• 한국표면공학회지
• /
• 제38권2호
• /
• pp.55-59
• /
• 2005

ITO/Ni/ITO thin films were deposited on the PET by RF magnetron sputtering. Dependance of the process parameters such as deposition pressure, positions of Ni layer, on the transmittance, reflectance and sheet resistance of ITO/Ni/ITO film were investigated. When the Ni layer is placed at the center of ITO and deposition pressure is low, ITO/Ni/ITO films showed better optical and electrical properties. At these conditions, the transmittance, reflectance and sheet resistance of the ITO film were $90\%,\;0.38\%$ and $185\Omega/\Box$ respectively.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.234-237
• /
• 2001

In this study, efforts were made to understand the propagation of electromagnetic wave through the foam core sandwich structure by the analytical model. Foam core sandwich structure is composed of glass/epoxy composite skins and foam core. Transmittance and reflectance of the arbitrary linearly polarized incident TEM waves through the unidirectional composites, foam and foam core sandwich structures were determined as functions of thickness, fiber orientation of composites, incident angle and polarization angle by the analytical model. From the results of the analysis, the general tendency of transmittance and reflectance of electromagnetic wave through composites, foam and foam core sandwich structures was obtained.

• 한국태양에너지학회 논문집
• /
• 제28권5호
• /
• pp.8-13
• /
• 2008

In this study, we analyze the electrical optical characteristics of transparent glass for photovoltaic and glass-glass module application. The elemental facts from raw glass to laminated glass with solar cells are analyzed using UV spectrophotometer and spectroradiometer. From the data of transmittance and reflectance, the optimum PV module processing condition and selection of material for fabrication should be considered deeply for obtaining high module efficiency. Also we introduce two glasses which has 2%$\sim$4% higher transmittance using coating technology with anti-reflection material. From this experiment, we try to give some basic information for PV module manufacturing industry. The detail description is specified as the following paper.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.176-177
• /
• 2013

Surface plasmon polaritons (SPPs) have attracted the attention of scientists and engineers involved in a wide area of research, microscopy, diagnostics and sensing. SPPs are waves that propagate along the surface of a conductor, usually metals. These are essentially light waves that are trapped on the surface because of their interaction with the free electrons of conductor. In this interaction, the free electrons respond collectively by oscillating in resonance with the light wave. The resonant interaction between the surface charge oscillation and the electromagnetic field of the light constitutes the SPPs and gives rise to its unique properties. In this papers, we studied theoretical and experimental extraordinary transmittance (T) and reflectance (R) of 2 dimensional metal hole array (2D-MHA) on GaAs in consideration of the diffraction orders. The 2d-MHAs was fabricated using ultra-violet photolithography, electron-beam evaporation and standard lift-off process with pitches ranging from 1.8 to $3.2{\mu}m$ and diameter of half of pitch, and was deposited 5-nm thick layer of titanium (Ti) as an adhesion layer and 50-nm thick layer of gold (Au) on the semiinsulating GaAs substrate. We employed both the commercial software (CST Microwave Studio: Computer Simulation Technology GmbH, Darmstadt, Germany) based on a finite integration technique (FIT) and a rigorous coupled wave analysis (RCWA) to calculate transmittance and reflectance. The transmittance was measured at a normal incident, and the reflectance was measured at variable incident angle of range between $30^{\circ}{\sim}80^{\circ}$ with a Nicolet Fourier transmission infrared (FTIR) spectrometer with a KBr beam splitter and a MCT detector. For MHAs of pitch (P), the peaks ${\lambda}$ max in the normal incidence transmittance spectra can be indentified approximately from SP dispersion relation, that is frequency-dependent SP wave vector (ksp). Shown in Fig. 1 is the transmission of P=2.2 um sample at normal incidence. We attribute the observation to be a result of FTIR system may be able to collect the transmitted light with higher diffraction order than 0th order. This is confirmed by calculations: for the MHAs, diffraction efficiency in (0, 0) diffracted orders is lower than in the (${\pm}x$, ${\pm}y$) diffracted orders. To further investigate the result, we calculated the angular dependent transmission of P=2.2 um sample (Fig. 2). The incident angle varies from 30o to 70o with a 10o increment. We also found the splitting character on reflectance measurement. The splitting effect is considered a results of SPPs assisted diffraction process by oblique incidence.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.143-146
• /
• 1996

In (GeTe)$_{100-x}$(Sb$_2$Te$_3$)$_{x}$(x=33.5, 50, 66.5, 80 at.%) thin films, the optical properties of amorphous and crystalline thin film, XRD were studied. Also, the application for the phase change optical recording materials with the high stability and rapid erasing ability were studied. In the (GeTe)$_{100-x}$(Sb$_2$Te$_{3}$)$_{x}$ the transmittance was decreased with the increase of x. In all thin films, the transmittance was decreased and the reflectance was increased by annealing and particularly, the reflectance before and after annealing showed the large reflectance ratio. The XRD pattern, it was confined that these change of optical properties was due to the crystallization of amorphous thin films. The reflectance change was investigated using isothermal annealing condition.ion.ion.

