• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.248-256
• /
• 2010

Acoustic side-aspect target strength (TS) of living Japanese anchovy (Engraulis japonicus) was measured at 120kHz during in situ experiments. The data were collected by lowering and horizontally projecting the splitbeam transducer into the anchovy school. For analysis and interpretation of the side-aspect TS data, acoustic theoretical model, based on the fish morphology, and dorsal-aspect TS data were used. Total length of the anchovy ranged from 6.6 to 12.8cm (mean length 9.3cm). The side-aspect TS distributed between -40 and -55dB, has an obvious length dependency. The mean side-aspect TS of the anchovy was -47.8dB, and the TS was about 2dB higher than mean TS generated from dorsal-aspect measurements. With reference to maximum TS, the results of the side-aspect TS were distributed within the range of the theoretical and dorsal-aspect TS. Apparently these tendency indicates that side-aspect TS measured from the study is useful data. These in situ measurements of side-aspect TS can be applied to improve acoustic detection and estimates of the anchovy, and is necessary to measure with a various frequency and length for making enhance data.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.E
• /
• pp.41-58
• /
• 1998

In this study, a wide range of volatile organic constituents of environmental tobacco smoke (ETS) were determined using an environmental chamber, where ETS is the sole source of target compounds. ETS was generated in an environmental chamber by a number of different cigarettes, including the Kentucky reference cigarette and eight different commercial brands. More than 30 compounds were measured simultaneously for a total of twelve experimental runs. The target compounds are classified into three major classes, i.e. vapor phase ETS markers including 3-ethnylpyridine (3-EP) and nicotine, carbonyl compounds including formaldehyde, and volatile organic compounds (VOCs). The results from the chamber study were used to generate characterized ratios of selected VOCs to 3-EP, a vapor phase ETS marker. Emission factors for VOCs associated with ETS were also estimated. The characteristic ratios appeared to be generally in good agreement with published data obtained by environmental chamber studies similar to this study. This implies that the ratios may be useful for identifying and quantifying the impact of ETS as a source of target compounds in 'real world' indoor environments, which is affected by a complex mixture of multi-sources. The environmental chamber method described here provides a direct and reliable method to compare the ETS generated by different cigarettes. The method can also be applied to the simultaneous determination of many different ETS components.

• The Journal of Korea Robotics Society
• /
• v.12 no.1
• /
• pp.33-41
• /
• 2017

We present a region-based approach for accurate pose estimation of small mechanical components. Our algorithm consists of two key phases: Multi-view object co-segmentation and pose estimation. In the first phase, we explain an automatic method to extract binary masks of a target object captured from multiple viewpoints. For initialization, we assume the target object is bounded by the convex volume of interest defined by a few user inputs. The co-segmented target object shares the same geometric representation in space, and has distinctive color models from those of the backgrounds. In the second phase, we retrieve a 3D model instance with correct upright orientation, and estimate a relative pose of the object observed from images. Our energy function, combining region and boundary terms for the proposed measures, maximizes the overlapping regions and boundaries between the multi-view co-segmentations and projected masks of the reference model. Based on high-quality co-segmentations consistent across all different viewpoints, our final results are accurate model indices and pose parameters of the extracted object. We demonstrate the effectiveness of the proposed method using various examples.

• Korean Journal of Remote Sensing
• /
• v.32 no.1
• /
• pp.49-60
• /
• 2016

This paper presents a set of methods to evaluate the image quality of smartphone cameras as compared with that of a DSLR camera. In recent years, smartphone cameras have been used broadly for many purposes. As the performance of smartphone cameras has been enhanced considerably, they can be considered to be used for precise mapping instead of metric cameras. To evaluate the possibility, we tested the quality of one DSLR camera and 3 smartphone cameras. In the first step, we compare the amount of lens distortions inherent in each camera using camera calibration sheet images. Then, we acquired target sheet images, extracted reference lines from them and evaluated the geometric quality of smartphone cameras based on the amount of errors occurring in fitting a straight line to observed points. In addition, we present a method to evaluate the radiometric quality of the images taken by each camera based on planar fitting errors. Also, we propose a method to quantify the geometric quality of the selected camera using edge displacements observed in target sheet images. The experimental results show that the geometric and radiometric qualities of smartphone cameras are comparable to those of a DSLR camera except lens distortion parameters.

