• The Journal of the Acoustical Society of Korea
• /
• 제25권1E호
• /
• pp.1-7
• /
• 2006

This study examines the reflection characteristic of a thin transition layer of the ocean bottom showing variability with respect to depth. In order to model the surficial sediment simply, we reduce the Biot model to the depth dependent wave equation for the pseudo fluid using the fluid approximation (weak frame approximation). From the reduced equation, the difference between the inherent frequency dependency of the reflection and the frequency dependency resulting from a thin transition layer is investigated. Using Tang's depth porosity profile model of the surficial sediment [D. Tang et al., IEEE J. Oceanic Eng., vol.27(3), 546-560(2002)], we numerically simulated the reflection loss and investigated the contribution from both frequency dependencies. In addition, the effects of different sediment type and varying depth structure of the sediment are discussed.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.349-352
• /
• 2007

Estimating the physical properties of the survey area and mapping the geotechnical basement play an important role in ocean engineering and construction field. In this study, we performed marine seismic reflection and refraction survey as an engineering application at shallow marine. We made use of the dual boomer - single channel streamer as a source-receiver in reflection seismic survey and air-gun source - the manufactured OBC(Ocean Bottom Cable)-type streamer in refraction survey. In the seismic reflection data, we could easily find the geological layers and basement. Moreover, seismic refraction data could present sediment thickness and velocity distribution.

• 대한전자공학회논문지
• /
• 제24권5호
• /
• pp.868-873
• /
• 1987

Holographic diffraction gratings which are the core element of the optical instruments such as a spectrophotometer have been fabricated using the photoresist as a recording material. A 488nm line from an argon laser is used in making the gratings. Transmission type surface-relief phase grating and reflection type which is fabsricated by coating the aluminum on the transmission type with thickness 2000\ulcornerare fabricated, the spatical frequency of which are 1200 lines/mm. Diffraction efficiency, scattered light and wave-front aberratin are measured to test the performance of the developed gratings. A marimum diffraction efficiency is given when light is incident at the Bragg angle. Theoretical efficiency is about 80%, but measured efficiency of the transmission type and reflection type is 50% and 45%, respectively.

• Journal of Ship and Ocean Technology
• /
• 제4권1호
• /
• pp.28-36
• /
• 2000

Numerical simulation based on the superposition of ring waves generated by the linear periodic source distributions for the plunger type wave maker was accomplished. The characteristics of directional spreading function were investigated. Mirror images are also introduced to consider reflections of side-wall together with the reflection coefficient to account for the imperfect reflection from the real side wall in the long experimental towing tank. Unexpected spurious waves, resulting from the combined effect of finite breadth of segmented wave maker, wavelength and main wave maker, wavelength and main wave propagating direction, were observed in the line source method and also in the analysis of the directivity. The influence of spurious waves to the directional spreading function was also investigated.

• 한국안전학회지
• /
• 제36권2호
• /
• pp.26-31
• /
• 2021

Buildings with glass curtain walls have become popular due to their appealing aesthetics and ability to let in natural light. However, light reflection from the glass surface is unavoidable in these buildings. In particular, the reflection of light from the glass envelope can create afterimage glare, a hazard to nearby drivers and pedestrians. Despite this potential danger, glare from buildings with curtain walls has not been well-studied. Hence, we analyzed the effect of light reflection on glare around a glass-enclosed skyscraper, depending on its surface reflectance. We investigated the potential hazard of glare to drivers using a commercially available software program. The results indicate that the direction of light reflection is distinctive when the incident angle of solar light increases. Moreover, this light reflection is high enough to induce an afterimage to drivers and pedestrians near the building. We found that keeping the reflectance of the building surface under 3% is required to minimize the afterimage hazard to drivers. Consequently, we recommend managing glass reflectance and installing additional traffic safety systems to reduce traffic accidents near curtain wall buildings.