• 한국안광학회지
• /
• 제6권1호
• /
• pp.101-105
• /
• 2001

UV 차단 렌즈 UV solution을 이용한 dip method로 제작하여 광 투과율과 광 반사율을 측정하였다. 광 투과율의 half point 파장 및 edge 파장이 dip 시간의 존성인 exponetial decay형식에 잘 적용되었다. $$W=W_0+A_1{e}{x}{p}[-(x-x_1)/t_1]$$ 광 투과율의 half point 파장은 358 nm 에서 408 nm로 이용하였고, edge 파장은 340 nm에서 398 nm로 이동하였다. 광 반사율 주 peak 380 nm는 dip 시간이 클수록 세기는 작아지고 장파장 쪽으로 이동하였으며, dip 시간 10분에서 UV solution의 성분 peak가 나타나기 시작하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.245-248
• /
• 2011

Many researches have been carried out to improve light absorption in the crystalline silicon solar cell fabrication. The rear reflection is applied to increase the path length of light, resulting in the light absorption enhancement and thus the efficiency improvement mainly due to increase in short circuit current. In this paper, we manufactured the silicon solar cell using the mono crystalline silicon wafers with $156{\times}156mm^2$, 0.5~3.0 ${\Omega}{\cdot}cm$ of resistivity and p-type. After saw damage removal, the dielectric film ($SiN_x$)on the back surface was deposited, followed by surface texturing in the KOH solution. It resulted in single-side texturing wafer. Then the dielectric film was removed in the HF solution. The silicon wafers were doped with phosphorus by $POCl_3$ with the sheet resistance 50 ${\Omega}/{\Box}$ and then the silicon nitride was deposited on the front surface by the PECVD with 80nm thickness. The electrodes were formed by screen-printing with Ag and Al paste for front and back surface, respectively. The reflectance and transmittance for the single-sided and double-sided textured wafers were compared. The double-sided textured wafer showed higher reflectance and lower transmittance at the long wavelength region, compared to single-sided. The completed crystalline silicon solar cells with different back surface texture showed the conversion efficiency of 17.4% for the single sided and 17.3% for the double sided. The efficiency improvement with single-sided textured solar cell resulted from reflectance increase on back surface and light absorption enhancement.

• 조명전기설비학회논문지
• /
• 제26권5호
• /
• pp.13-20
• /
• 2012

The light transmittance of optical device is one of the important conditions to improve the product performance and it has researched through the various methods. One of these methods to improve the optical transmittance is to use a pattern on optical surface. The advantages of this method are to simplify the manufacturing process and to easy mass production. If a surface of glass has with the proper patterns, we can expect a great effect on optical transmittance. The purpose of this research is to derive a pattern to get high transmittance from a theoretical approach and to analyze the transmittance through the simulation. And then, we made a sample with a pattern and compared with the results from simulation and experiment.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2005년도 하계학술발표회
• /
• pp.266-267
• /
• 2005

• 한국작물학회지
• /
• 제51권5호
• /
• pp.451-457
• /
• 2006

분쇄하지 않은 정조상태에서 현미와 백미의 성분을 측정 할 목적으로 수확 후 정조로부터 스펙트럼을 획득하였고(투과법 : 850-1050 nm, 반사법 : 400-2500 nm) 현미와 백미의 단백질, 아밀로스, 지방산, 수분함량, 식미값의 예측모델을 개발하여 그 정밀도를 비교 검토하기 위해서 일련의 시험을 실시한 결과는 다음과 같다. 투과법으로 정조의 스펙트럼을 수집한 후 현미의 단백질, 아밀로스, 지방산, 수분함량의 검량식을 작성한 결과 0.9001, 0.8321, 0.8077, 0.9553의 결정계수를 나타냈다. 백미의 단백질, 아밀로스, 수분함량, 식미값의 검량식을 작성한 결과 0.8255, 0.8559, 0.8226, 0.3421의 결정계수를 나타냈다. 반사법으로 정조의 스펙트럼을 수집한 후 현미의 단백질, 아밀로스, 지방산, 수분함량의 검량식을 작성한 결과 0.8286, 0.7705, 0.9094, 0.9694의 결정계수를 나타냈다. 백미의 단백질, 아밀로스, 수분함량, 식미값의 검량식을 작성한 결과 0.7904, 0.7679, 0.8435, 0.4881의 결정계수를 나타냈다. 이상의 결과에 의해서 단백질, 아밀로스, 지방산, 수분함량은 실용적인 결정계수를 얻었으나, 식미값은 결정계수가 너무 낮아 계속적인 연구가 필요하다고 판단하였다.