• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.94-100
• /
• 2010

Nowadays, several nontraditional machining(NTM) processes are widely used to machine a complex and accurate shape part of hard materials, such as titanium, ceramics, high strength temperature resistant and refractory materials which are difficult to machine and having high strength, hardness, toughness. Machining of these complex shapes in such materials by traditional machining processes are very difficult. The NTM processes is important in the areas of micro- and nano scale machining, where high accuracy and superior surface characteristics are required, which can only be achieved using these NTM processes. So, for effective selection of different NTM processes, careful decision making for a given NTM application is often necessary. An appropriate NTM process for a given material and shape condition is very difficult for the novice engineers. In this paper, an expert system based on an analytic network process(ANP) is suggested for a best selection of NTM process in a NTM application considering an prior interdependency effect among various factors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.43-45
• /
• 1988

Four W/Cu system(60wt%W-40wt%Cu, -0.lwt%Ni, -0.5wt%Ni, -0.lwt%C) and four WC/Cu system(60wt%WC-40wt%Cu, -0.lwt%Ni, -0.5wt%Ni, 0.lwt%C) electrical contacts were prepared by a press-sinter-infiltration process to compare with their properties. Hardness and electrical conductivity are proportional to the refractory metal(W or WC) properties and showed the effect of additives. Arc erosion trend of switch test is changed by current level. High currant test at 1kA showed a different crack formation pattern and erosion mode between W/Cu system and WC/Cu system contacts.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.345-351
• /
• 1998

Thermal shock resistance of $Al_2O_3$- and Fe-$Al_2TiO_5$-based Castable Refractories was studied using a central heating technique. Ring type specimens, 10mm thick and 20 and 100mm inner and outer diameters, respectively, were rapidly heated on the internal surface of the centre hole using a high power electrical heating element. The temperature field was measured experimentally and modelled using finite element analysis (FEA). The thermal stress field was also modelled using FEA. A radial notch was introduced to the ring specimens to enable calculation of the thermal stress intensity factors (SIF). A special LVDT device was incorporated in the thermal shock tester to monitor crack mouth opening displacement (COD). The thermal shock fracture initiation and crack propagation behaviour of the castable refractories were ascertained using the COD measurements and the fracture mechanics analysis data.

• Korean Journal of Materials Research
• /
• v.10 no.6
• /
• pp.415-421
• /
• 2000

The effect of silica binder content on the mechanical properties of zircon shell mold was investigated. Content of binder silica sol to refractory powder in weight[$R_W$] was adjusted from 0.18 to 0.43. Sintering of the shell mold was carried out in the temperature range of $871^{\circ}C$ to $1400^{\circ}C$. Green strength of the shell mold at room temperature increased with increasing $R_W$ and sintering temperature up to $1300^{\circ}C$. However, the mold with $R_W$ of 0.43 that sintered at $1400^{\circ}C$ for 3 hours showed relatively low strength and large level of porosity. The mechanical behavior of the shells is supposed to attributed to the difference in thermal expansion coefficient between refractory powder and binder silica. The optimum value of $R_W$ for zircon-based shell molds was found to be 0.33.

• Journal of Powder Materials
• /
• v.26 no.2
• /
• pp.156-165
• /
• 2019

Over the last decade, the next generation's ultra-high-temperature materials as an alternative to Nickel-based superalloys have been highlighted. Ultra-high-temperature materials based on refractory metals are one of several potential candidates. In particular, molybdenum alloys with small amounts of silicon and boron (Mo-Si-B alloys) have superior properties at high temperature. However, research related to Mo-Si-B alloys were mainly conducted by several developed countries but garnered little interest in Korea. Therefore, in this review paper, we introduce the development history of Mo-Si-B alloys briefly and discuss the properties, particularly the mechanical and oxidation properties of Mo-Si-B alloys. We also introduce the latest research trends of Mo-Si-B alloys based on the research paper. Finally, for domestic research related to this field, we explain why Mo-Si-B alloys should be developed and suggest the potential directions for Mo-Si-B alloys research.

