• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.203-208
• /
• 1991

We present an analytic equation for the reflectivity spectrum of a Bragg reflector in terms of the front mirror reflectivity, due to the refractive index difference between the refractive index of outside medium and the average refractive index of Bragg reflector structures, and the reflectivity of a Bragg reflector calculated by the coupled wave method. We show that even Fresnel reflection causes the reflectivity spectrum of a bragg reflector to be very different from that of Bragg reflectors calculated by the coupled wave method. The reflectivity spectrum of a Bragg reflector is dramatically changed because the interference effect between the reflected wave from the front facet and that from the Bragg reflector is changed due to the difference of a phase change from a Bragg reflector when the sequence of layers in a Bragg reflector is changed.

• 대기
• /
• 제30권4호
• /
• pp.347-360
• /
• 2020

The automatic algorithm optimized for the Korean Peninsula was developed to detect and track the center of typhoon based on a geometrical method using high-resolution retrieved WISSDOM (WInd Syntheses System using DOppler Measurements) wind and reflectivity data. This algorithm analyzes the center of typhoon by detecting the geometric circular structure of the typhoon's eye in radar reflectivity and vorticity 2D field data. For optimizing the algorithm, the main factors of the algorithm were selected and the optimal thresholds were determined through sensitivity experiments for each factor. The center of typhoon was detected for 5 typhoon cases that approached or landed on Korean Peninsula. The performance was verified by comparing and analyzing from the best track of Korea Meteorological Administration (KMA). The detection rate for vorticity use was 15% higher on average than that for reflectivity use. The detection rate for vorticity use was up to 90% for DIANMU case in 2010. The difference between the detected locations and best tracks of KMA was 0.2° on average when using reflectivity and vorticity. After the optimization, the detection rate was improved overall, especially the detection rate more increased when using reflectivity than using vorticity. And the difference of location was reduced to 0.18° on average, increasing the accuracy.

• 제어로봇시스템학회논문지
• /
• 제18권1호
• /
• pp.62-68
• /
• 2012

In this paper, a detection method of a pedestrian safety road marking was proposed. The proposed algorithm uses laser range and reflectivity of a range finder (LRF). For a detection of crosswalk marking and stop line, the DFT (Discrete Fourier Transform) of reflectivity and cross-correlation method between the reference replica and the measured reflectivity are used. A speed bump is detected through measuring an altitude difference of two LRFs which have the different tilted angle. Furthermore, we proposed a velocity constrained a detection method of a speed bump. Finally, the proposed methods are tested in on-line, on the pavement of a road. The considered road markings are wholly detected. The localization errors of both road markings are smaller than 0.4 meter.

• 한국태양에너지학회 논문집
• /
• 제36권2호
• /
• pp.31-39
• /
• 2016

This study did quantitative comparative evaluation of changes in generation consequent on reflectivity of the protruding wall near the widow in case of application of PV window system to an apartment house. To be concrete, this study did comparative analysis of the generation of (B) through the process of composing Mock-up (A)comprising the protruding window near the window and Mock-up(B) free of nearby wall interference, and giving change to the reflectivity of the wall (Case_1~3). The analysis result showed that the difference in generation was slight in case solar radiation was less than 10,000Wh in all three conditions. On the contrary, in case solar radiation was more than 10,000 Wh, the generation as against Module(B), was analyzed to be 87~91% in Case_1(5% reflectivity), 18~60% in Case_2(85% reflectivity), and 16~71% in case_3(93% reflectivity), respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.541-543
• /
• 1995

We propose the improved threshold current ratio method to determine the reflectivity of coated facets. The carrier recombination time used in the improved threshold current ratio method depends on the value of facet reflectivities. However, the carrier recombination time used in the conventional threshold current ratio method is constant regardless of facet reflectivities. The difference between the results of the two methods increases as the reflectivity of a coated facet decreases.

• Journal of Magnetics
• /
• 제13권2호
• /
• pp.70-75
• /
• 2008

In this study, a MOKE (Magneto-optical Kerr effect) measurement method for magnetic nanostructures is proposed. Theoretically, the MOKE signal enhancement can be predicted and confirmed when an anti-reflection coated substrate is used. Since MOKE is a ratio of reflectivity and the difference between the reflectivities for two magnetic states, when the reflectivity of the substrate part is reduced by employing an anti-reflection coated substrate, MOKE signal enhancement can be achieved. The enhancement is confirmed by simple numerical MOKE calculations. When the reflectivity of an anti-reflection coated substrate is 0.7%, the calculated MOKE signal is about 79% of its bulk values for the 100-nm wide Fe nanowire with a 1500-nm radius laser beam. It was found that, for various numerical calculations, a larger MOKE signal is obtained relative to a smaller substrate reflectivity.

