• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.154-157
• /
• 2011

Hydrogenated silicon nitride deposited by LF-PECVD is commonly used for anti-reflection coating and passivation in silicon solar cell fabrication. The deposition of the optimized silicon nitride on the surface is elemental in crystalline silicon solar cell. In this work, the carrier lifetimes were measured while the thicknesses of $SiN_x$ were changed from 700 ${\AA}$ to 1150 ${\AA}$ with the gas flow of $SiH_4$ as 40 sccm and $NH_3$ as 120 sccm,. The carrier lifetime enhanced as the thickness of $SiN_x$ increased due to improved passivation effect. To study the characteristics of $SiN_x$ with various gas ratios, the gas flow of $NH_3$ was changed from 40 sccm to 200 sccm with intervals of 40 sccm. The thickness of $SiN_x$ was fixed as 1000 ${\AA}$ and the gas flow of $SiH_4$ as 40 sccm. The refractive index of SiNx and the carrier lifetime were measured before and after heat treating at $650^{\circ}C$ to investigate their change by the firing process in solar cell fabrication. The index of refraction of SiNx decreased as the gas ratios increased and the longest carrier lifetime was measured with the gas ratio $NH_3/SiH_4$ of 3.

• 문화기술의 융합
• /
• 제6권4호
• /
• pp.727-732
• /
• 2020

본 연구에서는 1.55um의 파장을 갖는 DFB 레이저에서 굴절률 격자와 이득 격자가 동시에 존재할 때, 오른쪽 거울 면에 반사가 일어나지 않도록 유전막 코팅을 하여 𝜌_r=0 이 되도록 하였다. δL > 0인 경우일 때, 문턱에서 발진 모드에 대하여, 발진 이득과 종 방향으로의 발진 모드의 빔 분포와 방사전력비 P_l/P_r를 𝜌_l의 위상=π인 경우와 𝜌_l의 위상=π/2인 경우에 대하여 비교했다. 𝜌_l의 위상=π인 경우, 낮은 문턱 전류와 높은 주파수 안정성을 얻기 위해서는, κL이 8보다 커야 한다. 𝜌_l의 위상=π/2인 경우, κL = 4보다 커지면서 𝜌_l의 위상=π인 경우보다 발진 이득이 낮아지기 시작함을 볼 수 있고, 발진 모드의 문턱 전류를 낮추고 주파수 안정성을 높이기 위해서는, κL이 8보다 커야한다.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.820-824
• /
• 2014

TiNOx multi-layer thin films on aluminum substrates were prepared by DC reactive magnetron sputtering method. 4 multi-layers of $TiO_2$/TiNOx(LMVF)/TiNOx(HMVF)/Ti/substrate have been prepared with ratio of Ar and ($N_2+O_2$) gas mixture. $TiO_2$ of top layer is anti-reflection layer on double TiNOx(LMVF)/TiNOx(HMVF) layers and Ti metal of infrared reflection layer. In this study, the crystallinity and surface properties of TiNOx thin films were estimated by X-ray diffraction(XRD) and field emission scanning electron microscopy(FE-SEM), respectively. The grain size of TiNOx thin films shows to increase with increasing sputtering power. The composition of thin films has been investigated using electron probe microanalysis(EPMA). The optical properties with wavelength spectrum were recorded by UV-Vis-NIR spectrophotometry at a range of 200~1,500 nm. The TiNOx multi-layer films show the excellent optical performance beyond 9% of reflectance in those ranges wavelength.

• 지구물리와물리탐사
• /
• 제26권4호
• /
• pp.199-210
• /
• 2023

CO₂ 주입 후 저류층은 암석물리 특성이 변하므로 이 연구에서는 저류층을 물성이 선형으로 변하는 전이대 지층모델로 구성한다. 울프 반사계수 함수는 전이대 상하지층의 속도비, 주파수, 전이대 두께 함수로 구성되어 있어 저류층 두께나 해저면 전이대 두께를 추정하는데 활용할 수 있다. 이 연구에서는 심층학습을 이용하여 전이대 두께를 예측 방법을 제안한다. 심층학습을 적용하기 위해 사암 저류층, 셰일 덮개암으로 구성한 인공 전이대 지층모델에 두께에 따른 울프 반사계수 모델링을 수행하고 시간-스펙트럼 영상자료를 확보하였다. 두께별 시간-주파수 스펙트럼 영상과 중합단면도 트레이스에서 구한 시간-주파수 스펙트럼 비교로부터 구한 두께 추정결과는 항상 정확하게 전이대의 두께를 제시하지는 못하였다. 그러나 다양한 환경에서 학습자료를 확보하고 정확도를 높이면 현장자료적용이 가능할 것으로 본다.

