• 펄프종이기술
• /
• 제31권1호
• /
• pp.39-45
• /
• 1999

Refining in papermaking plays an important role in changing fiber properties as well as paper properties. The major effects of refining on pulp fibers are internal and external fibrillation, fiber shortening, and fines formation. Many workers showed that internal fibrillation of the primary refining effects was most influential in improving paper properties. In particular, refining produces separation of fiber walls into several lamellae, thus causing fiber wall swelling with water penetration. This leads to the increase of fiber flexibility and of fiber-to-fiber contact during drying. If the fibers are very flexible, they will be drawn into close contact with each other by the force of surface tension as the water is removed during the drainage process and drying stages. In order to study the effect of fiber wall delamination on paper properties, cross-sectional image of fibers in a natural condition had to be generated without distortion. Finally, it was well recognized that confocal laser scanning microscope (CLSM) could be one of the most efficient tool for creating and quantifying fiber wall delamination in combination with image analysis technique. In this study, the CLSM could be used not only to observe morphological features of transverse views of swollen fibers refined under low and high intensity, but also to investigate the sequence of fiber wall delamination and fiber wall breakage. From the CLSM images, increasing the specific energy or refining decreased the degree of fiber collapse, fiber cross-sectional area, fiber wall thickness and lumen area. High intensity refining produced more external fibrillation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1463-1474
• /
• 2008

In order to investigate stabilization effect and sustainability on As-contaminated farmland soils which were affected the abandoned mine site and stabilized by zerovalent iron(ZVI) and industrial by-products, batch-scale and pilot-scale tests were carried out. In batch tests, ZVI and industrial by-products(blast furnace slag, steel refining slag and oyster shell powder) were used in treatment materials to reduce the As leaching. Industrial by-products were mixed with As-contaminated soils, in the ratio of 1%, 3%, 5% and 7% on the weight base of dried soil. The results of batch-scale tests was shown that the reduction of As concentration was observed in all samples and it was expected that ZVI and steel refining slag were more effective than other treatment materials to stabilize As compounds. In pilot-scale tests, columns were filled with untreated soils and treated soils mixed with ZVI and steel refining slag in the same mixing ratio of 3%. Distilled water was discharged into the columns with the velocity of 0.3 pore volume/day. During the test, pH, EC, Eh and As concentration were measured in the regular term(1pore volume). after six months, pilot-scale tests were retested to investigate sustainability of treatment materials. As a result, It was shown that the leachate from control column was continuously released during the test period and its concentration was greater than $100ug{\cdot}L^{-1}$ which was exceeded the national regulation of water discharged to river or stream ($50ug{\cdot}L^{-1}$). On the other hand, soil treated with ZVI and steel refining slag showed that the concentrations of leachate were lower than national regulation of water discharged to river or stream. Therefore it was expected that ZVI and steel refining slag could be applied to the farmland site as the alternative treatment materials.

• 농업생명과학연구
• /
• 제43권5호
• /
• pp.57-62
• /
• 2009

본 연구는 고로쇠나무, 붉은고로쇠나무, 우산고로쇠나무 수액을 대상으로 수액정제시스템을 활용하여 정제수액의 활용가능성을 분석하기 위하여 수행되었다. 세 수종의 고로쇠나무 수액 원액에는 Bacillus속 세균 1종과 효모 3-4종, 곰팡이 2종이 검출되었다. 수액의 pH는 수액원액이 6.5, 정제수액이 6.3-6.4, 당도는 원액이 1.67-3.05, 정제수액이 1.64-3.02로 약간 줄어들었다. 당 성분은 모든 수액에서 sucrose만 검출되었다. 수액 속의 미네랄 성분도 원액에 비해 정제수액에 비해 조금 줄어들었다. 이들 결과는 고로쇠나무류 수액을 정제하면 장기간의 보관과 함께 음용도 가능하다는 것을 시사한다.