• 대한원격탐사학회지
• /
• 제26권4호
• /
• pp.373-385
• /
• 2010

두 대의 레이더를 이용하여 반사도를 합성할 때 중복영역을 처리하는 새로운 합성 방법을 개발하였다. 이 합성 방법은 인접한 두 레이더의 중복되는 영역의 반사도 차이를 보정한 후 가중치를 주어 합성하는 방법이다. 가중치는 CAPPI(Constant Altitude PPI) 고도와 반사도가 관측된 고도와의 차이의 비를 역으로 계산한 것이다. 이 합성방법의 결과를 분석하기 위하여 두 레이더를 이용하여 관측한 태풍 사례의 반사도장에 대해 다른 합성방법(최댓값, 평균값, 근거리, 거리 가중)과 비교하였다. 두 레이더의 중복영역의 경계지점들에 대해 반사도의 연속성과 치우침을 분석하였고 그 결과 새로운 방법이 다른 합성방법에 비해 더 우수한 결과를 얻었다.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.165-168
• /
• 2016

Surface protein internalin (InlA) is a major virulence factor of the food-borne pathogen L. monocytogenes. It plays an important role in bacteria crossing the host's barrier by specific interaction with the cell adhesion molecule E-cadherin. Study of this protein will help to find better ways to prevent listeriosis. In this study, a monoclonal antibody against InlA was used to detect InlA. The reaction was label-free and monitored in real time with an oblique-incidence reflectivity-difference (OI-RD) technique. The kinetic constants k_on and k_off and the equilibrium dissociation constant K_d for this reaction were also obtained. These parameters indicate that the antibody is capable of detecting InlA. Additionally, the results also demonstrate the feasibility of using OI-RD for proteomics research and bacteria detection.

• 대한전자공학회논문지SD
• /
• 제38권9호
• /
• pp.634-642
• /
• 2001

Buried channel 도파로와 ridge 도파로에 대하여 variational method (VM)과 유효굴절율 방법을 사용하여 2차원의 필드 분포를 구한 뒤 angular spectrum 방법을 적용하여 여러 개의 도파로 두께에 대하여 도파로 폭에 따른 단면 반사율을 계산하고 이를 비교 검토하였다. 도파로 폭에 따른 단면 반사율 변화량은 buried channel 도파로의 경우는 매우 크게 나타났으나 ridge 도파로의 경우는 buried channel 도파로의 변화량에 비해 매우 작게 나타났다. Angular spectrum 방법을 사용하여 채널 도파로 소자의 단면 반사율을 계산할 때 사용되는 2차원의 필드 분포의 정확성은 반사율 값에 큰 영향을 미침을 알 수 있었다. 유효굴절율 방법의 경우 도파로 폭과 도파로 두께가 감소할수록 필드 분포의 부정확성으로 인해 정확한 반사율 값과의 오차가 심하게 나타났다. 반면에 VM을 사용하여 구한 필드 분포는 도파로 폭과 두께에 관계없이 정확한 필드 분포와 오차가 적어 유효굴절율 방법보다 정확한 반사율 값을 구할 수 있었다. 유효굴절율 방법이 잘 적용되는 영역에서는 두 방법을 사용하여 구한 반사율의 차이가 매우 작음을 알 수 있었다.

• 대한전자공학회논문지SD
• /
• 제37권11호
• /
• pp.36-42
• /
• 2000

Buried channel waveguides의 필드 분포에 대한 analytic 표현식을 effective index method (EIM), variational method(VM)와 각각의 방향으로의 경계조건을 적용한 variational method (VM_vec)를 사용하여 구한 뒤 angular spectrum 방법을 적용하여 도파로 폭에 따른 단면 반사율을 계산하고 이를 비교 검토하였다. 도파로 폭이 커질수록 buried channel waveguides의 단면 반사율은 slab 도파로의 단면 반사율에 접근하였고 도파로 폭이 작아질수록 slab 도파로의 단면 반사율로부터 quasi-TE 모드의 단면 반사율은 감소하였고 quasi-TM 모드의 단면 반사율은 증가하였다. 도파로 폭에 따른 단면 반사율 변화량은 quasi-TM 모드보다 quasi-TE 모드에 대한 변화량이 크게 나타남을 알 수 있었다. Aspect ratio가 1일 때 VM과 VM_vec으로 구한 quasi-TE 모드와 quasi-TM 모드와 quasi-TM 모드의 반사율은 차이가 크게 나타났다. Quasi-TE 모드의 경우는 VM_vec으로 구한 필드 분포에 angular spectrum 방법을 적용하여 계산한 단면 반사율이 EIM으로 구한 반사율보다 정확한 값임을 알 수 있었고 quasi-TM 모드의 경우는 각 방법으로 구한 반사율이 거의 같음을 볼 수 있었다.