• 전자공학회논문지A
• /
• 제30A권10호
• /
• pp.33-40
• /
• 1993

A reflection type 16x8 S-SEED array from LP(Low Pressure)-MODVD-grown GaAs/AlGaAs extremely shallow quantum well(ESQW) structures, with 4% Al fraction, has been fabricated. Its intrinsic region consists of 50 pairs of alternating 100.angs. GaAs and 100.angs. $Al_{0.04}$Ga$_{0.96}$As layers. A multilayer reflector stack of $Al_{0.04}$/Ga$_{0.96}$ As(599$\AA$)/AlAs(723$\AA$) was incorporated for the reflection plane below the p-i-n structures. The device processing after the MOCVD growth includes the mesa etching, isolation etching, insulator deposition, p & n metallization, and AR(Anti-Reflection) coating. For switching characteristics of the S-SEED in the form of p-i-n ESQW diode, the maximum optical negative resistance was observed at 856nm. Reflectance measurements showed a change from 15.6% to 43.3% for +0.9V to -6V bias. The maximum contrast ration of the S-SEED array was 2.0 and all the 128 devices showed optical bistability with contrast ratios over 2.4 at 5V reverse bias.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.1996-2001
• /
• 2012

본 시각 검사시스템은 전자 부품과 같이 잘 형성된 표면 재료에 널리 사용되고 있다. 반사 능력이 나쁜 재료의 경우, 시각 검사시스템이 도입될 때 많은 문제점이 발생한다. 혼합 생산 라인에서 진위의 모델을 알 수 없을 때 저 반사비와 많은 노이즈에도 잘 작동할, 강인한 시각 검사시스템을 개발하였다. 유형을 인식하기 위하여 k-means를 이용한 작업물 인식 기법이 제안되었다. 인식 유형에 기반하여 active contour라는 노이즈에 강인한 분할 기법이 영상에서 특징을 분할하는데 응용되었다. 오차 변화를 조정하는데 Kalman 필터가 사용되었다. 자동시각 검사시스템의 실험은 프로젝터를 이용한 수작업 측정의 정확도 수준을 보여준다.

• 한국해안해양공학회지
• /
• 제13권4호
• /
• pp.263-272
• /
• 2001

최근 우리나라에서는 slit형 케이슨을 적용한 방파제 건설이 시도되고 있다. slit 케이슨 방파제는 수심이 비교적 깊은 해역에 적절하며, 다수의 실험적.이론적 연구가 수행되었다. 본 연구에서는 불규칙파를 적용한 2차원 수리모형실험을 실시하여 종 slit형 케이슨 방파제의 반사특성을 검토하였다. 실험은 단일 유수실과 이중 유수실을 가지는 종 slit형 케이슨 방파제에 대해 유공율, 유수실의 폭 및 slit의 수 등을 달리한 여러 가지 실험안을 설정하여 수행하였다. 실험결과에 의하면, 파형경사가 작을수록 반사율은 크게 나타남을 알 수 있다. 그리고 규칙파를 적용한 기존 연구결과에 의하면 상대유수실 폭 (B/L)이 0.2-0.25 부근에서 최소 반사율을 보였으나, 불규칙파를 적용한 본 연구에서는 B/L$_{s}$ ,=0.13~0.15 범위에서 최소의 반사율을 보였다. 또한 동일한 유공율 조건에서 slit의 폭이 클수록 반사율이 낮게 나타났으며, 전체적으로 단일 유수실보다 이중 유수실의 경우가 소파효과가 우수하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권2호
• /
• pp.55-62
• /
• 2005

The optical CT was developed to use twisted fibers for 170 kV GIS. The fiber sensor optimized on the optical CT was wound 3 turns and twisted 4 times per a turn at the pipe with a diameter of 130 mm. The measurement error for the linearity which was satisfied the criterion of 'IEC Class-1.0' was less than ± 0.44 % at the transmission type and ± 0.82 % at the reflection type to 2,000 A. At a low current to 200 A, the measurement error was ± 0.69% at the transmission type and ± 1.38 % at the reflection type.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2009년도 특별 심포지엄
• /
• pp.73-87
• /
• 2009

Geophysical survey for unconformity-type uranium deposit applied to this study area in Athabaska Basin, Canada were carried out airborne TEM and magnetic, resistivity-induced polarization (DC-IP), puser seismic reflection and well-logging method. The results of airborne survey interpreted the lithological boundary, geological structures, and conductors. Also, these results decided to main targets for ground DC-IP survey. The Low resistivity and the high chargeability slices of 3D modeling interpreted from DC-IP survey response for conductors related to hydrothermal alteration zones and fault-controlled graphitic zones occurring at the unconformity-type uranium deposit, and they confirmed by diamond drilling. Seismic results interpreted to lake bottom surface, alluvium layer and intra-sandstone faults. We suggest the resonable field data acquisition of DC-IP method on the land or the lake in Athabaska Basin.