• 제목/요약/키워드: Reflective mode

검색결과 98건 처리시간 0.024초

Development of the new structure of transflective LCD

  • Lee, Dong-Hoon;Chung, Jae-Young;Park, Gui-Bok;Chung, In-Jae
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
    • /
    • pp.203-204
    • /
    • 2000
  • We have developed 14.1" XGA transflective panel for both transmissive mode and reflective mode. We designed new panel structure, optimized optical films and adopted pixel with high aperture and high transmittance color filter. This can be applied for mobile tool and sub-note without regard to environment.

  • PDF

뽀앙까레 구면을 이용한 반사형 STN LCD의 설계 (Design of a Reflective STN LCD On the Poincare Sphere)

  • 김도연;이서헌;심사용;이기동;김재창;윤태훈
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
    • /
    • pp.140-141
    • /
    • 2001
  • 반사형 STN-LCD (supertwisted nematic liquid crystal display) 는 많은 display에서 사용되고 있는 LCD mode 중의 하나이다. 그러나 현재 많이 사용되는 반사형 STN-LCD는 그림 1과 같이 한 장의 polarizer와 두장의 retardation film을 사용하는 구조이므로 각각의 component에 대한 parameter들에 의해 display의 표시 성능이 좌우된다. 먼저 Reflective STN-LCD의 보상에 필요한 parameter를 살펴보면, 그림 1과 같이 5개 ( $\alpha$, ø$_1$, ø$_2$, 각 retarder의 retardation : Δnd$_1$, Δnd$_2$)의 parameter의 결정이 필요하다. (중략)

  • PDF

반사형 TN 액정 셀의 In-Plane스위칭 (In-Plane Switiching of a Twisted-Nematic Reflective LC Cell)

  • 정미준;곽진석;이기동;김재창;윤태훈
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
    • /
    • pp.138-139
    • /
    • 2004
  • In this paper, we propose a reflective In-Plane Switching twisted nematic mode with negative liquid crystal and weak surface anchoring energy (10$^{-6}$ J/m) in order to enhance reflectance and cellgap margin.

  • PDF

IPS 모드를 이용한 반투과형 액정 디스플레이 (Transflective Liquid Crystal Display using In-Plane Switching Mode)

  • 송제훈;임영진;이승희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
    • /
    • pp.153-156
    • /
    • 2004
  • We have studied electro-optic characteristics of transflective liquid crystal display (LCD) using in-plane switching mode. Unlike previous transflective LCD using a dual gap structure and multi driving circuit, this transflective LCD has a single gap structure and a single driving circuit. In the voltage on state, the electric field is applied horizontally to the LC directors, and then homogeneously aligned LC directors at initial state is rotated to with the electric field. But the twist angle of the LC directors in reflective area is lower than transmissive area. As a result, it is possible to design the transflective LCD with a single gap and a single driving circuit. The transflective display associated with this LC cell exhibits a wide viewing angle in both reflective and transmissive areas.

  • PDF

Development of Fast Moving Ball Actuator Mode for Novel Electronic-Paper Displays

  • Park, Hyo-Joo;Choi, Hong;Lee, Dong-Hyuck;Kim, Dong-Woo;Bae, Byung-Sung;Kim, We-Yong;Kim, Byung-Uk;Hong, Mun-Pyo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.935-936
    • /
    • 2009
  • In this paper, we describe the basic operating mechanism of our novel reflective display, Fast Moving Ball Actuator (FMBA) mode[1], using micro-sized metal coated polymer ball in fluid medium. Metal surface of the ball can be charged up by contact electrode and their locations can be controlled by applied field to obtain optically on and off state. In the medium with high viscosity, the response speed of the moving ball might be reached into their terminal velocity and changed in proportion to the frequency of applied voltage on the electrodes.

