• 제목/요약/키워드: Reflection Ratio

검색결과 415건 처리시간 0.032초

ITS에 있어서 Hi-Pass 시스템의 성능 개선을 위한 전파흡수체의 개발 (Development of the EM wave Absorber for Improving the Performance of Hi-Pass System in ITS)

  • 김동일;김정창;주양익
    • 한국정보통신학회논문지
    • /
    • 제18권7호
    • /
    • pp.1505-1510
    • /
    • 2014
  • 하이패스 시스템은 5.8 GHz대 무선통신방식을 채용하는 기본 요소 중의 하나이며, 지능교통정보시스템(ITS; Intelligent Traffic System)을 실현하는 한 부분이다. 그러나, 하이패스 시스템에서 신호에러, 다중반사, 또는 시스템간 간섭으로 인한 통신 오류는 자주 발생한다. 이와 같은 문제점을 해결하기 위하여 전자파흡수체가 적용될 수 있으며, 이를 위하여 카본, 센더스트 및 CPE의 조성비가 각각 다른 몇 가지 샘플을 제작하여 최적의 조성비를 탐색하였다. 그 결과 최적 조성비는 Carbon : Sendust : CPE is 10 : 40 : 50 wt.%임이 확인되었다. 복소 비유전율과 복소 비투자율은 측정 데이터를 이용하여 도출하였으며, 흡수체의 최적 설계 파라미터들은 시뮬레이션에 의하여 결정하였다. 나아가서, 전파흡수능을 흡수체의 두께를 변화시키면서 계산한 결과, 설계한 전파흡수체의 흡수능은 5.8 GHz에서 22.4 dB였다. 설계치에 기반을 두고 제작한 흡수체의 특성은 설계/시뮬레이션 값과 잘 일치하므로, 논문에 제안 개발된 하이패스용 전파흡수체는 실제 상황에 적용될 수 있을 것이다.

광도파 원리의 평면형 태양광 집광기 설계를 위한 광학해석 (Optical Analysis for Designing a Planar Solar Concentrator Based on Light Guide System)

  • 한종호;김종선;황철진;윤경환;강정진
    • 대한기계학회논문집A
    • /
    • 제36권1호
    • /
    • pp.9-16
    • /
    • 2012
  • 최근 태양광발전 시스템에서 태양광을 집광하는 광학기술이 접목된 집광기가 대두되고 있다. 본 연구에서는 광도파로 원리를 기반으로 한, 간단하면서 생산이 용이한 새로운 개념의 평면형 집광기를 제안하였다. 해당 집광기에서는 태양광 집광을 위하여 빛의 전반사와 굴절의 법칙에 의해 빛을 유도하는 마이크로 단위의 광학 패턴이 적용되었다. 본 집광기의 주요 설계변수로는 광도파 집광기의 기하집 광비 $R_c$와 마이크로 패턴의 두 각도 ${\Theta}_1$, ${\Theta}_2$를 선정하였다. 광학해석을 위한 시뮬레이션은 SPEOS로 수행되었으며 주요 설계변수의 변화에 따른 집광기의 광학효율을 예측하였다. 기하집광비 4, 5, 6에 대해서 광학효율 최대치가 각각 65.60%, 54.78%, 46.78%로 예측되었다. 집광기의 마이크로 패턴의 두 각도 ${\Theta}_1$, ${\Theta}_2$ 및 태양광 입사각에 따른 광학효율도 예측하였다.

학교 교실의 음환경 기준에 따른 실내마감 방안 (Interior surface treatment guidelines for classrooms according to the acoustical performance criteria)