• 한국항행학회논문지
• /
• 제28권1호
• /
• pp.136-141
• /
• 2024

본 논문에서는 10.525 GHz 대역에서 동작하는 광대역 인셋-급전 마이크로스트립 패치 안테나를 제안하였다. 제안된 광대역 인셋-급전 마이크로스트립 패치 안테나는 3개의 폭이 좁은 직사각형 패치로 구성된다. 중앙 패치의 중심에서 2개의 대칭적인 측면 패치들이 스트립 도체로 연결되어 중간 패치에 대해 수직 방향으로 엇갈리게 중심이 이동하여 배치되었다. 성능 비교를 위해 기존의 인셋-급전 정사각형 마이크로스트립 패치 안테나를 설계하였다. 실험 결과, 제작된 광대역 인셋-급전 마이크로스트립 패치 안테나의 측정 입력 반사 계수의 전압 정재파비가 2 이하인 주파수 대역은 10.036-11.051 GHz (9.63%)이고, 제작된 기존의 인셋-급전 정사각형 마이크로스트립 패치 안테나의 측정 입력 반사 계수의 주파수 대역은 10.306-10.772 GHz (4.42%)이다. 따라서, 제작된 광대역 인셋-급전 마이크로스트립 패치 안테나의 입력 반사 계수 주파수 대역폭은 기존의 인셋-급전 정사각형 마이크로스트립 패치 안테나에 비해 2.18배 증가하였다.

• Journal of the Optical Society of Korea
• /
• 제7권4호
• /
• pp.224-229
• /
• 2003

We report a novel optical delay line that can be implemented using only optical fiber and fiber devices without the need for any bulk-optic devices such as lens, prism, and moving mirror. The dispersive property of a chirped fiber Bragg grating (CFBG) is exploited to get the delay. The proposed delay line constitutes two identical CFBGs cascaded in the reverse order with one of them being strained. Analysis reveals that the small displacement or the strain applied on the CFBG is effectively amplified in the delay line by the ratio of the minimum resonant wavelength and the reflection bandwidth of the CFBG. The dispersion properties of the CFBG with and without the strain are analyzed in detail. The theoretical performance of the proposed delay line is also discussed. Applications of the proposed delay line are expected in the field of high-speed optical coherence tomograpy.

• 비파괴검사학회지
• /
• 제12권1호
• /
• pp.9-15
• /
• 1992

Ultrasonic spectroscopy is likely to become a very powerful NDE method for detection of microfects and thickness measurement of thin film below the limit of ultrasonic distance resolution in the opaque materials, provides a useful information that cannot be obtained by a conventional ultrasonic measuring system. In this paper, we considered a thin film below the limit of ultrasonic distance resolution sandwitched between two substances as acoustical analysis model, demonstrated the usefulness of ultrasonic spectroscopic analysis technique using information of ultrasonic frequency for measurements of thin film thickness, regardless of interference phenomenon and phase reversion of ultrasonic waveform. By using frequency intervals(${\triangle}f$) of periodic minima from the ratio of reference power spectrum of reflective waveform obtained a sample to power spectrum of multiple reflective waves obtained interference phenomenon caused by ultrasonic waves reflected at the upper and lower surfaces of a thin layer, can measured even dimensions of interest are smaller than the ultrasonic wave length with simplicity and accuracy.

• 비파괴검사학회지
• /
• 제13권1호
• /
• pp.21-28
• /
• 1993

If the infinitesimal delamination exists and the two waves can hardly be distinguished from each other on account of being much closer, we cannot measure the thickness of delamination by the time difference method. On this study, we calculated the thickness of infinitesimal delamination model by means of measuring echo height due to the deflection of material particles and utilized Newton Ring for optical measurement as a delamination model. From the result of Newton Ring expressed in the delamination model, we can calculate the infinitesimal delamination thickness up to $0.2{\sim}0.3{\mu}m$ due to the difference of acoustic impedance by the ratio of the echo height to the total reflection.

• 센서학회지
• /
• 제21권6호
• /
• pp.408-412
• /
• 2012

An in-line dispersive delay line (DDL) demands low and controllable reflectivity of the reflectors, especially if the surface acoustic wave (SAW) propagates all the way along the reflecting structure. The metal reflectors are usually too strong and introduce too much attenuation in such a device. The proposed solution of this problem is to spatially separate the acoustic channels for different frequencies with the help of Fan-shaped Transducers (FIDT) and to use narrow open metal reflectors to reduce reflectivity. Special arrangement of FIDT is performed to use 180-deg. reflection of the SAW. Narrow open metal strips with a metallisation ratio of the order of 20% are used as reflectors with small and controllable reflectivity. Reflectivity of such strips is estimated both theoretically and experimentally. Experimental performance of the proposed DDL is presented.

• 품질경영학회지
• /
• 제42권2호
• /
• pp.179-187
• /
• 2014

Purpose: Since several problems were found when present non-conducting metal coating process was applied to mass production, we study and develop to improve those problems. Methods: In this paper, a couple of analysis methods such as surface hardness, XPS spectrum analysis, morphology, and reflection ratio were used. Results: This paper suggest a new possibility of Non-conducting thin metal coating method that has quality of mass production phase without UV coating process. Conclusion: By the result of analysis, we can set optimized process conditions of the electro deposition coating using electron beam.