• 한국해양공학회지
• /
• 제16권3호
• /
• pp.40-45
• /
• 2002

In this study, the effects on hydraulic characteristics are discussed as the permeable underlayer thickness of the rubble mound structure changes. A series of hydraulic experiments were performed and wave run-up, reflection and set-up were investigated. Result indicated that wave run-down was affected by the water out from the permeable underlayer during down-rush. As the thickness increased, relative wave run-up decreased.

• Journal of Welding and Joining
• /
• 제14권6호
• /
• pp.37-47
• /
• 1996

An ultrasonic testing uses the directivity of the ultrasonic wave which propagates in one direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. The directivity of ultrasonic wave is related to determination of testing sensitivity, scanning pitch and defect location. This paper investigated the directivity of ultrasonic wave, which scattered from slit defect located in heat-affected zone (HAZ) in butt joint using visualization method. The directivity of shear waves scattered from slit defect were different according to probe direction (far defect, near defect) and probe position (forward movement, maximum echo position, backward movement). The difference of directivity of reflection wave was existed between 2 MHz and 4 MHz angle probes. In the case of 2 MHz angle probe, the directivity of reflection wave was appeared sharp form because of the relation wave length and defect size.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.655-658
• /
• 1995

Recently years, these has been considerable interst in analysis of stress under shock wave. Stress wave is important problem for mechanical device and structural design. This paper was studied to develope the finite element program to analysis single materials and composite materials. This paper is studied for the stress wave propagation of single materials and predicted reflection of stress wave in materials. the developed program was able to analysis of stress wave propagation of composite materials and descride reflection of stress wave at contact surface.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.39-46
• /
• 2010

The calmness inside a harbor plays an important role in the appropriate disposition of harbor structures. However, it is not easy to acquire accurate computational results because these are affected by many factors concerned with wave transformation. Recently, numerical model tests, which are quicker and more economical than hydraulic model experiments, were carried out for the purpose of analyzing wave height distributions in harbors. This paper presents a numerical model that is able to calculate wave heights inside a harbor. It is based on a time-dependent mild slope involving wave refraction, diffraction, shoaling effect, and reflection. In particular, arbitrary reflectivity is used at the boundary in order to simulate the real harbor reflection condition. The proposed numerical model is applied to Samcheon new-harbor in order to investigate harbor calmness.

• 한국해안해양공학회지
• /
• 제15권1호
• /
• pp.11-20
• /
• 2003

본 논문에서는 규칙파 모델을 이용하여 유공케이슨 방파제로부터의 불규칙파의 반사를 계산하는 몇 가지 방법들을 검토한다. 첫 번째 방법은 불규칙파를 파고 및 주기가 각각 불규칙파의 제곱평균제곱근 파고 및 유의주기와 같은 규칙파로 근사하는 것이다. 두 번째는 불규칙파 스펙트럼의 각 주파수 성분에 대하여 규칙파 모델을 반복적으로 사용하는 것이다. 파의 주기는 성분파의 주파수에 따라 결정되며, 모든 주파수에 대해서 제곱평균제곱근 파고를 사용한다. 세 번째 방법은 두 번째 방법과 같으나, 각 성분파의 에너지에 해당하는 파고를 사용한다. 이전 연구자들의 실험 결과와 비교해 본 결과, 두 번째 방법이 가장 타당하며, 주파수 평균 반사율과 반사파 스펙트럼 모두 실험치와 양호한 일치를 보였다.

• 한국해안해양공학회지
• /
• 제13권4호
• /
• pp.263-272
• /
• 2001

최근 우리나라에서는 slit형 케이슨을 적용한 방파제 건설이 시도되고 있다. slit 케이슨 방파제는 수심이 비교적 깊은 해역에 적절하며, 다수의 실험적.이론적 연구가 수행되었다. 본 연구에서는 불규칙파를 적용한 2차원 수리모형실험을 실시하여 종 slit형 케이슨 방파제의 반사특성을 검토하였다. 실험은 단일 유수실과 이중 유수실을 가지는 종 slit형 케이슨 방파제에 대해 유공율, 유수실의 폭 및 slit의 수 등을 달리한 여러 가지 실험안을 설정하여 수행하였다. 실험결과에 의하면, 파형경사가 작을수록 반사율은 크게 나타남을 알 수 있다. 그리고 규칙파를 적용한 기존 연구결과에 의하면 상대유수실 폭 (B/L)이 0.2-0.25 부근에서 최소 반사율을 보였으나, 불규칙파를 적용한 본 연구에서는 B/L$_{s}$ ,=0.13~0.15 범위에서 최소의 반사율을 보였다. 또한 동일한 유공율 조건에서 slit의 폭이 클수록 반사율이 낮게 나타났으며, 전체적으로 단일 유수실보다 이중 유수실의 경우가 소파효과가 우수하였다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.141-144
• /
• 2000

