 98%. Approximately 20-30% of protoplasts were regenerated on the regeneration minimal medium containing 3% agar and 30mM $CaCl_2$ with the overlay of the same medium. The fusion frequencies, 4-5${\pm}$10$^{-4}$, were accomplished by the treatment of two nutritionally complementary auxotrophic protoplasts, L-14 ($lys^-$) and T-24 (X$30^-$), with 30% PEG 6000 containing 100mM $CaCl_2$ at $30^{\circ}C$ for 20 minutes.

• Microbiology and Biotechnology Letters
• /
• v.18 no.5
• /
• pp.460-465
• /
• 1990

Regeneration of protoplast was effective by preincubating spore suspension containing 30$\mu g$/ml of 2-DG for 4 hours, and CBE medium containing casamino acid, bovine serum albumin, ergosterol and myoinositol was found to be more efficient than any other regeneration medium tested in this experiment. The regeneration frequency was about 30%. Optimal conditions for conidial protoplast fusion were obtained by treatment of protoplasts with 10 mM $CaCl_2$ and 30% polyethylene glycol 4000 (pH 7.5) as fusogenic agent at $37^{\circ}C$ for 10 minutes. The fusion frequency was $8.2\times 10^{-4}$. The higher productivity of enzyme of fusant FWN-56 was achived: 2.3-fold for CMCase, 1.5-fold for avicelase, 1.8-fold for $\beta$-glucosidase and 2.5-fold for xylanase compared to that obtained in two parental strains. The genetic stability of fusant after maintenance on minimal medium for more than 4 weeks was high because segregant rate was below 1%. The conidial DNA content of fusant was 1.4-1.6 times higher than that of the parental strains, The nucleus size of fusants were also higher than that of each parental strains.

• BMB Reports
• /
• v.49 no.1
• /
• pp.26-36
• /
• 2016

Emerging trends for cardiac tissue engineering are focused on increasing the biocompatibility and tissue regeneration ability of artificial heart tissue by incorporating various cell sources and bioactive molecules. Although primary cardiomyocytes can be successfully implanted, clinical applications are restricted due to their low survival rates and poor proliferation. To develop successful cardiovascular tissue regeneration systems, new technologies must be introduced to improve myocardial regeneration. Electrospinning is a simple, versatile technique for fabricating nanofibers. Here, we discuss various biodegradable polymers (natural, synthetic, and combinatorial polymers) that can be used for fiber fabrication. We also describe a series of fiber modification methods that can increase cell survival, proliferation, and migration and provide supporting mechanical properties by mimicking micro-environment structures, such as the extracellular matrix (ECM). In addition, the applications and types of nanofiber-based scaffolds for myocardial regeneration are described. Finally, fusion research methods combined with stem cells and scaffolds to improve biocompatibility are discussed. [BMB Reports 2016; 49(1): 26-36]

• Journal of Microbiology and Biotechnology
• /
• v.3 no.1
• /
• pp.24-30
• /
• 1993

In order to develop a novel yeast which produces the charateristic aroma of soy sauce, a protoplast fusion between Zygosaccharomyces rouxii WFS4 and Torulopsis versatilis IAM 4993 was carried out. Auxotrophic mutants as selective markers were obtained from Zygosaccharomyces rouxii and Torulopsis versatilis by treatment of N-methyl-N -nitro-N-nitrosoguanidine. The conditions of the protoplast formation and the regeneration for fusion were examined. The protoplast fusion using polyethylene glycol 4000 led to the fusion frequency of $4~5{\times}10^{-7}\;cells/ml$. Among fusants, a fusant ST723-F31 presented the best results in terms of the aromaticity of fragrance, the growth pattern, the resistance against salt and the degree of growth according to pH. It makes easy to control the production and the balance of aroma components so that it gives a good flavor, shortens the fermentation period and, simplifies the preparation process when using a bioreactor into which fusant is immobilized.