  • 류다정;박찬재;한찬훈
    • 한국음향학회지
    • /
    • 제35권2호
    • /
    • pp.92-101
    • /
    • 2016
  • 교실 음환경은 학생들에게 매우 중요한 요소로 학습효과와 학업 성취에 매우 큰 영향을 미친다는 연구결과가 다수 발표되고 있다. 그러나 학교 교실의 신축이나 리모델링 시에 가이드라인 및 설계방안이 제시된 바 없어 적절한 음환경을 실현하는데 큰 어려움을 겪고 있다. 따라서 본 연구에서는 이론적 수식과 현장실험을 통하여 교실의 음환경 기준을 만족하기 위한 다양한 설계방안을 제시하고자 한다. 이를 위해 국내 중 고등학교의 교실에서 실내음향성능 기준을 만족하기 위해 필요한 최소 흡음면적을 계산하였다. 또한 교실의 천장 및 뒷벽의 다양한 마감상태에 따른 실내음향성능을 알아보고자 현장실험을 진행하여 실험 결과를 비교 분석하였다. 연구 결과, 국내 교실 천장에 현재 거의 모든 학교에서 시행하고 있는 것처럼 천정흡음재를 설치하지 않아도 잔향시간 기준인 0.8 s를 만족할 수 있는 것으로 나타났다. 특히, 천장 일부 면적에 반사재를 적용하되 면적의 비율이 흡음 2 : 반사 1이면서 가로로 구획하는 것이 음압레벨을 향상시키며 전체가 흡음인 경우와 비슷한 명료도[$C_{50}$, $D_{50}$, RASTI(Rapid Speech Transmission Index)]를 확보할 수 있다.

$TiO_2$ Thin Film Patterning on Modified Silicon Surfaces by MOCVD and Microcontact Printing Method

  • 강병창;이종현;정덕영;이순보;부진효
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2000년도 제18회 학술발표회 논문개요집
    • /
    • pp.77-77
    • /
    • 2000
  • Titanium oxide (TiO2) thin films have valuable properties such as a high refractive index, excellent transmittance in the visible and near-IR frequency, and high chemical stability. Therefore it is extensively used in anti-reflection coating, sensor, and photocatalysis as electrical and optical applications. Specially, TiO2 have a high dielectric constant of 180 along the c axis and 90 along the a axis, so it is highlighted in fabricating dielectric capacitors in micro electronic devices. A variety of methods have been used to produce patterned self-assembled monolayers (SAMs), including microcontact printing ($\mu$CP), UV-photolithotgraphy, e-beam lithography, scanned-probe based micro-machining, and atom-lithography. Above all, thin film fabrication on $\mu$CP modified surface is a potentially low-cost, high-throughput method, because it does not require expensive photolithographic equipment, and it produce micrometer scale patterns in thin film materials. The patterned SAMs were used as thin resists, to transfer patterns onto thin films either by chemical etching or by selective deposition. In this study, we deposited TiO2 thin films on Si (1000 substrateds using titanium (IV) isopropoxide ([Ti(O(C3H7)4)] ; TIP as a single molecular precursor at deposition temperature in the range of 300-$700^{\circ}C$ without any carrier and bubbler gas. Crack-free, highly oriented TiO2 polycrystalline thin films with anatase phase and stoichimetric ratio of Ti and O were successfully deposited on Si(100) at temperature as low as 50$0^{\circ}C$. XRD and TED data showed that below 50$0^{\circ}C$, the TiO2 thin films were dominantly grown on Si(100) surfaces in the [211] direction, whereas with increasing the deposition temperature to $700^{\circ}C$, the main films growth direction was changed to be [200]. Two distinct growth behaviors were observed from the Arhenius plots. In addition to deposition of THe TiO2 thin films on Si(100) substrates, patterning of TiO2 thin films was also performed at grown temperature in the range of 300-50$0^{\circ}C$ by MOCVD onto the Si(100) substrates of which surface was modified by organic thin film template. The organic thin film of SAm is obtained by the $\mu$CP method. Alpha-step profile and optical microscope images showed that the boundaries between SAMs areas and selectively deposited TiO2 thin film areas are very definite and sharp. Capacitance - Voltage measurements made on TiO2 films gave a dielectric constant of 29, suggesting a possibility of electronic material applications.