We report on the influence of d-wave pairing symmetry in high-T$_c$ superconductor by tunneling spectroscopy. The zerobias conductance peak(ZBCP) which is produced by tunneling through the ab-plane is observed on both of metal Au/YBa$_2$Cu$_3$O$_y$(N/S) tunnel junctions and ferromagnet Co/Au/ YBa$_2$Cu$_3$O$_y$(F/N/S) tunnel junctions. The effects of Andreev reflection on the differential conductance of each junctions are dependent on the tunnel direction. For the S/N/F junction, it appears the suppression of the ZBCP due to the suppression of Andreev reflection at the interface between a ferromagnetic material and a d-wave superconductor. By comparing these experimental results with recent theoretical works on Andreev reflection, the existence of Andreev bound state is verified in high-T$_c$ superconductor, due to the d-wave symmetry of the pair potential.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.349-354
• /
• 2001

The present study addresses the open end correction associated with the reflection and discharge phenomena of a weak shock wave from an open end of a duct. The open end correction of the weak shock wave is investigated experimentally and by numerical computation. An experiment is made using a simple shock tube with an open end, and computation is performed to simulate the experimental flow field using the unsteady, axisymmetric, compressible, flow governing equations. The results obtained show that an open end correction should be involved for shock wave discharge and reflection problems generated from the exit of the duct with an open end baffle plate. With a baffle plate less than three times the duct diameter, it is found that the open end correction is a function of both the diameter of the baffle plate and normal shock wave magnitude. However, for a baffle plate larger than three times the duct diameter, it is independent of the baffle plate diameter. The present computations predict the results of shock tube experiment with good accuracy. A new empirical equation for prediction of the open end correction is found for the weak shock reflection and discharge phenomena occurring at the open end of the duct with and without a baffle plate.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권1호
• /
• pp.44-54
• /
• 2015

Breakwaters are the coastal structures constructed either perpendicular (shore connected) or parallel (detached) to the coast. The main function of breakwater is to create a tranquil medium on its leeside by reflecting the waves and also dissipating the wave energy arriving from seaside, resulting in ease of manoeuvrability to boats or ships to their berthing places. Different types of breakwaters are being used at present, such as rubble mound breakwater, vertical wall type breakwater and composite breakwater. The objective of this paper is to investigate reflection coefficients (Kr) and dissipation (loss) coefficients (Kl) for physical models of Quarter circle caisson breakwater of three different radii of 0.550 m, 0.575 m and 0.600 m with S/D ratio of 2.5 (S=spacing between perforations, D=diameter of perforations). The models were tested in the monochromatic wave flume of the department, for different incident wave heights (Hi), Wave periods (T) and water depths (d). It was observed that reflection coefficient increased with increase in the wave steepness (Hi/gT2) and decreased with increase in depth parameter (d/gT2) and hs/d (Height of structure including rubble base/depth of water). The loss coefficient decreased with increase in the wave steepness and increased with increase in depth parameter and hs/d.

• 한국해양공학회지
• /
• 제27권6호
• /
• pp.90-94
• /
• 2013

This paper reports the results obtained for there flection and transmission coefficients on rubble mound breakwaters in Busan Yacht Harbor. A2D physical model test was conducted in the wave flume at the Coastal Engineering Research Laboratory at Pusan National University, Busan, South Korea. In this study, physical model tests were completed to further our understanding of the hydrodynamic processes that surround a rubble mound structure subjected to irregular waves. In particular, the reflection and transmission coefficients, as well as the spectrum transformation, were analyzed. This analysis suggests that with an increase in wave height around a rubble mound, the reflection coefficient drastically increases at each water level (HHW or MSL or LLW). Moreover, when the water level changes from HHW to LLW, the reflection coefficient is suddenly reduced. A further result of the analysis is that the transmission coefficient strongly drops away from the rear of the structure. Finally, in regard to the rubble mound breakwater in Busan Yacht Harbor, a consideration of the reflection and transmission coefficients plays an important role in the design.