• Korean Journal of Materials Research
• /
• v.26 no.4
• /
• pp.182-186
• /
• 2016

Zircon, having excellent thermal, chemical, and mechanical properties, is utilized in refractory materials, electronic materials, chemical machines, structural materials, etc. However, zircon generally shows thermal dissociation to zirconia($ZrO_2$) and silica($SiO_2$) around the sintering temperature of $1540^{\circ}C$, and when zircon particles are small and impurities are present, thermal dissociation is known to occur at around $1100^{\circ}C$. This reduces the mechanical properties of $ZrSiO_4$. In this research, the effect of adding $SiO_2$ and 3Y-TZP to $ZrSiO_4$ has been studied in order to suppress dissociation and improve the mechanical properties. Addition of $SiO_2$ suppressed the dissociation of $ZrSiO_4$ at lower temperatures. It also enabled optimum packing between the particles, resulting in a dense microstructure and good mechanical properties. When 3Y-TZP was added, recombination with the dissociated $SiO_2$ resulted in good mechanical properties by suppressing the generation of pores and the densification of the microstructure.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.544-558
• /
• 2017

The objective of this research is to investigate preservative efficacy for refractory species in field tests. The field tests were set up to evaluate the preservative performance of western hemlock and white spruce preservative-treated to the residential products group C and D of Canadian standard (CSA O80 Series-08) that have been developed for residential use in above-ground and ground-contact conditions, respectively. They were incised and pressure-treated with alkaline copper quaternary (ACQ) or copper azole (CA). Treated samples for the ground contact stake test and ground proximity test were installed in Jinju, Korea on November 2010 according to AWPA E7-09 and AWPA E18-06, respectively. Each sample has been annually assigned ratings for decay and termite attack, based on AWPA E7 grading system. After six years and five months of exposure, the untreated samples showed decay and particularly severe damage by termite attack but all the preservative-treated samples showed no decay. The results showed that the 5-mm penetration depths may be applicable for the treatment of refractory species. This paper discusses what to consider for the use of refractory species in Korean wood preservation industry from the penetration and retention points of view.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.2
• /
• pp.799-805
• /
• 2016

Background: There is no standard treatment for patients with platinum-resistant or refractory epithelial ovarian cancer. Single agent chemotherapies have evidence of more efficacy and less toxicity than combination therapy. Most are very expensive, with appreciable toxicity and minimal survival. Since it is difficult to make comparison between outcomes, economic analysis of single-agent chemotherapy regimens and best supportive care may help to make decisions about an appropriate management for the affected patients. Objective: To evaluate the cost effectiveness of second-line chemotherapy compared with best supportive care for patients with platinum-resistant or refractory epithelial ovarian cancer. Materials and Methods: A Markov model was used to estimate the effectiveness and total costs associated with treatments. The hypothetical patient population comprised women aged 55 with platinum-resistant or refractory epithelial ovarian cancer. Four types of alternative treatment options were evaluated: 1) gemcitabine followed by BSC; 2) pegylated liposomal doxorubicin (PLD) followed by BSC; 3) gemcitabine followed by topotecan; and 4) PLD followed by topotecan. Baseline comparator of alternative treatments was BSC. Time horizon of the analysis was 2 years. Health care provider perspective and 3% discount rate were used to determine the costs of medical treatment in this study. Quality-adjusted life-years (QALY) were used to measure the treatment effectiveness. Treatment effectiveness data were derived from the literature. Costs were calculated from unit cost treatment of epithelial ovarian cancer patients at various stages of disease in King Chulalongkorn Memorial Hospital (KCMH) in the year 2011. Parameter uncertainty was tested in probabilistic sensitivity analysis by using Monte Carlo simulation. One-way sensitivity analysis was used to explore each variable's impact on the uncertainty of the results. Results: Approximated life expectancy of best supportive care was 0.182 years and its total cost was 26,862 Baht. All four alternative treatments increased life expectancy. Life expectancy of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 0.510, 0.513, 0.566, and 0.570 years, respectively. The total cost of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 113,000, 124,302, 139,788 and 151,135 Baht, respectively. PLD followed by topotecan had the highest expected quality-adjusted life-years but was the most expensive of all the above strategies. The incremental cost-effectiveness ratios (ICER) of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 344,643, 385,322, 385,856, and 420,299 Baht, respectively. Conclusions: All of the second-line chemotherapy strategies showed certain benefits due to an increased life-year gained compared with best supportive care. Moreover, gemcitabine as second-line chemotherapy followed by best supportive care in progressive disease case was likely to be more effective strategy with less cost from health care provider perspective. Gemcitabine was the most cost-effective treatment among all four alternative treatments. ICER is only an economic factor. Treatment decisions should be based on the patient benefit.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.2131-2135
• /
• 2013