• 농업과학연구
• /
• 제26권1호
• /
• pp.21-30
• /
• 1999

본 연구는 골판지고지의 가장 중요한 물성인 강도적 성질을 증대시키기 위하여 섬유의 전처리 방법으로서 Hobart mixer를 사용하여 섬유 내부의 결합제거 및 섬유표면에 Microcompression을 형성하여 개질처리 하였으며, 4가지 방법의 고해방법(Valley beater, Kady mill, Impact refining)을 채택하여 골판지고지의 최적고해 방법을 찾는데 그 목적을 두고 이 연구를 수행하였다. 그 결과는 다음과 같다. 1. 섬유장감소를 적게 유발하는 고해방법으로는 Kady mill과 PFI mill의 고해방법 이었으며 고해시 Curl을 펴주는 고해방법을 Kady mell과 Valley beater의 고해방법이 적절하였다. 2. 열단장은 Valley beating의 고해방법에 의하여 강도가 가장 많이 증가되었으며 인열강도는 가장 많이 감소하였다. 섬유전처리를 한 Comp-1과 Comp-2는 고해방식과 상관없이 열단장을 전체적으로 약 10% 증대시켰다. 3. 인열강도는 Comp-1, Comp-2의 전처리방법과 PFI mill 고해로 증대할수 있었다. 4. 파열강도는 Comp-1, Comp-2의 전처리방법과 Valley beater 고해로 증대할수 있었다. 5. 인열강도를 우지한채로 열단장을 가장 높이는 방법은 섬유전처리 방식인 Comp-1이나 Comp-2를 사용하여 Valley beating을 이용하는 방법으로 판단되었다.

• 자원리싸이클링
• /
• 제26권6호
• /
• pp.84-90
• /
• 2017

저품위 동 함유 슬러지로부터 회수된 동 조금속을 황산구리 전해액에서 전해정련을 수행하여 고순도 동을 회수하고자 하였다. 유기첨가제 종류 및 농도에 따른 전해정련동 표면 형상 및 조도를 분석하였을 때, gelatin계 유기첨가제 5 ppm 및 thiol계 유기첨가제 5~10 ppm 혼합 조건에서 가장 우수한 표면 형상을 얻을 수 있었다. 건식환원공정을 통해 회수한 철(Fe), 니켈(Ni), 코발트(Co) 및 주석(Sn) 등의 불순물이 함유된 각 86.635, 94.969 및 99.917 wt.% 순도의 동 조금속을 사용하여 전해정련하였고, 순도 3N~4N급 전해정련동을 얻을 수 있었다. 동 조금속, 전해액, 전해정련동의 불순 원소 농도 및 동 순도 등의 분석을 통해, 순도 99.99 wt.% 이상 전해정련동을 회수할 수 있는 전해정련 공정시간 및 동 조금속 순도를 도출하였다.

• 펄프종이기술
• /
• 제45권5호
• /
• pp.56-63
• /
• 2013

In this study, paper mill applicability of two kinds of cotton pulps which have different initial freeness, fiber length and intrinsic fiber strength were investigated. Basic properties such as CED viscosity, fiber length, and crystallinity of major two kinds of cotton pulps were analyzed, and beatability of cotton pulps and physical properties of handsheet made from two kinds of cotton pulps were compared. Laboratory beating was performed at different refining conditions such as refining loads and freenesses. Relationship between beating degree and physical properties of handsheet were compared to seek optimum condition of refining for different cotton pulps application to paper mill.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.56-62
• /
• 2002

Alternative way of shaping fibers suitable for papermaking was introduced. Impact refining, which was done simply by hitting wet fibers with a metal weight vertically, was intended to keep the fibers from shortening and to cause mostly internal fibrillation. Virgin chemical pulp, its recycled one and OCC were used in the experiment. It was noticed from the experiment that impact refining on virgin chemical pulp kept the fiber length and increased bonding properties greatly. However, in the recycled fibers from the chemical pulp, fiber length and bonding properties were decreased. In OCC, which seems to contain fractions of semi-chemical pulp and mechanical pulp (GP), and which is recycled pulp from corrugated boxes, fiber length and bonding properties were decreased disastrously. We believe recycled cellulosic fibers (recycled chemical pulp and OCC in this case), which went through hornification, were less resistant to the mechanical impact than virgin chemical pulp. For virgin chemical pulp, impact refining allowed no significant fiber length shortening, high WRV, and high mechanical strength.

