• Journal of Information Display
• /
• v.12 no.3
• /
• pp.115-119
• /
• 2011

Optically isotropic liquid crystal (LC) mixture such as blue-phase LC and nanostructured LC composites exhibit the advantages of fast response time, high contrast ratio and wide-viewing angle due to the induced birefringence along the horizontal electric field. Utilizing this mixture, a novel single cell gap in-plane switching-type polymer-stabilized blue-phase transflective liquid crystal display by embedding the nanowire grid polarizer as a polarization-dependent reflective polarizer in the R region is proposed. This device can be used as a normal black mode without any quarter-wave plate or patterned in-cell phase retarder. Moreover, the transmittance is identical to the reflectance so that it will be suitable for single gamma driving. Detailed electro-optic performances, such as voltage-dependent light efficiency and viewing angle of the proposed device configuration, are investigated.

• Journal of Information Display
• /
• v.7 no.1
• /
• pp.19-24
• /
• 2006

We propose optical configurations of a double-cellgap liquid crystal cell for transflective displays with wide viewing angle and high contrast ratio. The reflective part is designed in the wide-band quarter wave structure to achieve good dark state. For the transmissive part, the compensation method is applied to achieve the super-achromatic dark state, and three switching methods are used : which are vertical switching, horizontal switching to $30^{\circ}$and horizontal switching to $120^{\circ}$, to achieve the bright state.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.814-817
• /
• 2006

In this paper we report the influence of rubbing direction and electrode distance to the voltage dependent transmittance in in-plane switching (IPS) mode. Moreover, we applied this to a transflective IPS cell to realize a single gamma characteristics both in the transmissive part and the reflective part..

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.743-746
• /
• 2006

We have demonstrated a transflective liquid crystal display (LCD) with a single cell gap in a patterned vertically aligned mode. In our configuration, the different electrode structure in a transmissive and a reflective part was suggested to compensate an optical path difference of each region. As the result, the similar electro-optic characteristic of each region was obtained which results in an enhanced performance of the device. Moreover, suggested technique can be highly effective to realize the practical transflective LCD due to the simple fabrication process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.547-550
• /
• 2003

In this paper we report the optimization method of the pattern size of the electrodes in PVA LCD for the transflective mode in order to improve the optical characteristics. Moreover, we designed the electrode of PVA LCD so as to remove the driving voltage difference between transmissive mode and reflective mode. As a result, we expect very simple manufacturing process and high optical performance even if complex process such as a multi cell gap process and multi driving method are not applied

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.962-964
• /
• 2007

A 14.1-inch reflective type Thin Film Transistor-Electric Phoretic Display was developed at the esolution of 1280 x 900 lines on plastic substrate. All of the processes of TFT were carried out below $100\;^{\circ}C$ on PES plastic films. The process conditions of TFT were optimized for large area TFT-LCD on plastic substrate. At $60^{\circ}C$ high temperature during 160hours, TFT does not delaminate and IV characteristic is also satisfied.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.567-570
• /
• 2004

We have designed a single gap transflective liquid crystal display (LCD) driven by a fringe electric field, in which the LCs are homogeneously aligned in the initial state. In the reflective and transmissive areas, the degrees of the rotation of the LC director are $22.5^{\circ}$ and $45^{\circ}$, respectively. Utilizing this mechanism and an in-cell retarder with a quarter-wave plate that is used below the LC layer, the transflective LCD using fringe-field switching (FFS) mode is realized.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.201-206
• /
• 2004

We have performed computer simulation and experiment to obtain electro-optic characteristics of reflective hybrid aligned nematic (R-HAN) cell driven by fringe field, in which the cell consists of polarizer, optical compensation film, LC layer and reflector. Conventional R-HAN cell driven by fringe field using only the LC layer shows high wavelength dispersion at dark-state and thus viewing angle characteristic is strongly wavelength-dependent. In order to improve this demerit, we added one optical compensation film to conventional R-HAN cell. The display with optimized cell parameters shows low wavelength dispersion at dark-state and exhibits a wide viewing angle without the occurrence of grey scale inversion over a wide range of viewing angles and the contrast ratio greater than 5 over exists about 120$^{\circ}$ in vortical direction and 160$^{\circ}$in horizontal direction. Experimental results show good agreements with theoretical results and fast response time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.449-449
• /
• 2007

OLED has many advantages of low voltage operation, self radiation, light weight, thin thickness, wide view angle and fast response time to overcome existing liquid crystal display (LCD)'s weakness. Therefore, It draws attention as promising display and has already developed for manufactured goods. Also, OLED is regarded as a only substitute of flexible display with a thin display. A considerable portion of the light originating film emissive centers buried in a solid film never escapes due to internal reflection at the air-film interface and is scattered as edge emission or dissipated within the solid film This is one of the major reasons why the luminous power efficiency of OLED remains low, in spite of research progress in OLED. Although several ways of overcoming this difficulty have been reported, no comprehensive method has been proposed yet. In this paper, we propose that use of anti-reflective coating layers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.405-408
• /
• 2002

In this paper, we propose a novel method to form polymer walls without accurate alignment of photomask. The method can be used to form polymer walls in reflective LCDs.