Background: To evaluate the efficacy and safety of distearoylphosphatidylcholine pegylated liposomal doxorubicin (DPLD) combined with carboplatin for the treatment of platinum resistant or refractory epithelial ovarian cancer (EOC) or fallopian tube cancer. Materials and Methods: A retrospective analysis of women who received DPLD with carboplatin for recurrent EOC or fallopian tube cancer in King Chulalongkorn Memorial Hospital Thailand from January 2006 to August 2011 was conducted. Patients were identified from the medical records and data on demographic factors, stage, histology, surgical findings, cytoreduction status, and prior chemotherapies were abstracted. The efficacy and toxicity of DPLD/carboplatin were evaluated. Progression-free (PFS) and overall survival (OS) were estimated by the Kaplan-Meier method. Results: A total of 65 patients, 64 with platinum resistant or refractory epithelial ovarian cancer and 1 with fallopian tube cancer, were enrolled. DPLD and carboplatin were given for an average of 4.46 cycles per patient with a total of 273 cycles. Among the 65 evaluable patients, 0% achieved CR, 7.69% PR, 15.4% SD and 76.% PD. The overall response rate was 23.1%. With a median follow-up of 27.4 months, the median progression-free and median overall survival in the 36 patients was 4.46 months and 8.76 months respectively. In the aspect of side effects, palmar-plantar erythrodysesthesia (PPE) occurred in 33.3% (Grade I 22.2%, Grade II 11.1%) and mucositis in 41.7% (Grade I 27.8%, Grade II 13.9%) of all treatment cycles, all Grade 1 or 2. Anemia, leukopenia and thrombocytopenia occurred in 58.3% (Grade I 41.7%, Grade II 16.7%), 66.7% (Grade I 47.2%, Grade II 19.4%), and 22.2% (Grade I 16.6%, Grade II 5.56%) of cycle respectively, and were mostly Grade 1 or 2. Conclusions: DPLD, the second-generation PLD drug combined with carboplatin every 4 weeks, is effective and has low toxicity for treatment of patients with recurrent platinum-resistant or refractory epithelial ovarian cancer.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10855-10860
• /
• 2015

Background: The study aimed to investigate the analgesic effect of a combination of intravenous flurbiprofen axetil and opioids, and evaluate the relationship between refractory pain relief and plasma ${\beta}$-endorphin levels in cancer patients. Materials and Methods: A total of 120 cancer patients was randomly divided into two groups, 60 patients took orally morphine sulfate sustained-release tablets in group A, and another 60 patients receiving the combination treatment of intravenous flurbiprofen axetil and opioid drugs in group B. After 7 days, pain relief, quality of life improvement and side effects were evaluated. Furthermore, plasma ${\beta}$-endorphin levels were measured by radioimmunoassay. Results: With the combination treatment of intravenous intravenous flurbiprofen axetil and opioids, the total effective rate of pain relief rose to 91.4%, as compared to 82.1% when morphine sulfate sustained-release tablet was used alone. Compared with that of group A, the analgesic effect increased in group B (p=0.031). Moreover, satisfactory pain relief was associated with a significant increase in plasma ${\beta}$-endorphin levels. After the treatment, plasma ${\beta}$-endorphin level in group B was $62.4{\pm}13.5pg/ml$, which was higher than that in group A ($45.8{\pm}11.2pg/ml$) (p<0.05). Conclusions: Our results suggest the combination of intravenous flurbiprofen axetil and opioids can enhance the analgesic effect of opioid drugs by increasing plasma ${\beta}$-endorphin levels, which would offer a selected and reliable strategy for refractory cancer pain treatment.