Browse > Article
http://dx.doi.org/10.7469/JKSQM.2014.42.2.179

On Feasibility Study of the Charged Particle Beam Pretreatment Process for Non-conducting Metal Coating  

Na, Myung Hwan (Department of Statistics, Chonnam National University)
Park, Young Sik (Korea Photonics Technology Institute)
Shim, Ha-Mong (Korea Photonics Technology Institute)
Chun, Young Ho (Department of Industrial Engineering, Hong Ik University)
Publication Information
Abstract
Purpose: Since several problems were found when present non-conducting metal coating process was applied to mass production, we study and develop to improve those problems. Methods: In this paper, a couple of analysis methods such as surface hardness, XPS spectrum analysis, morphology, and reflection ratio were used. Results: This paper suggest a new possibility of Non-conducting thin metal coating method that has quality of mass production phase without UV coating process. Conclusion: By the result of analysis, we can set optimized process conditions of the electro deposition coating using electron beam.
Keywords
Electro Deposition Coating; Sheet Resistance; Non-Conducting; Metal Coating;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Matthée, T. et al. 1999. "Metallization of polymers by plasma pretreatment followed by an electroplating process." The 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects, Newark, New Jersey, December 2-3.
2 Skelly, J. "Metallization of Plastics." Techinical Review.
3 Shimshock , P. 2006. "Optical Coatings on Plasics." The 3rd Mikkeli International Industrial Coating Seminar, Mikkeli, Finland, March 17-19.
4 Skelly, J. 2008. "Decorative Plating Processes for Common Plastic Resins." Metalfinishing.
5 Subramanyam, T. et al. 2006. "Non-conductive Radio Frequency Transparent Metallic Looking Coatings." The 3rd Mikkeli International Industrial Coating Seminar, Mikkeli, Finland, March 17-19.
6 Azuma, H. 2005. "Coating on Plastics Treated by Laser Ablation without Primer." R&D Review of Toyota CRDL 40(2):50.
7 Azuma, H. et al. 2008. "New Surface Treatment of Polymers by Simultaneous Exposure to Vacuum Ultra-Violet Light and Nanometric-Sized Particles." Jpn. J. Appl. Phys. 43(10):1250.
8 Charbonnier, M. et al. 1999. "New approaches for electroless plating processes by activation of polymer surface using low pressure plasma and dielectric-barrier discharge devices." The 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects, Newark, New Jersey, December 2-3.
9 Fracassi, F. 2006. "Surface modification of polymers and metals with low temperature plasma." The 3rd Mikkeli International Industrial Coating Seminar, Mikkeli, Finland, March 17-19.
10 Kang, H. et al. 2004. "The Z-CUSUM Control Chart for the Process with Recurring Cycles or Frequent Small Shifts." Journal of the Korea Society for Quality Management 32(2):132-153.
11 Kim, J., and Kim, S. 2012. "Local $T^{2}$ Control Charts for Process Control in Local Structure and Abnormal Distribution Data." Journal of the Korea Society for Quality Management 40(3):337-346.   DOI   ScienceOn