• 한국표면공학회지
• /
• 제27권5호
• /
• pp.292-302
• /
• 1994

Alloy deposits of 80Sn-20Pb, electroplated on Cu-based leadframe alloy from an organic sulfonate bath were aged at $150^{\circ}C$ to form intermetallic phases between substrate and deposit, and effects of the deposit morphology, influenced by deposition conditions, on the fracture resistance of the 80Sn-20Pb deposit aged at $150^{\circ}C$ were examined. The growth rate of intermetallic compound layer on aging depended on the microstructure of deposit ; it was fastest in deposit formed using pulse current in bath without grain refining additive, but slowest in deposit formed using dc current in bath containing grain refining additive in spite of similar structure with equivalent grain size. The grain refining additive incorporated in electrodeposit appears to inhibit diffusion of atoms on aging, resulting in slow growth of intermetallic layer in the thickness direction but substantial growth in the lateral one. Density of surface cracks that were occurring when samples were subjected to the $90^{\circ}$-bending test increased with increasing the thickness of intermatallic layer on aging. For the same aged samples, the surface crack density of the sample electrodeposited from a bath containing the grain refining additive was the least due to the inhibiting effect of the additive incorporated into the deposit during electrolysis on atomic diffusion.

• 자원리싸이클링
• /
• 제30권1호
• /
• pp.3-13
• /
• 2021

고급강은 소비자가 원하는 적절한 조성을 갖추고 있고 비금속 개재물의 제어를 통해 높은 청정도를 지닌 강을 의미하며, 철강 제품의 품질은 2차 정련 공정에서 제어하는 것이 지배적이다. 2차 정련에서는 시간이 흐름에 따라 용강, 슬래그, 비금속 개재물, 내화물 및 합금원소 간의 복잡한 반응이 동시에 일어나기 때문에 공정에 대한 제어가 쉽지 않다. 따라서 이전 연구자들은 2차 정련의 공정 예측을 위해 Kinetic 기반의 시뮬레이션 모델을 발표하였고, 정밀한 공정 예측을 위해 현재까지 발표된 시뮬레이션 모델들의 검토 및 분석이 필요하다. 본 연구에서는 Coupled Reaction 모델 기반의 2차 정련 모델들을 분석 및 검토하였고, 시뮬레이션 결과를 검토하였다.

• Smart Structures and Systems
• /
• 제29권1호
• /
• pp.207-220
• /
• 2022

Structural health monitoring (SHM) plays a vital role in the maintenance and operation of constructions. In recent years, autonomous inspection has received considerable attention because conventional monitoring methods are inefficient and expensive to some extent. To develop autonomous inspection, a potential approach of crack identification is needed to locate defects. Therefore, this study exploits two deep learning-based segmentation models, DeepLabv3+ and Mask R-CNN, for crack segmentation because these two segmentation models can outperform other similar models on public datasets. Additionally, impacts of label quality on model performance are explored to obtain an empirical guideline on the preparation of image datasets. The influence of image cropping and label refining are also investigated, and different strategies are applied to the dataset, resulting in six alternated datasets. By conducting experiments with these datasets, the highest mean Intersection-over-Union (mIoU), 75%, is achieved by Mask R-CNN. The rise in the percentage of annotations by image cropping improves model performance while the label refining has opposite effects on the two models. As the label refining results in fewer error annotations of cracks, this modification enhances the performance of DeepLabv3+. Instead, the performance of Mask R-CNN decreases because fragmented annotations may mistake an instance as multiple instances. To sum up, both DeepLabv3+ and Mask R-CNN are capable of crack identification, and an empirical guideline on the data preparation is presented to strengthen identification successfulness via image cropping and label refining.