• Journal of Korean Neurosurgical Society
• /
• v.53 no.2
• /
• pp.102-107
• /
• 2013

Objective : The Leksell Gamma Knife$^{(R)}$ (LGK) is based on a single-fraction high dose treatment strategy. Therefore, independent verification of the Leksell GammaPlan$^{(R)}$ (LGP) is important for ensuring patient safety and minimizing the risk of treatment errors. Although several verification techniques have been previously developed and reported, no method has ever been tested statistically on multiple LGK target treatments. The purpose of this study was to perform and to evaluate the accuracy of a verification method (modified variable ellipsoid modeling technique, MVEMT) for multiple target treatments. Methods : A total of 500 locations in 10 consecutive patients with multiple brain tumor targets were included in this study. We compared the data from an LGP planning system and MVEMT in terms of dose at random points, maximal dose points, and target volumes. All data was analyzed by t-test and the Bland-Altman plot, which are statistical methods used to compare two different measurement techniques. Results : No statistical difference in dose at the 500 random points was observed between LGP and MVEMT. Differences in maximal dose ranged from -2.4% to 6.1%. An average distance of 1.6 mm between the maximal dose points was observed when comparing the two methods. Conclusion : Statistical analyses demonstrated that MVEMT was in excellent agreement with LGP when planning for radiosurgery involving multiple target treatments. MVEMT is a useful, independent tool for planning multiple target treatment that provides statistically identical data to that produced by LGP. Findings from the present study indicate that MVEMT can be used as a reference dose verification system for multiple tumors.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.159-167
• /
• 2013

In stereo-view system, variations of target camera position or lighting conditions cause discrepancies on the luminance and chrominance components of stereo views. These discrepancies lead to inaccurate frame view prediction and low quality of 3 D video coding. In this paper, an efficient histogram interval calibration method is proposed for stereo-view coding, so as to compensate for the luminance component of target view. First the proposed method is analyzed by the histogram of the target image frame. Then, it divide two sections of histogram of that frame to correct the color discrepancies. Secondly, each section of the target frame is corrected the luminance component by identify the maximum matching region between the reference frame and the target frame. We have verified our proposed histogram matching method in comparison with the other color correction ones. Experimental results show that it can correct better luminance calibration results of PSNR(Peak Signal to Noise Ratio) and has less computation time.

• The Research Journal of the Costume Culture
• /
• v.15 no.1 s.66
• /
• pp.137-151
• /
• 2007

This study was performed to narrow down the Sizing System for Female Adult's garments(KS K 0051) following age target and body shapes. The study was based on the sizing system and the anthropometric measurements, called Size-Korea, which were surveyed in the years 2003 and 2004. At first, the subjects of the survey were classified into 4 age groups, $18{\sim}24,\;25{\sim}34,\;35{\sim}49\;and\;50{\sim}59$, based on the most significant differences of body sizes. Secondly, the ranges of four key dimensions - height, bust, waist and hip-of normal sizes were identified through analyzing Rohrer index and percentile. The selected sizes within the ranges were grouped by the drop which was the subtraction of bust girth from hip girth. In conclusion, there was the most frequent drop for each age group; 9cm drop for the $18{\sim}24$ years old group, the 6cm drop for the $25{\sim}34$ years old and $35{\sim}49$ years old and 3cm drop for $50{\sim}59$ years old. The upper body garment sizes of the same drop and target ages could be merged to 10 to 12 sizes, which were remarkably smaller than the Female Adult garment sizing system, and further to 2-5 sizes, considering the percentile importance. However, $50{\sim}59$ years old group needed to be analyzed in different ways, because the number of subjects of normal size in the age decreased rapidly, that the normal sizes for them were very limited. In addition, the reference body sizes of each garment size were apparently different when they were compared to each age groups. These basic data for garment size specification could be usefully adapted for the apparel companies' own sizing system according to their age target and body shapes, to achieve efficient production and better fit.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.1
• /
• pp.229-234
• /
• 1998

We study on a terrain contour matching algorithm using Radial Basis Functions(RBFs) for aided inertial navigation system for position fixing aircraft, cruise missiles or re-entry vehicles. The parameter optimization technique is used for updating the parameters describing the characteristics of an area with modified Gaussian least square differential correction algorithm and the step size limitation filter according to the amount of updates. We have applied the algorithm for matching a sampled area with a target area supposed that the area data are available from Radar Terrain Sensor(RTS) and Reference Altitude Sensor(RAS)

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.749-751
• /
• 1999

We acquired operating data in an existing steam turbine power plant using analog control system to investigate operation characteristics. We analyzed a load control logic to develop a digital turbine control system. The load control logic is constituted of load target, load reference, loading rate, load limit and admission mode transfer of valve. The result of this paper is utilized to implement a digital turbine control system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.439-440
• /
• 2012

New analysis methods complement classical approaches in the vehicle NVH development by reducing and accelerating iteration steps to obtain a target sound. Therefore, tools are required that allow an integrative approach of sound engineering and structural analysis and enable a precise simulation and modification based on measured data. The Response Modification Analysis (RMA) is such a hybrid solution, which provides indications of relevant transfer paths taking into account the sensitivity of response channels to modifications of reference channels.