  • PDF

A topological metal at the surface of an ultrathin BiSb alloy film

  • Hirahara, T.;Sakamoto, Y.;Saisyu, Y.;Miyazaki, H.;Kimura, S.;Okuda, T.;Matsuda, I.;Murakami, S.;Hasegawa, S.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.14-15
    • /
    • 2010
  • Recently there has been growing interest in topological insulators or the quantum spin Hall (QSH) phase, which are insulating materials with bulk band gaps but have metallic edge states that are formed topologically and robust against any non-magnetic impurity [1]. In a three-dimensional material, the two-dimensional surface states correspond to the edge states (topological metal) and their intriguing nature in terms of electronic and spin structures have been experimentally observed in bulk Bi1-xSbx single crystals [2,3,4]. However, if we want to know the transport properties of these topological metals, high purity samples as well as very low temperature will be needed because of the contribution from bulk states or impurity effects. In a recent report, it was also shown that an intriguing coupling between the surface and bulk states will occur [5]. A simple solution to this bothersome problem is to prepare a topological metal on an ultrathin film, in which the surface-to-bulk ratio is drastically increased. Therefore in the present study, we have investigated if there is a method to make an ultrathin Bi1-xSbx film on a semiconductor substrate. From reflection high-energy electron diffraction observation, it was found that single crystal Bi1-xSbx films (0${\sim}30\;{\AA}A$ can be prepared on Si(111)-$7{\times}7$. The transport properties of such films were characterized by in situ monolithic micro four-point probes [6]. The temperature dependence of the resistivity for the x=0.1 samples was insulating when the film thickness was $240\;{\AA}A$. However, it became metallic as the thickness was reduced down to $30\;{\AA}A$, indicating surface-state dominant electrical conduction. Figure 1 shows the Fermi surface of $40\;{\AA}A$ thick Bi0.92Sb0.08 (a) and Bi0.84Sb0.16 (b) films mapped by angle-resolved photoemission spectroscopy. The basic features of the electronic structure of these surface states were shown to be the same as those found on bulk surfaces, meaning that topological metals can be prepared at the surface of an ultrathin film. The details will be given in the presentation.

  • PDF

AM 라디오 고효율전송의 전력 절감 효과 분석 (A Study on Power Saving Effect Through Introduction of AM Radio High Efficient Transmission System)

  • 이상운
    • 방송공학회논문지
    • /
    • 제24권4호
    • /
    • pp.670-675
    • /
    • 2019
  • AM 라디오 방송은 FM라디오 대비해 음질은 떨어지나 서비스 권역이 넓으며, 야간에는 전리층 반사를 이용하여 해외까지도 송신이 가능한 장점이 있다. 그러나 AM라디오방송은 통상 수십 ~ 수백 kW 급의 대출력 송신을 위해 많은 전력이 요구되어 방송사의 재정적 부담으로 작용된다. 이런 이유에서 최근 국내 방송사들은 AM 라디오방송 송출 전력을 낮출 수 있는 고효율 송출방식의 도입을 요구하고 있다. 따라서 이들 방식이 기존 AM라디오 방송 송출 대비 어느 정도의 전력 절감이 가능하며, 기존의 허가 서비스 권역과 음질을 유지될 수 있는 지와 해당 기술을 도입하기 위해서 어떤 정책들이 필요한 지 등이 정책적 이슈로 대두되었다. 본고에서는 기존 AM 라디오방송 송출시스템에 고효율 전송방식을 적용할 경우에 대해 송출 전력의 절감을 예측하였다. 연구 결과 기존 AM라디오 송출방식 대신 AMC방식의 고효율전송 방식을 채택할 경우, AM라디오 변조율이 70%인 경우 -3 dB의 컴팬딩을 적용하면 연간 AM라디오 방송 송출에 소요되는 전력요금이 51억8천5백만원에서 35억2천8백만원으로 감소되어 32.0%, -6 dB의 컴팬딩을 적용하면 26억 8백만원으로 감소되어 49.7%가 절감되는 것으로 분석되었다.

A Comparative Study on Reservoir Level Prediction Performance Using a Deep Neural Network with ASOS, AWS, and Thiessen Network Data

