• 제목/요약/키워드: Reflection free zone

검색결과 12건 처리시간 0.029초

음향조정실에서 적절한 초기지연시간을 갖는 무반사지역의 설계연구 (Design for the Reflection Free Zone with the Adequate Initial Time Delay Gap at the Control Room)

  • 이에스더
    • 한국음향학회지
    • /
    • 제26권1호
    • /
    • pp.32-41
    • /
    • 2007
  • 엔지니어의 모니터링 위치가 한 지점에만 한정되어 있는 음향조정실의 기존개념을 여러 사람이 동시에 작업할 수 있는 지역적인 방식으로 개선하였다. 이를 위하여, Davis의 $LEDE^{TM}$ 방식을 도입하였고, 내부의 구조 및 흡음재료의 특성, 확산기 및 저역흡음기의 설치와 음상법 등을 활용하여 초기시간지연을 제어하였다. 따라서 여러 엔지니어들이 서로 유사한 음향특성 하에서 동시에 소리를 모니터링 할 수 있는 무반사지역을 형성시켰다. 뿐만 아니라, 음향조정실 (특히 무반사지역) 안에서 정재파, 음향초점, 컬러링, 하스효과 그리고 플러터 에코 등의 발생을 억제하거나 크게 감소시킬 수 있었다.

가스하이드레이트 탄성파 자료의 복소분석 (Complex Analyses for Gas Hydrate Seismic Reflection Data)

  • 도안 후이 히엔;장성형;김영완;서상용
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 추계학술대회 논문집
    • /
    • pp.208-212
    • /
    • 2008
  • Gas hydrate has been paid attention to study for because: 1) it can be considered as a new energy resources; 2) one of reasons causing the instability of sea floor slope and 3) a factor to the climate change. Bottom simulating reflector (BSR) defined as seismic boundary between the gas hydrate and free gas zone has been considered as the most common evidence in the seismic reflection data for the gas hydrate exploration. BSR has several characteristics such as parallel to the sea bottom, high amplitude, reducing interval velocity between above and below BSR and reversing phase to the sea bottom. Moreover, instantaneous attribute properties such as amplitude envelop, instantaneous frequency, phase and first derivative of amplitude of seismic data from the complex analysis could be used to analyze properties of BSR those would be added to the certain properties of BSR in order to effectively find out the existence of BSR of the gas hydrate stability zone. The output of conventional seismic data processing for gas hydrate data set in Ulleung basin in the East sea of Korea will be used for complex analyses to indicate better BSR in the seismic reflection data. This result of this analysis implies that the BSR of the analyzed seismic profile is clearly located at the two ways time (TWT) of around 3.1 seconds.

  • PDF

울릉분지 서부에서의 탄화수소 생성 및 지표 (Hydrocarbon generation and indicator in the western Ulleung Basin)

  • 류병재;김지훈;이영주;;;김일수
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 춘계학술대회
    • /
    • pp.507-510
    • /
    • 2007
  • Piston cores retrieved from the western Ulleung Basin, East Sea were analyzed to examine the potential for hydrocarbon generation and to determine the hydrocarbon indicators. 2D multi-channel reflection seismic and Chirp data were also investigated for mapping and characterizing the geophysical hydrocarbon indicators such as BSR (bottom simulating reflector), blank zone, pock-mark etc. High organic carbon contents and sedimentation rates that suggest good condition for hydrocarbon generation. High pressure and low temperature condition, and high residual hydrocarbon concentrations are favor the formation of natural gas hydrate. In the piston cores, cracks generally oriented to bedding may indicate the gas expansion. The seismic data show several BSRs that are associated with natural gas hydrates and underlying free gas. A number of vertical to sub-vertical blank zones were well identified in the seismic sections. They often show the seismic pull-up structures, probably indicating the presence of high velocity hydrates. Numerous pockmarks were also observed in the Chirp profiles. They may indicate the presence of free gas below the hydrate stability zone as well.