  • PDF

반사형 마이크로 미러와 다중모드 광섬유를 이용한 광마이크로폰 (Optical Microphone Incorporating a Dual-Core Multimode Fiber Block and a Reflective Micromirror)

  • 송주한;이상신
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제55권5호
    • /
    • pp.263-266
    • /
    • 2006
  • An optical microphone was developed using a dual-core multi-mode fiber block and a membrane type micromirror. The fiber block serves as a compact optical head, and the micromirror as a reflective diaphragm. The micromirror is designed to be suspended through a silicon bar connected t a frame, allowing for displacement induced by acoustic waves. The optical head is implemented by integrating two multi-mode fibers in a single block, and used to transfer light signals between it and the diaphragm. For the assembled microphone, its static characteristics were observed to reveal the operating point defined as the optimum distance between the optical head and the diaphragm. And its dynamic response was tested to exhibit a frequency bandwidth of 3 kHz with the variation of $\sim5dB$.

반사형 쌍안정 TN LC 셀의 설계 및 제작 (Design and Fabrication of a Reflective Bistable TN LCD)

  • 백흠일;장기철;이기동;윤태훈;김재창
    • 한국광학회지
    • /
    • 제10권4호
    • /
    • pp.279-282
    • /
    • 1999
  • 본 논문에서는 LCD의 어두운 상태의 특성을 보완하기 위해 광대역 λ/4 보상판을 사용하여 단일 편광판 모드 반사형 쌍안정 TN LCD를 설계·제작하였다. 단일 편광판 모드에서 광대역 λ/4 보상판의 필요성을 이론적인 계산과 실험을 통해 확인하였고, 시험적ㅇ로 제작한 단일 편광판 모드 반사형 쌍안정 TN LCD는 기존 구조의 반사형 쌍안정 TN LCD와의 비교에서 더욱 밝은 디스플레이 특성을 나타내었다. 본 실험에서 우리는 10:1의 콘트라스트를 얻었다.

  • PDF

빠른 응답과 높은 대비비의 반사형 LCD를 위한 HAN Cell (Hybrid Liquid Crystal Cell for a Fast-Response High-Contrast Reflective Display)

  • 문성훈;이기동;윤태훈;김재창
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2000년도 하계학술발표회
    • /
    • pp.234-235
    • /
    • 2000
  • 최근에 많이 사용되는 휴대용 기기의 표시장치인 액정표시장치(LCD)에는 반사형이 많이 사용되고 있다. 반사형 LCD는 전력소모의 많은 부분을 차지하는 backlight를 주변광원으로 대체하여 전력소모를 줄일 수 있는 표시장치로 많이 연구되고 있다. 특히, 반사형 LCD는 밝기면에서 우수한 single-polarizer mode가 적합하다$^{1.3}$ . 그러나 single-polarizer mode는 two-polarizer mode와 비교해서 dark 상태에서의 누설광이 많이 발생하여 대비비가 저하되는 단점이 있다. 이 점을 보완하기 위하여 전 파장 영역에서 편광판에 의해 반사광이 차단될 수 있도록 설계를 했다. (중략)

  • PDF

Highly Efficient Trans-Reflective Color Filters Incorporating TiO2-MgF2 Multilayer Stacks

  • Shrestha, Vivek Raj;Park, Chul-Soon;Koirala, Ishwor;Lee, Sang-Shin;Choi, Duk-Yong
    • Journal of the Optical Society of Korea
    • /
    • 제19권6호
    • /
    • pp.566-574
    • /
    • 2015
  • We report for the first time highly efficient trans-reflective color filters capable of demonstrating coloration in both transmission and reflection modes by taking advantage of a multilayer stack consisting of MgF2 and TiO2 used respectively as the low and high index materials. In order to enable such trans-reflective performance, securing an optimal stop band assuming an appropriate bandwidth within the visible regime is pivotal, which was realized by tailoring the thicknesses and the numbers of TiO2-MgF2 bi-layers. Three devices were designed through rigorous simulations and developed via e-beam evaporation to demonstrate vivid blue, green, and red colors in the reflection mode, and yellow, magenta, and cyan colors in the transmission mode, featuring an enhanced efficiency exceeding 90% under normal incidence. The color performance of the filters was examined by referring to the chromaticity coordinates of the transmission and reflection spectra, alongside photographed color images. The dependence of the performance on the angle of incidence was explored with respect to incident polarization, indicating that a transmission surpassing 60% could be stably maintained up to an angle of 75°. Polarization independent transfer characteristics were especially achieved for the normal incidence. The proposed devices may be readily extended to other spectral regimes by adjusting the thicknesses of the films.