  • Hye-Seung Park;Hyun-Ho Yang;Ho-Jun Lee; Jongwook Yoon
    • 한국컴퓨터정보학회논문지
    • /
    • 제29권3호
    • /
    • pp.67-74
    • /
    • 2024
  • 본 논문에서는 기후 변화와 지속 가능한 수자원 관리의 중요성이 증가하는 가운데, 다양한 강우 측정 방법이 저수지 수위 예측 성능에 미치는 영향을 분석하기 위한 연구를 제시한다. 이를 위해 우리는 기상정보개방포털에서 제공하는 종관기상관측장비인 ASOS의 관측 강우, 자동기상관측장비인 AWS의 관측 강우, 그리고 면적강우비에 따라 재산정된 티센망 기반의 강우 데이터를 활용하여 신경망 기반 저수율 예측 모델에 대한 학습을 각각 수행하고, 학습된 모델의 예측 성능을 비교 및 분석하였다. 전라북도 소재 34개의 저수지에 대한 실험을 통해 각 강우량 측정방식이 저수율 예측 정확도 향상에 얼마나 기여하는지 조사하였다. 연구 결과, 티센망 기반의 강우 면적비를 활용한 저수지 강우 데이터가 가장 높은 예측 정확도를 제공한다는 것을 밝혀냈다. 이는 티센망이 주변 관측소들 사이의 정확한 거리를 고려함으로써 각 관측소가 대표하는 지역의 경계를 정의함으로써 각 지역의 실제 강우 상황을 더 정확하게 반영하기 때문이다. 이러한 발견은 정확한 지역 강우 데이터 학습이 저수율 예측에 있어 결정적인 요인 중 하나임을 시사한다. 더불어, 이 연구는 정밀한 강우 측정 및 데이터 분석의 중요성을 강조하며, 농업, 도시 계획, 홍수 관리와 같은 다양한 분야에서 예측 모델의 잠재적 응용 가능성을 제시한다.

교사환경기준에 관한 연구 (A Study on Environmental Standards of School Building)

  • 홍석표;박영수
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제1권1호
    • /
    • pp.11-43
    • /
    • 2000
  • The purpose of this study was, through analyzing the previous researches, to grasp the present status of environment of school building(ESB), research the sundry records of each element and, through comparative analysis of the standard of ESB in Korea, the United States, and Japan, select the normative standard of ESB, to clarify the point at issue presented in Regulation of Construction & facility Management for Elementary and and Secondary School in Korea, and to suggest an alternative preliminary standard of ESB. To carry out a research for this purpose, these were required: 1. to investigate the existing present status of ESB, 2. to make a comparative analysis of the standard of ESB in each country, 3. to suggest the normative standard of preliminary standard of ESB, 4. to analyze the controversial points of the standard of ESB in Korea, 5. to suggest an alternative preliminary standard of ESB. The conclusions were as follows: 1. Putting, through analyzing the previous researches, the existing present status of ESB together, it seemed that lighting environment, indoor air environment and noise environment were all in poor conditions. 2. In the result of a comparative analysis of the standard of ESB in Korea, Japan and the United States, in Korea the factors of each lighting and indoor air environment were not presented properly, in Japan, in lighting environment aspect, the standard on natural lighting and the factors on brightness were not presented., and in the USA the essential factors of each environment were throughly presented. In the comparison of the standards on each factor, Korea showed that the standard level presented was less properly prescribed than those of the USA and Japan but it also showed that the standard levels prescribed in the USA and in Japan were mostly similar to the standard levels in records investigated. 3. With the result of the normative standard selection on School Builiding environment factor of prescribed in this study, the controversial points of the standard of ESB in Korea were analyzed and the result was utilized to suggest new preliminary standard of ESB. 4. As the result of the analysis of the controversial points of the standard of ESB in Korea, it was found that the standard of ESB in Korea should be established on a basis of School Health Act and be concretely presented in School Health Regulation and School Health Rule. The factors of each environment was improperly presented in the existing standard of ESB in Korea. Moreover the standard of them was inferior to that of the records investigated and those of in the USA and in Japan and it also showed that the standard of it in Korea was improper to maintain Comfortable Learning Environment. 5. A suggested preliminary standard of ESB acquired through above study as follows: 1) In this study a new kind of preliminary standard of ESB is divided into lighting environment, indoor air environment, noise environment, odor environment and for above classification, reasonable factor and standard should be established and the controling way on each standard and countermeasures against it should be considered. 2) In lighting environment, the factors of natural lighting are divided into daylight rate, brightness, glare. In the standard on each factor, daylight rate should secure 5% of a mean daylight rate and 2% of a minimum daylight rate, brightness ratio of maximum illumination to minimum illumination should be under 10:1, and in glare there should not be an occurrence factor from a reflector outside of the classroom. And the factors of unnatural lighting are illumination, brightness, and glare. In the standard on each factor, illumination should be 750 lux or more, brightness ratio should be under 3 to 1, and glare should not occur. And Optimal reflection rate(%) of Colors and Facilities of Classroom which influences lighting environment should be considered. 3) In indoor air environment factors, thermal factors are divided into (1) room temperature, (2) relative humidity, (3) room air movement, (4) radiation heat, and harmful gases (5) CO, (6) $CO_2$ that are proceeded from using the heating fuel such as oval briquettes, firewood, charcoal being used in most of the classroom, and finally (7) dust. In the standard on each factor, the next are necessary; room temperature: $16^{\circ}C{\sim}26^{\circ}C$(summer : $E.T18.9{\sim}23.8^{\circ}C$, winter: $E.T16.7{\sim}21.7^{\circ}C$), relative humidity: $30{\sim}80%$, room air movement: under 0.5m/sec, radiation heat: under $5^{\circ}C$ gap between dry-bulb temperature and wet-bulb temperature, below 1000 ppm of ca and below 10ppm of $CO_2$, dust: below 0.10 $mg/m^3$ of Volume of dust in indoor air, and ventilation standard($CO_2$) for purification of indoor air : once/6 min.(about 7 times/40 min.) in an airtight classroom. 4) In the standard on noise environment, noise level should be under 40 dB(A) and the noise measuring way and the countermeasures against it should be considered. 5) In the standard on odor environment, odor level under Physical Method should be under 2 degrees, and the inspecting way and the countermeasures against it should be considered.

