• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.3-9
• /
• 2005

In this study, the utilization possibility of coal-preparation refuse emitted from Hwasun coal mine in Korea as a raw material for ceramic body was investigated. The firing shrinkage ratio of ceramic specimen made from the coal-preparation refuse was reduced with increasing the addition amounts of that, while the compressive strength was slightly decreased. The weight of ceramic body was also reduced because carbon contained in the coal-preparation refuse was burn by fring. The water adsorption ratio of the ceramic specimen was under 10 wt%, and the compressive strength of that was over 21 MPa at over $1,150^{\circ}C$ for 2 hr. Therefore, it was possible to make the 1st garde clay brick of KS L 4201 from the coal-preparation refuse.

• Journal of environmental and Sanitary engineering
• /
• v.3 no.2 s.5
• /
• pp.79-90
• /
• 1988

Untill to-day the disposal of municipal refuse in Korea is entirely depending on dumping the refuse into concave land except a few case that bring about the secondary pollution by generating insects, offensive odour and the dust blow which cause adverse effects to dwelling community in the vicinity. It is widely recognized since Korea is ready to be advanced nation must be carried out the proper way of refuse disposal as meet with the environmental standard and ready to accept by general public. Refuse disposal that is practiced by world wide is known as sanitary landfill although it bears some what the expensive construction and operation costs rather than the plain dumping. The following statement is the construction of sanitary landfill in brief. When one takes a look at the Unites States which has huge territory normaly carry out the refuse disposal by anaerobic improved landfill method while the country has limitted land is experimenting various types of landfill which bring about the earier reuse of completed landfill site and minimise the secondary pollution. The author of this article consider out of several landfill methods the semi aerobic landfill will be widely applied in Korea in coming day, the following article will elaborate little more about the semi aerobic method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.557-560
• /
• 2005

Production, utilization and related regulation of refuse derived fuel in Korea have been discussed in this paper. Also, the expected future of RDF has been discussed. Although the interest about RDF has been increased continuously , there are many things that must be solved for the development of RDF industry. Compared with other developed country, inadequacy of regulation about RDF and the lack of possible utilization facility make the limitation for the development of RDF industry.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1109-1113
• /
• 1993

A refuse incineration plant is a complex process, whose multi-variable control problems can not be solved conventionally by deriving an exact mathematical model of the process. The usage of advanced fuzzy technologies within the suitable development methodology is demonstrated by a controller implemented for the refuse incineration plant in Hamburg-Stapelfeld, Germany.

• The KSFM Journal of Fluid Machinery
• /
• v.12 no.3
• /
• pp.13-18
• /
• 2009

This paper describes flow characteristics in a piping system having various duct shapes on refuse collecting system. A simulator for the refuse collecting system is designed to analyze the flow characteristics in the piping system. The simulator consists of an air intake, a waste chute, circular duct having various shapes, cyclone and turbo blower. The simulator has four different duct shapes: straight, curved, inclined and Y-shaped ducts. Three-dimensional Navier-Stokes analysis is introduced to analyze the pressure loss in the piping system. Throughout the numerical simulation, pressure loss obtained by numerical simulation has a good agreement with the results of experimental measurements. The selected length of curved and Y-ducts for the pressure loss is determined using pressure distributions on the duct. Flow and pressure characteristics in the piping system of the simulator are evaluated by numerical simulation and discussed in detail.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.173-179
• /
• 2004

Combustion of refuse derived fuel(RDF) and refuse plastic fuel (RPF) was carried out in a lab-scale circulating fluidized bed. Experiment was investigated cold flow visualization. RDF was made by C & tech and RPF was made by KRS. The results include distribution of temperature in the combustion chamber, and concentrations of flue gas such as $O_2$, $CO_2$, CO, $NO_x$ and HCs Micro G.C(gas chromatograph) was employed to find out concentration of He Temperature distribution was different when RDF and RPF were burnt respectably. As air ratio became increased, $CO_2$, CO, and total of HCs emissions were decreased. According to the number of carbon atom of HCs, HC were classified as five kinds of HC.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.11
• /
• pp.2762-2770
• /
• 2000

The refuse incineration plant has an important role in saving the combustion energy for local heating system. But harmful combustion gas(NOx etc.) leads to some serious environmental problem. To reduce the gas, a SCR(Selective Catalytic Reduction)system is installed and it is controlled by adjusting the flow of ammonia gas(NH3) . In this paper, we apply a repetitive control method to reduce NOx by adjusting the flow of ammonia gas for SCR system in a refuse incineration plant which is located in Haeundae, Pusan, Firstly, we analyze the inlet NOx period by FFt method, and verify its periodic variations. Secondly, we design a repetitive control system by using state space model method. Lastly, the effectiveness of repetitive control system is shown by comparing to a conventional PID control in simulation and experimental results.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.11a
• /
• pp.81-86
• /
• 1997

It is proposed, for fuzzy combustion control system of refuse incinerator to find the relationship between inputs and outputs and to generate rules to control by using rough set theory. It is not easy to find out the corresponding inputs for each output and the control rules with incomplete or imprecise information consisting expert knowledge, process and manipulator values in the field, and operation manual for the given system. Most decision problems can be formulated employing decision table formalism. A decision table on fuzzy combustion control system for refuse incinerator is simplified and produces control(rules). The I/O realtions and the control rules found by rough set theory are compared with the previous result.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.89-95
• /
• 2009

The current enforce decree of "The Act on the Promotion of Construction Waste Recycling" divides seventeen kinds of construction wastes by property and configuration. Mixed construction waste, one of them classified by the enforce decree, is composed two more than justified construction wastes except refuse soil and rock. In construction wastes justified by enforce decree of this law, most refuse concrete and asphalt concrete of construction wastes are recycled. As well as refuse metal is separated, sorted from bulk them, and merchandised for value. Finally this is used the secondary manufactured products. Even though combustible construction wastes like refuse wood, plastics, fiber can be recycled RDF(Refuse derived fuel) or RPF(Refuse plastic fuel) because of high caloric value and low heavy metal but most of them are discharged as mixed construction waste and then treated by treated by incineration and landfill. Therefore, to control construction waste flow efficiently, construction wastes are classifies first combustible, incombustible, mixed combustible, incombustible and etc. in this study. The combustible waste is consisted refuse wood, plastics, fiber and etc. and incombustible waste contains refuse concrete, asphalt, and etc. Mixed construction is construction waste that can not separate from mixed waste bulk with different kinds.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.1
• /
• pp.35-44
• /
• 1995

The study was carried out to investigate on the response of environmental sanitation problems in action of the volume based waste charge system in Seoul The responses from the 346 persons who dwelled in Seoul was stimulatively answered, this system was considered as a successful on 70.5% of total answers, but little portion(29.4 % ) of those was unknown on the mean of this system. And we knew that this system was need to the communication and education through the press media about this one. After the action of the volume based waste system, the volume of refuse discharged in a day was decreased 30 ∼40% than before. In the problems of environmental sanitation after this system, the number of sanitary insect( cockroach etc ) and rat was decreased, also the production of orders and dust caused by refuse was decreased in comparison with those before. This results were considered that the Separate Collection should be perfectly performed. In response, the regular envelope of refuse was serious problems, the improvement for this one was demanded. The kind of difficult refuse treated was waste rubbers> electric products > furniture> foodstuffs> bottles, cans> papers, pulps etc, and the next proposal for this system should be prepared. Conclusively, the volume based waste charge system should be remarkable system In terms of resources recycling as well as wastes reduction. Above all in order to conform this system the separate collection system should be systematically performed, the next improvable proposal of the detailed methods in this system should be prepared.