  • PDF

NUMERICAL SIMULATION OF TWO-DIMENSIONAL FREE-SURFACE FLOW AND WAVE TRANSFORMATION OVER CONSTANT-SLOPE BOTTOM TOPOGRAPHY

  • DIMAKOPOULOS AGGELOS S;DIMAS ATHANASSIOS A
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2005년도 학술발표회(2)
    • /
    • pp.842-845
    • /
    • 2005
  • A method for the numerical simulation of two-dimensional free-surface flow resulting from the propagation of regular gravity waves over topography with arbitrary bottom shape is presented. The method is based on the numerical solution of the Euler equations subject to the fully nonlinear free-surface boundary conditions and the appropriate bottom, inflow and outflow conditions using a hybrid finite-differences and spectral-method scheme. The formulation includes a boundary-fitted transformation, and is suitable for extension to incorporate large-eddy simulation (LES) and large-wave simulation (LWS) terms for turbulence and breaking wave modeling, respectively. Results are presented for the simulation of the free-surface flow over two different bottom topographies, with constant slope values of 1:10 and 1:20, two different inflow wave lengths and two different inflow wave heights. An absorption outflow zone is utilized and the results indicate minimum wave reflection from the outflow boundary. Over the bottom slope, lengths of waves in the linear regime are modified according to linear theory dispersion, while wave heights remain more or less unchanged. For waves in the nonlinear regime, wave lengths are becoming shorter, while the free surface elevation deviates from its initial sinusoidal shape.

  • PDF

무선전력 통신네트워크를 위한 Backscatter 통신 (Backscatter Communication for Wireless-Powered Communication Networks)

  • 최신혁;김동인
    • 한국통신학회논문지
    • /
    • 제40권10호
    • /
    • pp.1900-1911
    • /
    • 2015
  • 본 논문에서는 무선 센서 네트워크 환경에서 전력의 제약이 있는 센서들의 장거리통신을 가능케 하는 backscatter 통신에 대해 소개하고, 이를 접목해 무선전력 통신네트워크(wireless-powered communication networks, WPCN)의 doubly near-far 문제를 해결하는 방안을 논의한다. Backscatter에 기반한 WPCN에서 유저들은 하이브리드 엑세스 지점으로부터 전송되는 신호와 반송파 송신기로부터 전송되는 반송파 신호로부터 에너지를 수집한 후, 주파수 편이 변조를 이용한 반송파 신호의 반사를 통해 정보를 전송하게 된다. 위의 통신환경에서 energy-free 조건과 신호대 잡음비 outage 영역을 정의한다. 또한 본 논문에서는 에너지 수집과 정보 전송을 위한 최적의 시간 할당 방법을 제안하고, 이를 통해 시스템 전체의 정보전송 효율을 최대화할 수 있는 backscatter 기반의 수집 후 전송 프로토콜을 설계한다. 실험결과를 통해 제안한 backscatter 기법이 종래의 WPCN에 비해 광범위한 서비스 영역과 축소된 신호대 잡음비 outage 영역을 갖는 것을 보였고, 정보전송 효율을 최대화할 수 있음을 보였다.

Hawaii 동남부 심해저 분지에 대한 지구물리학적 연구 : 중력, 자력 및 탄성파 탐사 (A Geophysical Study of a Deep sea basin southeast of the Hawaiian Island: Gravity, Magnetic, and Seismic Profiling)