  • PDF

보온단열재의 설치방법에 따른 보온성 효과 분석 (Analysis of the Insulation Effectiveness of the Thermal Insulator by the Installation Methods)

  • 김영복;이시영;정병룡
    • 생물환경조절학회지
    • /
    • 제18권4호
    • /
    • pp.332-340
    • /
    • 2009
  • 보온단열재의 열물리적 특성에 따라 보온성이 어떻게 달라지는가를 분석하여 그 개발방향과 올바른 사용방법을 알아보고자 실험장치를 제작하고 실험 분석하였다. 그 내용을 요약정리하면 다음과 같다. 실험은 실제의 사용 농업시설을 고려하여 목재로 모듈을 만들어 바깥 박스에는 비닐을 씌우고 안쪽 박스에는 보온재를 씌운 다음 모듈내부에서 가열되는 과정에서의 각 모듈의 보온성을 측정 분석하고, 보온재의 열물리적 특성을 측정하고 비교함으로서 보온재의 종류와 물리적 특성에 따른 보온효과를 분석하였다. 실험재료의 열물리적 특성은 KATRI(한국의류시험연구원)와 한국건자재시험연구원에서 측정가능한 항목 중 보온과 관련되는 항목을 중심으로 하여 두께, 공기투과도, 겉보기밀도, 차광율, 자외선차단율, 반사율(380~1200nm), 열전도율, 수분흡수율, 원적외선방사율 및 원적외선방사에너지를 측정하였다. 모듈내의 건구온도는 전열봉을 켜기 시작한 실험초기에 외기온도에서부터 상승하기 시작하여 약 30분이 지나면서부터는 비교적 정상상태에 도달하여 유지되고 있었으며 모듈별로 다른 온도차를 유지하고 있었다. 보온재별 모듈내외의 온도차는 모듈별로 최저 $8.4^{\circ}C$에서 최대 $17.5^{\circ}C$까지의 온도차이를 나타내고 있었다. 가장 보온성이 좋은 모듈는 모듈 8번으로서 다른 모듈들보다 현격하게 좋은 보온성을 나타내었으며, 모듈 8번은 양쪽 표면을 미니마트로 하고 내부에 백색폴리에칠렌포옴 1mm 두께 세겹을 넣은 것이었다. 보온재의 표면 색깔이 앞뒤가 다를 때에는 흑색이 바깥방향을 향하도록 하고 백색이 안쪽을 향하도록 하면 그 반대의 경우보다 보온성이 상당히 커지는 것을 알 수 있었고, 양쪽면이 흑색인 경우가 양쪽면이 백색인 경우보다 더 보온성이 좋은 것으로 나타났다. 실험모듈 전체에서 흑색의 경우 백색에 비해 반사율이 훨씬 적은 값을 나타내었다. 알루미늄반자재의 경우 반짝이는 유광면이 바깥쪽을 향하도록 설치하는 것이 보온성이 좋은 것으로 나타났다. 같은 재료라 하더라도 내부의 재료가 어느 방향을 보도록 하는가에 따라서도 보온성이 달라지는 것으로 나타났다. 바깥쪽에 부직포를 두고 안쪽에 화학솜과 얇은 흑색부 직포(40g) 한겹을 넣어 만든 재료의 경우 안쪽의 얇은 부직포가 바깥쪽에 놓이도록 설치하는 것이 안쪽에 놓이도록 설치하는 것보다 보온성이 좋은 것으로 나타났다. 그리고, 양쪽에 미니마트를 두고 안쪽에 화학솜과 백색 피폰(폴리에틸렌포옴 두께 1mm) 한겹을 넣어 만든 재료의 경우 백색 피폰이 바깥쪽에 놓이도록 설치 하는 것이 그 반대의 경우보다 매우 큰 차이로 보온성이 나아지는 것을 알 수 있었다. 보온재를 구성하는 겹수의 효과를 알아보기 위한 실험에서 재료는 같은 재료를 사용하면서 안쪽에 피폰(폴리에틸렌포옴 1mm)을 두겹 넣은 경우와 세 겹 넣은 경우에서 한겹을 더 넣은 모듈이 매우 보온성이 좋은 것을 알 수 있었다.

