• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.27-33
• /
• 2018

We report the physical implementation of a tunable photonic microwave delay line filter based on injection locking of a single Fabry-Perot laser diode (FP-LD) to a reflective semiconductor optical amplifier (RSOA). The laser generates equally spaced multiple wavelengths and a single tapped-delay line can be obtained with a dispersive single mode fiber. The filter frequency response depends on the wavelength spacing and can be tuned by the temperature of the FP-LD varying lasing wavelength. For amplitude control of the wavelengths, we use gain saturation of the RSOA and the offset between the peak wavelengths of the FP-LD and the RSOA to decrease the amplitude difference in the wavelengths. From the temperature change of total $15^{\circ}C$, the filter, consisting of four flat wavelengths and two wavelengths with slightly lower amplitudes on both sides, has shown tunability of about 390 MHz.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.501-509
• /
• 2003

We have designed transflective liquid crystal display(LCD) associated with in-plane switching of a LC director driven by fringe-field, unlike other LCD mode. Reflective area consists of a λ/2 compensation film and a LC cell with retardation value(dΔn) of λ/4 with their optic axes making an angle of 15$^{\circ}$ and 75$^{\circ}$ against polarizer, respectively. In the transmissive area, top and bottom polarizers are parallel each other, an LC has a dΔn of λ/2, and another λ/2 compensation film is inserted between the LC cell and bottom polarizer. With the configuration, both devices show dark state initially. When an incident light is 550nm, the device shows wide-viewing-angle characteristics such that in the reflective area the contrast ratio target than 5 exists up to 55$^{\circ}$ of polar angle in all directions and in transmissive area it exists about 100$^{\circ}$ in vortical direction and 110$^{\circ}$ in horizontal direction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1529-1532
• /
• 2006

Depending on the optical design method, a novel dual-mode transflective LCD with proper LC material and optical films was developed. The design increased the optical transmittance and the reflectivity of dual-mode transflective LCDs with the proper parameters of cell gap, alignment layer and optical films. These parameters were evaluated by computer simulation. The simulation results also revealed that the transmissive and reflective states presented similar performance in the transflective LCDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.295-298
• /
• 2003

Reflective mode liquid crystal on silicon (LCoS) microdisplay is the major technology that can produce extremely high-resolution displays. A very large number of pixels can be packed onto the CMOS circuit with integrated drivers that can be projected to any size screen. Large size direct-view thin film transistor (TFT) LCDs becomes very difficult to make and to drive as the information content increases. However, the existing LC alignment technology for the LCoS cell fabrication is still the mechanical rubbing method, which is prone to have minor defects that are not visible normally but can be detrimental if projected to a large screen. In this paper, application of photo-alignment to LCoS fabrication is presented. The alignment is done by three-step exposure process. A MTN $90^{\circ}$ mode is chose as to evaluate the performance of this technique. The comparison with rubbing mode shows the performance of photo-alignment is comparable and even better in some aspect, such as sharper RVC curve and higher contrast ratio.

• 대한원격탐사학회지
• /
• 제15권3호
• /
• pp.167-175
• /
• 1999

원격탐사 관련 핵심기술은 최근에 국방, 의료영상, 환경, 지질 등과 같은 광범위한 분야에서 활용범위를 확대하고 있다. 1cm ~ 수십 cm 파장의 파를 관측하는 마이크로파 원격탐사 기술은 반사 적외선 원격탐사나 열 적외선 원격탐사 기술에 비해 날씨조건과 밤낮에 관계없이 탐사를 수행할 수 있다는 장점을 가지고 있다. 마이크로파 영상레이다인 합성 개구 레이다를 이용한 영상화 방식은 응용목적에 따라 stripmap 방식, spotlight 방식, 그리고 inverse 방식으로 구분된다. 본 논문에서는 inverse 방식으로 지상에 고정된 레이다가 비행하는 항공체를 영상화하는 기법에 대해서 기술하였다. 비행 항공체의 영상화 기법은 자동 펴적인식 시스템 구축시 중요한 기술단계이며, 최근 이 분야에 대해 활발히 연구되고 있다. 비행 항공체를 영상화하기 위해 제안된 3가지 방식인 퓨리에 처리 기법, 시간-n 주파수 처리 기법, 그리고 투시로부터 복원 기법을 소개한 후, 각 방식의 장단점을 분석하였다.