  • 서만철;박찬홍
    • 한국해양학회지
    • /
    • 제26권1호
    • /
    • pp.1-12
    • /
    • 1991
  • 적도 북동 태평양 클래리언-클리퍼톤 변환단층대 사이의 망간탐사 구역에 대하여 중력, 자력 및 탄성파탐사를 포함한 종합적인 지구물리탐사가 수행되었다. 해저면에 발달된 해저산이나 동서방향의 해저구릉들은 최고 20 mgal의 양의 Free-air 중력 이 상을 보여준다. 해산부근에서의 음의 Bouguer 및 Residual 중력이상치는 해산하부에 주위의 해양지각보다 낮은 밀도의 암석이 존재함을 시사한다. 자력이상대가 발견되지 않는 사실과 동서방향의 극성변화없는 미약한 자력이상치는 본 조사지역이 백악기말의 Magnetic Quiet Zone에 속함을 의미하며 또 남쪽 조사구역의 동서방향으로 100 km 이 상 떨어진 해산들에서 공통적으로 발견되는 양의 자기이상치는 이들 해산들이 발견되 지 않은 단층대를 따라 좌향이동 되었을 가능성을 보여준다. 조사구역내의 퇴적암층은 태평양 분지내 다른 지역과 동일한 탄성과 반사특성을 보이며 세 층으로 나누어 진다. 퇴적암층은 약 200-400 m의 두께를 보이며, 해산 등의 험한 해저지형을 갖는 남쪽이 평탄한 북쪽보다 두꺼운 퇴적층을 보인다. 망간단괴들은 남쪽지역의 해산이 발달되고 Unit I의 두께가 100 m 이상되는 지역에 가장 많이 분포한다.

  • PDF

동해 울릉분지 북서지역 가스하이드레이트 부존 지시자의 탄성파 속성 분석 (Seismic Attribute Analysis of the Indicators for the Occurrence of Gas Hydrate in the Northwestern Area of the Ulleung Basin, East Sea)

  • 김경진;이보연;강년건;유동근;신국선;조영호
    • 지구물리와물리탐사
    • /
    • 제17권4호
    • /
    • pp.216-230
    • /
    • 2014
  • 동해 울릉분지 북서 해역에서 취득한 3차원 탄성파 탐사자료의 해석에 의하면 연구해역 내 천부퇴적층은 광역반 사면에 의해 분리되는 5개의 탄성파 단위로 구분되며, 다수의 단층을 수반하는 배사구조가 발달한다. 가스하이드레이트 안정영역 내에는 높은 RMS 진폭을 보이는 해저모방반사면과 낮은 RMS 진폭을 보이는 음향공백대가 특징적으로 분포한다. 탄성파 속성 분석에 의하면 가스하이드레이트와 자유가스가 동시에 부존한 경우 그 경계를 따라 순간진폭이 높게 나타나며 하부에서 순간주파수가 급격히 감소한다. 반면 가스하이드레이트만 존재하는 경우에는 하부에서 순간진폭이 낮고 순간주파수가 감소하지 않는다. 해저모방반사면의 주파수 성분 분해 결과 특정 고주파수 영역에서 나타나는 강한 진폭은 하부 자유가스에 의한 튜닝효과를 지시한다. 가스하이드레이트, 자유가스 및 퇴적층의 경사를 고려한 네 가지 가스하이드레이트 부존모델을 제시하고 그 특징을 기술하였다.

판형 유전체의 유전율 측정 방법 (Method for Measuring Dielectric Constant of Planar Dielectric Substrate)

  • 이창현;권택선;이정해
    • 한국전자파학회논문지
    • /
    • 제29권10호
    • /
    • pp.799-804
    • /
    • 2018
  • 본 논문에서는 일반 측정환경에서 자유공간 물질상수 측정법을 사용한 판형 유전체의 유전율 측정 방법을 제안한다. 측정에는 회로망분석기와 동일한 두 개의 혼 안테나가 S-parameter 측정을 위해 사용되었으며, 측정 결과로부터 판형 유전체의 투과 및 반사계수를 계산하였다. 정밀한 측정을 할 수 없는 환경에서 신뢰할 수 있는 유전율을 얻기 위하여 상대적으로 측정 환경에 의한 측정불확도가 작은 투과계수의 크기만을 유전율 추정에 이용하였으며, 최종적으로 다양한 주파수에서 측정된 결과를 비교하여 유전율을 특정하였다.

