• 제목/요약/키워드: Refractive components

검색결과 71건 처리시간 0.026초

$CaF_2$ crystal growth for using optical components of laser

  • Seo, Soo-Hyung;Kyoung Joo;Auh, Keun-Ho
    • 한국결정성장학회:학술대회논문집
    • /
    • 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
    • /
    • pp.9-13
    • /
    • 1998
  • Large vacuum Bridgman-Stockbarger (BS) equipments was composed for growing large diameter CaF2 crystals. The CaF2 crystal of 4.5-inch was grown under the conditions of freezing temperature gradient of 12$^{\circ}C$/cm and growing rate of 3mm/hr. Also the 6-inch crystal was grown by using thermal stabilization method under freezing temperature gradient of 14$^{\circ}C$/cm and growing rate of 2mm/hr. The dislocation density was characterized for evaluating the quality of crystals. And the optical properties such as transmittance, refractive index and fluorescence were analyzed in order to investigate on the applications of optical components.

  • PDF

시뮬레이션을 이용한 고효율 분산 브래그 반사경 최적화 설계 및 특성 (Design Optimization for High Efficiency Distributed Bragg Reflectors through Simulation Methodology)

  • 김관도
    • 전기전자학회논문지
    • /
    • 제22권1호
    • /
    • pp.189-192
    • /
    • 2018
  • 본 연구에서는 LED칩 및 LCD 검사장비의 핵심부품인 광학 필름제조에 많이 사용되고 있는 DBR(Distributed Bragg Reflectors) 구조에 대한 시뮬레이션 방법을 개발하고 이러한 다층박막 특성 시뮬레이션을 통하여 최적의 DBR 구조를 제시하였다. 고굴절률 유전체인 $TiO_2$와 저굴절률 유전체인 $SiO_2$ 박막을 교대로 적층한 다층박막 구조에서 $TiO_2$$SiO_2$의 refractive index 값을 사용하여 박막의 배치 및 조합에 따른 wavelength(nm) vs. reflectance(%) 스펙트럼을 계산하였고 이 결과로 시뮬레이션을 통한 고효율 분산 브래그 반사경 최적화 설계 및 공정에 활용하여 DBR 구조 제작에 사용할 수 있었다.

Ellipsometry를 이용한 Low-k SiOCH 박막의 유전특성에 관한 연구 (A Study of the Dielectric Characteristics of the Low-k SiOCH Thin Films by Ellipsometry)

  • 이인환;황창수;김홍배
    • 한국전기전자재료학회논문지
    • /
    • 제21권12호
    • /
    • pp.1083-1089
    • /
    • 2008
  • We studied the dielectric characteristics of low-k SiOCH thin films by Ellipsometry. The SiOCH thin films were prepared by deposition of BTMSM precursors on p-Si wafer by CCP-PECVD method. The nano-porous structural organic/inorganic hybrid-type of SiOCH thin films correlated directly to the formation of low dielectrics close to pore(k=1). The structural groups including highly dense pores in SiOCH thin films originated the anisotropic geometry type of network structure directing to complex refractive characteristics of SiOCH single layer on the p-Si wafer. The linearly polarized beam of Xe-ramp in the range from 190 nm to 2100 nm introduced to the surface of SiOCH thin film, and the reflected beam was Elliptically polarized by complex refractive coefficients of SiOCH dipole groups. The amplitude variation $\Psi$ and phase variation $\Delta$ of the relative reflective coefficients between perpendicular and parallel components to the incident plane were measured by Ellipsometry. The complex optical constants n and k as well as the dielectric constant and thickness of SiOCH thin films were driven by the measured value of $\Psi$ and $\Delta$.

실험계획법에 의한 GMP용 비구면 광학유리의 성질에 미치는 조성의 효과 연구 (Approach to Compositional Effect on Properties of Aspherical Optical Glass for GMP Process with Design of Experiments)

  • 맹지헌;김형준;정아름;김종철;최성철
    • 한국세라믹학회지
    • /
    • 제48권1호
    • /
    • pp.40-45
    • /
    • 2011
  • In this study, the composition of optical glass for GMP(glass molding process) was designed with 'Design of Experiments' method. All the composition batch was performed by 'Create Factorial Design' method. Particularly, $SiO_2$, BaO and $Al_2O_3$ were chosen major parameters for investigating the effects of components on optical and thermal properties. BaO and $Al_2O_3$ strongly influenced on optical and thermal properties, respectively. Finally, the approximate values of desired optical and thermal values were obtained by microtuning of compositions. At the composition of $BaO:Al_2O_3:SiO_2$=10:4:48 (molar ratio), refractive index($n_d$) was 1.5833, coefficient of thermal expansion(CTE) was $104{\times}10^{-7}/^{\circ}C$.

참깨에 대한 식품영양학적인 연구 - 제1보 탈피(脫皮)과정이 참기름 및 박(粕)의 품질에 미치는 영향 - (Chemical and Nutritional Studies on Sesamum indicum - I. Effects on the Quality of Sesame Oil and its Meal by Decortication -)