• Korean Journal of Microbiology
• /
• v.24 no.2
• /
• pp.91-97
• /
• 1986

Intra and interspecfic fusants were produced by the protoplast fusion of auxotrophic mutants from Trichoderma koningii ATCC 26113 and Trichoderma reesei QM 9414. It was found that 0.6M $MgSO_4\;and\;0.6M\;NH_4Cl$ was the best osmotic stabilizer for the preparation of protoplasts from the mycelium of T. koningii and T. reesei respectively. However, $MgSO_4$ was the most suitable one for the regeneration of the protoplasts from both species. The intraspecific protoplast fusion frequencies between the auxotrophic mutants from T. reesei were $1.8{\times}10^{-2}\;to\;5.1{\times}10^{-1}$. Interspecific protoplast fusion frequencies between the auxotrophic mutants from T. koningii and T. reesei were $3.6{\times}10^{-3}$\;to\;8.4{\times}10^{-2}. Interspecific complementing fusants, however, were not alwats produced. Fusants obtained from interspecific potoplast fusion were spontaneously segregated into various strains including parental types, non-parental auxotrophic hybrids, and prototrophic hybrids on complete plate. Interspecific hybrids revealed to have partially enhanced celluloytic activities.

• Korean Journal of Microbiology
• /
• v.28 no.2
• /
• pp.98-103
• /
• 1990

Brevibacterium lactofermentum SWA (arg trp) and B. lactofermentum SWB (met ser) were obtained from UV and NTG treatment. The rates of protoplast formation by B. lactofermentum SWA and SWB were 99.93% and 99.98%, respectively when each strain was treated with penicillin G in mid exponential growth phase, followed by incubation with 400 $\mu\textrm{g}$/ml of lysozyme in lysis fluid supplemented with 0.4M sucrose. Frequencies of protoplast regeneration in B. lactofermentum SWA and B. lactofermentum SWB were 9.27% and 10.32% respectively, on regeneration medium containing 0.5M sodium succinate, 50 mM $Mg^{2+}$, and 3% PVP. In intraspecific protoplast fusion between B. lactofermentum SWA and B. lactofermentum SWB, fusion frequency of $2.30\times 10^{-5}$ was observed by using the 100mM $CaCl_{2}$ and 30% PEG 6,000 in fusion fluid. Relative recombinant frequencies in each marker by means of selective media could be used for genetic analysis.

• Korean Journal of Microbiology
• /
• v.27 no.4
• /
• pp.422-429
• /
• 1989

Auxotrophic mutant were isolated from wild types by the treatment with NTG as a mutagen, and the conditions of protoplast formation for them were established. The protoplasts of killer yeast Saccharomyces cerevisiae K52 were formed to the level of above 70% when cells grown for 20 hr in PM medium were treated with 200 unit/ml Lyticase 50,000 at $30^{\circ}C$ for 60 min after pretreatment of 50 mM 2-mercaptoethanol in 10mM potassium phosphate buffer (pH 7.5) containing EDTA and 0.6 M sorbitol for 15 min. Also, the protoplast of the recipient S. cerevisiae S 29 were formed to the level of above 85% as it was cultured to the log phase of 24 hr in PM medium under the same conditions. The fusion frequency between the protoplast of killer yeast S. cerevisiae K 52 and the protoplast of recipient S. cerevisiae S 29 was reached to $8.2\times 10^{-6}$ when the hypertonic regeneration medium embeded with the fused protoplasts after mixing the parental protoplasts to 10$^{8}$ cells/ml in SP buffer containing 20 mM $CaCl_{2}$ and 30% PEG 6,000 for 15 min at $30^{\circ}C$ were incubated.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.493-498
• /
• 2015

For biomaterials for skin regeneration with minimized inflammatory response, high bioactivity and biocompatibility are highly required. Also, it should have a porous microstructure to improve cell adhesion and growth. In this study, we extracted a new collagen source from duck's feet which is by-product, and made the shape of sponges from duck's feet collagen (DC) to compare with DBP and SIS. To analyze physical and chemical property of the scaffold, SEM and FTIR were used. MTT assay was used to measure the attachment and proliferation of NIH/3T3 in the scaffolds. RTPCR was used to evaluate the expression of proinflammatory cytokine. Also, 1,1-diphenyl-2-picrylhydrazyl (DPPH) was used to measure the ability of antioxidant activity. Overall, this study shows that DC scaffold is biocompatible and has good physical property. Additionally, DC scaffold shows the potential as wound healing biomaterials.