• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1047-1052
• /
• 2016

In this paper, we propose the CSLR(: Complementary Single Loop Resonators)-loaded inset fed patch antenna with a conducting reflector to improve the radiation patterns. Reflector of the proposed antenna is located below about ${\lambda}_0/4$ from the ground plane of the patch, the size is about two times of the patch. The proposed antenna is designed and fabricated on the substrate which has a dielectric constant and thickness with 2.5 and 0.787 mm, respectively. Simulation results are obtained by using the HFSS, 3D EM Solver based Finite Element Method(: FEM). The resonant frequency and matching characteristics of the antenna with reflector are substantially the same as when there is no change in the antenna without reflector, it is confirmed that radiation patterns are significantly improved by the reflector.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.989-996
• /
• 2017

The proposed directional pencil beam antenna consists of a waveguide feeder with bended elliptical conductor plate feed and a parabolic curved reflector. Two rectangular apertures located at the broad wall near the end of the feed waveguide inserted from behind the reflector are located at the focus of the reflector and emit electromagnetic energy with bended elliptical conductor plate. This plate is designed to reflect electromagnetic energy primarily and to face the main reflector. The two rectangular apertures located at the waveguide end have inwardly protruding tabs for impedance matching of the antenna system, the shape of the tabs is a truncated oval. The proposed parabolic reflector antenna has a diameter of 400 mm and a focal length of 134.23 mm. The antenna gain is 33.68 dBi at the center frequency of 16.5 GHz, the beam width is $3.3^{\circ}$ and the reflection loss is -15 dB. Using the HFSS-IE, simulation results are performed to validate the proposed antennas.

• Composites Research
• /
• v.36 no.3
• /
• pp.230-240
• /
• 2023

The deployable reflector antenna consists of 24 unit main reflectors, and is mounted on a launch vehicle in a folded state. This satellite reaches the operating orbit and the antenna of satellite is deployed, and performs a mission. The deployable reflector antenna has the advantage of reduce the storage volume of payload of launch vehicle, allowing large space structures to be mounted in the limited storage space of the launch vehicle. In this paper, structural analysis was performed on the main reflector constituting the deployable reflector antenna, and through this, the initial conceptual design was performed. Lightweight composite main reflector was designed by applying a carbon fiber composite and honeycomb core. The laminate pattern and shape were selected as design variables and a design that satisfies the operation conditions was derived. Then, the performance of the lightweight composite reflector antenna was analyzed by performing detailed structural analysis on modal analysis, quasi-static, thermal gradient, and dynamic behavior.

• The Journal of Korean Association of Computer Education
• /
• v.8 no.1
• /
• pp.65-72
• /
• 2005

In this study, we suggest a new mechanism on the design and implementation of IP Traceback system against DDos/DRDoS by Zombie and Reflector attack based on spoofed IP packets. After analysis and comparing on the state-of-arts of several IP traceback mechanisms, we can find their own pros and cons primitives. And then we performed simulations on reflector based DRDoS network packets. In first, we suggest a NS-2 based IP traceback module and implement it for finding its real DRDoS attacker. As a results, we can find advanced new IP traceback scheme for providing enhanced proactive functionality against DRDoS attack.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.237-244
• /
• 2010

In this paper, the dual parabolic cylindrical reflector systems are analyzed as the reflector system for the CATR(Compact Antenna Test Range) facility. The near-field at the test zone of the CATR is calculated by using the PO(Physical Optics) approximation. The CATR has to provide an uniform plane wave with the minimum amplitude and phase ripple and the low cross polarization. Therefore, in this paper, the near-field pattern are calculated, and the ripple and taper of the field and the cross polarization are investigated with the position of the subreflector and the test region. It is confirmed that the analysis results can be used for the design of the CATR with the dual parabolic cylindrical reflector.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.2
• /
• pp.171-175
• /
• 2017

The high-tech large warships are minimal and they are always monitored by opponents, and become primary targets when conflicts occur. The improvement in reducing susceptibility has significant importance because it is difficult for a ship to maintain mission capability and functionality once it is damaged. Ordinary decoys are effective only under the premise that the ship has already been exposed. Traditionally, for naval vessels, techniques related to the radar have been used in military stealth techniques to ensure confidentiality. The corner reflector, on the other hand, can produce rather large radar cross sections. Continued use of deceptive systems such as chaff during operations will help to improve survivability of naval ships. From this viewpoint, corner reflector was considered for making radar countermeasures and deception technology. This paper reviews the current status of corner reflector basis decoys and the technical feasibility of corner reflectors for developing structural decoys.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.826-831
• /
• 2008

This paper presents hybrid antenna(HA) design based on shaped reflector for mobile satellite communication. HA is composed of a shaped reflector and a feeder having $1{\times}8$ linear phased array, and reflector shaping method is applied for the performance optimization with minimum aperture size. And, in the feeder design, HA has another merit to minimize the manufacturing cost by optimizing the number of element. Proposed HA is designed at Ka-band and can electrically control a beam pattern within ${\pm}3^{\circ}$ in the basic angle of $+45^{\circ}$ in elevation. This antenna is designed to meet ITU-R S.465-5 for beam pattern including side-lobe level.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.207-217
• /
• 1999

When the feed of an offset reflector antenna is displaced from the focal point, the phase distortion results in the aperture field distribution, which in turn gives rise to a deviation of maximum beam, a decrease in gain, and an increase in sidelobes. In order to study these scan characteristics, an offset reflector antenna with the defocused feed is analyzed by a series expansion method using the Zernike polynomials, which can be used to calculate radiation pattern fast and exactly. And from the analyzed results, scan loss data in terms of reflector geometry are presented. And also, the BDF (beam deviation factor) expression is derived with offset reflector configuration analytically, and calculated results and simple formula of BDF are presented for determining beam deviation characteristics.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.87-94
• /
• 2003

A geometric non-linear finite element formulation of CRTS reflector subjected to displacement loads, corresponding to the successional assembly steps of the reflector, is presented in order to determine the initial static equilibrium state based on the displacement incremental method. Parametric analyses of the influence of cables and mechanical properties of the reflector on the shape error between reference and equilibrium surfaces have been studied. These results of the present study are compared with the others using Galerkin mothod and NASS 98 program to demonstrate the feasibility.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.7-12
• /
• 2001

Tbis topic is about the development of a 2-dimensional specular reflector design aid software. For a long and cylindrical shaped lamp with perfect diffusing smface, direction and quantity of reflected light flux from a specular reflector strip can be calculated consideJing reabsorption by the lamp itself. Assuming a reflector as a combination of several strip segments, the reflected flux is calculated as position, length and declination of each segment are detennined. At each step, calculated reflected flux distribution and desired flux distribution is compared graphically and numerically, so that roost optimized and efficient reflector shape can be decided by the designer. We think that this software would be useful for designing reflectors for relatively long light sources, such as fluorescent lamp, tubular high pressure sodium lamp, low pressure sodium lamp, and so on. so on.