  • 신효선
    • 한국식품과학회지
    • /
    • 제5권2호
    • /
    • pp.113-118
    • /
    • 1973
  • 한국산의 참깨를 탈피(脫皮) 한 것과 탈피(脫皮) 하지 않은것, 이들을 각각 채유(採油)한 기름 및 박(粕)에 대하여 일반성분, 기름의 성상(性狀), 지방 조성, 아미노산 조성, 특수 미량성분 및 oxalate 의 함량 들을 비교 분석한 결과 다음과 같은 결론을 얻었다. 1) 탈피(脫皮)참깨 및 그 박(粕)은 탈피(脫皮)하지 않은 전(全)참깨 및 박(粕)보다 조섬유, 조회분, 산불용성회분의 함량이 더 적었다. 2) 탈피(脫皮)참깨기름은 전(全)참기름 보다 비중, 굴절률, 옥소가, 비검화물, 불용성잡물의 함량이 더 컸었다. 3) 탈피(脫皮)참기름과 전(全)참기름의 지방상 조성은 서로 비슷하였으나 전자는 후자보다 불포화지방산의 함량이 다소 적었다. 4) 탈피(脫皮)참깨박(粕)은 전(全)참깨박(粕)보다 단백질 함량이 매우 높았다. 그리고 아미노산 조성은 서로 거의 비슷하였으며 이들의 박(粕)은 모두 methionine, Cystine, tryptophan 은 풍부하나 lysine 의 함량이 적었다. 5) 탈피(脫皮)참깨기름과 전(全)참깨기름중의 sesamol, sesamolin 및 sesamin 의 함량은 서로 차이점이 없었다. 6) 탈피(脫皮)참깨 및 그박(粕)은 전(全)참깨 및 그박(粕)보다 oxalate 및 calcium 의 함량이 적었다.

  • PDF

Smart Particles Containing Multiple Rugate-structured Photonic Crystal

  • Jang, Seunghyun
    • 통합자연과학논문집
    • /
    • 제5권4호
    • /
    • pp.253-256
    • /
    • 2012
  • The rugate porous silicons containing multiple photonic band gaps have been generated by applying a composite waveform summed three computer-generated pseudo-sinusoidal current waveforms and exhibit three sharp photonic band gaps in the optical reflectivity spectrum. Generated multiple rugate porous silicons display three rugate peaks corresponding to the each of the sine components varied from 0.42, 0.36, and 0.30 Hz, with a spacing of 0.06 Hz between each sine component. The resulting rugate PSi films have been removed from the silicon substrate by applying an lift-off current and are then made into particles by ultrasono-method in a organic solution. The sensing experiments using these particles for organic solvents such as toluene, hexane, acetone, and methanol have been achieved. Condensing of organic vapors in the pores increases the refractive indices of entire particle which results a red shift in the photonic peaks.

MCT 표면보호를 위한 양극산화막 성장 (Growth mechanism of anodic oxide for MCT passivation)

  • 정진원;왕진석
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제8권3호
    • /
    • pp.352-356
    • /
    • 1995
  • Native oxide layer on MCT (HgCdTe) has been grown uniformly in H$\_$2/O$\_$2/ electrolyte through anodic oxidation method. It has been determined that anodic oxidation of HgCdTe in H$\_$2/O$\_$2/ electrolyte proceeds immediately with the input of constant currents without any induction time required for anodic oxideation in KOH electrolyte. Oxide layer with the resistivity of 2*10$\^$10/.ohm.cm and the refractive index of 2.1 suggested the possibility of well matching combination layer with ZnS for MCT MIS device. XPS results indicated that the major components of oxide layer grown in H202 solution is TeO$\_$2/ with the possibility of small amounts of CdTeO$\_$3/.

  • PDF

FABRICATION AND CHARACTERIZATION OF NONLINEAR OPTICAL GLASSES

  • Cardinal, T.;Fargin, E.;Le Flem, G.
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
    • /
    • pp.4-5
    • /
    • 2001
  • Advent of lasers offering high intensity beam has opened the glass to the nonlinear optic (NLO). The high electric field associated with such laser beams can be so large that high order components of the glass polarization can be measured. Such development is of scientific and technological interests in particular in systems involving an intensity-dependent refractive index and/or ultra-fast response (<10$\^$-12/s). From a scientific viewpoint the NLO response intensity must be understood as a function of the glass composition. On the other hand, large family of applications are presently under investigation in various fields of optical materials or systems e.g. laser glasses for fusion energy, soliton propagation for ultra-long distances, ultra-fast-switching, optical storage etc....(omitted)

  • PDF

Photonic Bandgap Bragg Fibers: A New Platform for Realizing application-specific Specialty Optical Fibers and Components

  • Pal, Bishnu P.
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2006년도 동계학술발표회 논문집
    • /
    • pp.87-88
    • /
    • 2006
  • Bragg fibers, consisting of a low index core (including air) surrounded by a series of periodic layers of alternate high and low refractive index materials, each being higher than that of the core, form a 1D photonic bandgap (PBG). In view of the multitude of individual physical parameters that characterize a Bragg fiber, they offer a wide choice of parametric avenues to tailor their propagation characteristics. Owing to their unique PBG guidance mechanism, Bragg fibers indeed exhibit unusual dispersion characteristics that are otherwise nearly impossible to achieve in conventional silica fibers. Solid core Bragg fibers, amenable to fabrication by the highly mature MCVD technology, could be designed to realize broadband supercontinuum light. This talk would review our recent works on modeling of propagation characteristics, dispersion tailoring in them for applications as metro as well as dispersion compensating fibers and also as supercontinuum light generators.

  • PDF

Terahertz Frequency Spreading Filter via One-dimensional Dielectric Multilayer Structures

  • Yi, Min-Woo;Kim, Young-Chan;Yee, Dae-Su;Ahn, Jae-Wook
    • Journal of the Optical Society of Korea
    • /
    • 제13권3호
    • /
    • pp.398-402
    • /
    • 2009
  • We present a method of using one-dimensional dielectric multilayer structures for designing terahertz frequency spreading filters. The interference of terahertz pulses in these structures composed of alternating weak and strong refractive materials allows design of well-separated THz frequency components within a modulation-limited THz spectral envelope. The design characteristics of these coarse THz combs are limited by the saturation effect and also by the deformation of the THz pulse time-traveling within the structure. The details of the designed THz waveform synthesis from these THz multilayer spectral filters are verified by experiments using time-domain terahertz pulsed spectroscopy.