• 간호행정학회지
• /
• 제12권1호
• /
• pp.140-150
• /
• 2006

Purpose: The purpose of this study was to determine learning styles and preferred learning methods of clinical nurses. Method: Data were collected from 735 nurses at one university hospital in Seoul. Learning style inventory, a self-report questionnaire was completed by the subjects. Result: Learning styles of nurses were accommodator 35.9%, diverger 30.4%, converger 18.2%, assimilator 15.5%. Learning styles varied significantly with clinical practice area and academic background. Furthermore, RO(reflective observation) learning mode varied significantly according to the clinical practice area. AC(abstractive conceptualization) learning mode varied significantly with job position. AC and AE(active experimentation) learning modes varied significantly according to the academic background and preferred learning method. Preferred learning methods were lecture 24.8%, clinical practice 23.1%, self-directed learning 21.5%, audiovisual education 16.7%, and group discussion 13.9%. Preferred learning methods varied significantly with learning styles and career. Lecture was preferred in diverger and self-directed learning was preferred in assimilator. Clinical practice was preferred in accommodator and converger. Conclusions: This study suggested that clinical education should be applied to nurses after examining learning styles and preferred learning methods. In conclusion, to identify the nurses' learning styles could be helpful for developing the effective educational skill.

• 대한전자공학회논문지
• /
• 제5권4호
• /
• pp.36-40
• /
• 1968

새로운 반사형 텔레비젼 디스푸레이를 소개한다. 이 방법에서는 선상의 액체결정의 다이나믹 스캣터링 모오드(Dynamic Scattering Mode, DSM)를 이용하며 주위가 밝은 곳에서도 볼 수 있다. 6∼12μm 두께의 액체결정은 뜯을 수 있는 음극선관 위에 와이어-모자의 훼이스 프레이트를 사용하는 전자속으로 실시간에 번지선택된다. 두가지 종류의 액체결정물질-Anasyliden Para-Amino Phenyl Acetate(APAPA)와 RCA 특유의 실온액체결정-을 시험했는데 동작온도(APAPA는 82°∼110℃이고 다른 것은 실온)를 제외하고는 비슷한 결과가 나왔다. 사방 3.1cm의 디스푸레이에서는 해상도가 적용 텔레비젼에 필요한 150line 보다 약간 떨여졌는데 그 원인은 액정결정 때문이 아니고 모자익의 구조에 의한 제한 때문이다. 더 나은 해상도를 얻으려면 디스푸레이를 좀더 크게하면 된다. 콘트라스트는 최적화(7.5:1)하지 않았다. 그러나 이 값을 정적인 디스푸레이에서 본 바와 같이 15∼20대 1로 개선하기 위해서는 몇가지의 기술을 사용할 수 있다. 이 디스푸레이 방법의 매력으로는 적당한 외부조명하에서는 약 ±45°의 넓은 관람각을 갖는데 있다고 하겠다. 액체결정내에서 DSM이 일어나도록 하는데 필요한 전류, 전압치들을 보면 평평한 텔레비젼 화면에 적합한 완전한 번지선택법에의 근사방법이 발견될 수 있으리라는 희망을 갖일 수 있다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권5호
• /
• pp.306-309
• /
• 2016

The Cs₃Sb photocathode was formed by non-vacuum process technology. An in-situ vacuum device was fabricated successively with flat cesium antimonide photocathode emitters fabricated in a process chamber. The electrical properties of the device were characterized. Electron emission from the devices was induced by photoemitted electrons, which were accelerated by an anode electric field that was shielded from the photoemitter surface. The electrical characteristics of the devices were investigated by measuring the anode current as a function of device operation times with respect to applied anode voltages. Planar blue LED light with a 450 nm wavelength was used as an excitation source. The results showed that the cesium antimonide photocathode emitter has the potential of long lifetime with stable electron emission characteristics in panel devices. These features demonstrate that the cesium antimony photocathodes produced by non-vacuum processing technology is suitable for flat cathodes in panel device applications.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.222-226
• /
• 2011

We demonstrated the feasibility of an amplified wavelength-division multiplexed passive optical network (WDM-PON) architecture based on broadband light source (BLS) seeded optical sources and a novel bidirectional reach extender. Our bidirectional reach extender could provide an amplification of both downstream and upstream signals as well as a BLS output for the upstream WDM signal generation. An error-free 1.25 Gb/s signal transmission over a 100-km long single-mode fiber was achieved in a bidirectional WDM-PON using BLS seeded reflective semiconductor optical amplifier (RSOA) sources.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.814-817
• /
• 2006

In this paper we report the influence of rubbing direction and electrode distance to the voltage dependent transmittance in in-plane switching (IPS) mode. Moreover, we applied this to a transflective IPS cell to realize a single gamma characteristics both in the transmissive part and the reflective part..