가스 하이드레이트 부존층의 구조파악을 위한 탄성파 AVO 분석 AVO모델링, AVO역산 (Seismic AVO Analysis, AVO Modeling, AVO Inversion for understanding the gas-hydrate structure)

  • 김건득;정부흥
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.643-646
    • /
    • 2005
  • The gas hydrate exploration using seismic reflection data, the detection of BSR(Bottom Simulating Reflector) on the seismic section is the most important work flow because the BSR have been interpreted as being formed at the base of a gas hydrate zone. Usually, BSR has some dominant qualitative characteristics on seismic section i.e. Wavelet phase reversal compare to sea bottom signal, Parallel layer with sea bottom, Strong amplitude, Masking phenomenon above the BSR, Cross bedding with other geological layer. Even though a BSR can be selected on seismic section with these guidance, it is not enough to conform as being true BSR. Some other available methods for verifying the BSR with reliable analysis quantitatively i.e. Interval velocity analysis, AVO(Amplitude Variation with Offset)analysis etc. Usually, AVO analysis can be divided by three main parts. The first part is AVO analysis, the second is AVO modeling and the last is AVO inversion. AVO analysis is unique method for detecting the free gas zone on seismic section directly. Therefore it can be a kind of useful analysis method for discriminating true BSR, which might arise from an Possion ratio contrast between high velocity layer, partially hydrated sediment and low velocity layer, water saturated gas sediment. During the AVO interpretation, as the AVO response can be changed depend upon the water saturation ratio, it is confused to discriminate the AVO response of gas layer from dry layer. In that case, the AVO modeling is necessary to generate synthetic seismogram comparing with real data. It can be available to make conclusions from correspondence or lack of correspondence between the two seismograms. AVO inversion process is the method for driving a geological model by iterative operation that the result ing synthetic seismogram matches to real data seismogram wi thin some tolerance level. AVO inversion is a topic of current research and for now there is no general consensus on how the process should be done or even whether is valid for standard seismic data. Unfortunately, there are no well log data acquired from gas hydrate exploration area in Korea. Instead of that data, well log data and seismic data acquired from gas sand area located nearby the gas hydrate exploration area is used to AVO analysis, As the results of AVO modeling, type III AVO anomaly confirmed on the gas sand layer. The Castagna's equation constant value for estimating the S-wave velocity are evaluated as A=0.86190, B=-3845.14431 respectively and water saturation ratio is $50\%$. To calculate the reflection coefficient of synthetic seismogram, the Zoeppritz equation is used. For AVO inversion process, the dataset provided by Hampson-Rushell CO. is used.

  • PDF

탄성파 자료에서 나타난 울릉분지내 가스수화물의 증거와 특성 (Seismic Evidence and Characteristics of Gas Hydrate in the Ulleung Basin)

  • 김한준;주형태;구남형;유동근;석봉출;유해수;이호영;박근필
    • 지구물리와물리탐사
    • /
    • 제11권2호
    • /
    • pp.148-152
    • /
    • 2008
  • 동해에서 얻은 다중채널 탄성파 프로파일에서 울릉분지의 해저평원에 강한 bottom simulating reflector (BSR)가 해저면에서 왕복주시로 약 210 ms 아래에 존재하는 것을 볼 수 있다. 이 BSR은 주변의 층서를 자르고 진폭이 매우 크며 해저면 반사신호에 대해 극성이 반대이므로 가스수화물 안정영역의 기저(BHSZ)를 나타낸다고 볼 수 있다. BSR의 반사계수는 -0.23에서 -0.26으로 매우 높은데 해저면 반사계수의 1.5${\sim}$1.7배이며 그 아래 구간속도가 800 m/s 이하로 감소한다. 이러한 특징은 BHSZ 아래에 가스가 존재하는 것을 지시한다. BSR의 깊이로부터 추정한 지열은 $95{\sim}98mW/m^2$로서 지금까지 측정된 값과 잘 일치한다. 따라서 BSR은 울릉분지에서 광역적인 지열의 분포를 추정하는 데에 유용하게 쓰일 수 있다.