치(置)와 화(和)의 개념으로 분석한 남계서원의 경관짜임 (Landscape Composition Based on Placement and Harmony in the Namgea Suhwon)

  • 노재현;신상섭
    • 한국조경학회지
    • /
    • 제37권4호
    • /
    • pp.72-85
    • /
    • 2009
  • 본 연구는 인간 활동을 담는 형식과 의미의 총체라 할 수 있는 서원, 그 중에서도 경상남도 함양의 남계서원을 대상으로 공간 및 시각구성상에 내재된 형식미와 의미 파악을 통해 서원 조영에 담겨진 경관짜임 원리를 풀이하고 현대 유사 전통적 공간의 경관설계 시 적용하기 위한 착안점을 구하기 위해 시도되었다. 남계서원은 생성과 풍요를 거쳐 초월과 회귀로 이어지는 비산비야(非山非野)의 풍수적 명처[연화부수형]에 생거사유(生居死幽) 형국에서부터 치(置)와 화(和)를 이루고 있다. 그리고 사당-내삼문-강당-동서재-외삼문으로 이어지는 위계는 일상제-삼신-오제로 연결되는 삼신오제사상의 투영이자 주자가례에 의한 예제적 틀을 준용한 비례부동(非禮不動)의 의미 넣기 기법이다. 또한 남계서원의 환경설계에는 산수의 물질적 대립 항 그리고 전후(前後), 종횡(縱橫), 동정(動靜)이라는 방향과 운동의 이진부호적 복합체계를 개입시켜, 경직된 축선을 고집하지 않으면서도 자연지형에 밀착된 건물과 마당의 공간 및 시각구성상의 비대칭 균형원칙을 추구하여 '치와 화'의 교집합 공간을 구축하였다. 한편, 건물 이름 짓기는 학문수양과 관련하여 성리학적 가르침과 풍수사신사(風水四神砂) 구조와 연계시켜 이루어짐으로서 기능과 의미를 일체화시킨 치와 화의 경관 놓기와 경관 맞추기가 드러나고 있다. 또한, 건물과 마당의 폐쇄감으로 볼 때 강학(講學) 및 유상(遊賞)공간 그리고 제향공간은 그 공간성격에 따라 개방감과 위요감, 긴장감과 안도감, 상승감과 위계감이 적절히 부여되는 등 청각적으로 의사 전달이 가능한 인간적 척도 개념이 반영되고 있다. 남계서원의 초기 건립과 이후의 변모과정에서 드러난 자연과 유연하게 이어지는 기능, 완결을 지향하는 비완결의 열림 그리고 긴장과 이완이 반복되는 동세적 아름다움을 구현하기 위한 치(置-놓기)와 자연과 일체감을 갖는 질서와 연속, 기념성과 일상성의 공유 등을 구현하기 위한 화(和-맞추기)의 경관짜임 의도는 오늘날 토지이용계획은 물론 캠퍼스 환경설계 분야에 시사하는 바가 크다.