• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.42-49
• /
• 2013

The camera motion is accompanied with the translation and/or the rotation of objects in frames of a video sequence. An unnecessary rotation of objects declines the quality of the moving pictures and in addition is a primary cause of the viewers' fatigue. In this paper, a novel method for correcting rotated frames in video sequences is presented, where the modified Mojette transform is applied to the motion-compensated area in each frame. The Mojette transform is one of discrete Radon transforms, and is modified for correcting the rotated frames as follows. First, the bin values in the Mojette transform are determined by using pixels on the projection line and the interpolation of pixels adjacent to the line. Second, the bin values are calculated only at some area determined by the motion estimation between current and reference frames. Finally, only one bin at each projection is computed for reducing the amount of the calculation in the Mojette transform. Through the simulation carried out on various test video sequences, it is shown that the proposed scheme has good performance for correcting the rotation of frames in moving pictures.

• English & American cultural studies
• /
• v.10 no.2
• /
• pp.231-266
• /
• 2010

This paper explores hybridity and hybridized relations that see mixings and crossings as the first moment of multicultural society. References to hybridity often assume that the definition and orientation of the term are located within biology; that is, hybridity constitutes a mixing of two formally discrete objects. In this regard, there seems to be a dialectical preoccupation with purity that goes hand in hand with discussions of hybridity. This dialectical reference to hybridity privileges whole, complete entities as the original instance before mixing, and in this way purity becomes reified. My analysis of hybridity foregrounds mixings that occur at the level of the social, not exclusively at the level of the biological. Hybridity contexts the myth of monoculturalism in the United States and foregrounds multiculturalism as the initial context around which difference has begun to be conceived. In destabilizing the myth of racial origins, this paper attempts to establish a retroactive construction of purity, which is historically, ideologically, and ethnically examined in Gloria Anzaldua's Borderlands/ La Frontera: The New Mestiza. Through this work composed of disparate narratives discourses, Anzaldua employs physical differences to ward off the colonial desire that has defined others as objects which are to be controlled. In this regard, this paper pursues the way that physical differences could be repositioned in terms of 'hybridity' that has been related to the cultural, historical, economical significations of borderlands. The space of borderlands is also a place marked psychologically; it will turn differences mobilized in the borderland into an acute consciousness that makes us recognize 'otherness' within ourselves. In sum, this paper attempts to elaborate the productive and creative interactions among disparate languages, classes, genders, and ideas, which will draw attention to their own interlocking nature.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.255-259
• /
• 2022

The new social reality emerging amid the global rise of communication links and integration processes acutely emphasizes the problems of communication in large and small social systems. The method of their communication becomes one of the keys to ensuring global security. It has become the mission of humanitarian education to prepare the younger generations for life in a changing world with no image of the future and increasing uncertainty. In psychological and pedagogical research, there is a growing scientific interest in the problems of interaction of the individual with the social environment. The mental trace of a person's practice in society shapes the experience of social interaction, which constitutes simultaneously the source, tool, and condition for the emergence and development of personality. The study outlines the methodological foundations for the study of individual experiences of social interaction. A hypothesis about the productivity of the functional matrix method is tested. Materials for the training of specialists in the humanities include interdisciplinary approaches to the study and transformation of the experience of social interaction and systematic methodology for the study of complex objects. Fundamental to the study is the systematic-dialectical method, and the matrix method is employed as the instrumental-technological method. The paper presents the results of a multidisciplinary overview of scientific literature concerning the essential characteristics and functions of social interaction and the respective experience. The overview points to the fragmented nature of scientific understanding of the elements of experience outside its integrity and systemic properties. Based on the formula "personality interacts with the social environment", the study presents an algorithm for the application of a systematic methodology for the study of complex objects, which made it possible to identify the system parameters of experience at three levels of cognition and develop the reference structural and functional matrices for the didactic system of its pedagogical enrichment.

• Economic and Environmental Geology
• /
• v.57 no.1
• /
• pp.17-23
• /
• 2024

Ground penetrating radar (GPR) survey is a geophysical method that utilizes electromagnetic waves reflecting from a boundary where the electromagnetic property changes. As the frequency of the antenna is about 25 MHz ~ 1 GHz, it is effective to acquire high resolution images of underground pipe, artificial structure, underground cavity, and underground structure. In this study, we analyzed the change of signals reflected from the same underground objects according to the arrangement of transceiver antennas used in ground penetrating radar survey. The antenna used in the experiment was 200 MHz, and the survey was performed in the vertical direction across the sewer and the parallel direction along the sewer to the sewer buried under the road, respectively. A total of five antenna array methods were applied to the survey. The most used arrangement is when the transmitting and receiving antennas are all perpendicular to the survey line (PR-BD). The PR-BD arrangement is effective when the object underground is a horizontal reflector with an angle of less than 30°, such as the sewer under investigation. In this case study, it was confirmed that the transmitter and receiver antennas perpendicular to the survey line (PR-BD) are the most effective way to show the underground structure. In addition, in the case where the transmitting and receiving antennas are orthogonal to each other (XPOL), no specific reflected wave was observed in both experiments measured across or parallel to the sewer. Therefore, in the case of detecting undiscovered objects in the underground, the PR-BD array method in which the transmitting and receiving antennas are aligned in the direction perpendicular to the survey line taken as a reference and the XPOL method in which the transmitting and receiving antennas are orthogonal to each other are all used, it can be effective to apply both of the above arrangements after setting the direction to 45° and 135°.

• Korean Journal of Remote Sensing
• /
• v.33 no.2
• /
• pp.231-242
• /
• 2017

Monitoring of facilities such as roads, dams and bridges is important for their long-term sustainable usage. It has usually suffered with safety and cost problems, which makes more frequent monitoring difficult. As an efficient and economicalsolution to these problems, one may consider the use of smartphone to capture the status of the facilities. To derive quantitative analysis results with the smartphone images for facility monitoring, one should first rectify the images in a way as automatic and economical as possible. In thisstudy, we propose such a rectification method, which rectifiessmartphone images acquired from arbitrary locations based on reference images.In the proposed method, we determine the camera extrinsic parameters of each smartphone images using the reference imagesrather than ground control points, and project the image to the target surface of the facility based on the determined camera parameters. The method were applied to test data acquired from a small dam toward water-area facility monitoring. The experimental results showed that the camera extrinsic parameters were determined with the accuracy of 5 cm and $0.28^{\circ}$ in the position and attitude. The accuracy of the distance measured from the rectified image was evaluated to 10 cm. With the rectified images, one can accurately determine the location and length of the target objects required for facility monitoring.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.8
• /
• pp.431-439
• /
• 2002

Due to the recent development of graphics hardware, real-time rendering of complex scenes is still a challenging task. As results of researches on image based rendering, the rendering schemes based on post-rendering 3D warping have been proposed. In general, these methods produce good rendering results. However, they are not appropriate for real-time rendering since it is not easy to accelerate the time-consuming algorithms within graphics subsystem. As an attempt to resolve this problem of the post-rendering 3D warping technique, we present a new real-time scheme based on projective texture. In our method, two reference images obtained by rendering complicated objects at two consecutive points of time are used. Rendering images of high quality for intermediate points of time are obtained by projecting the reference images onto a simplified object, and then blending the resulting images. Our technique will be effectively used in developing real-time graphics applications such as 3D games and virtual reality software and so on.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1460-1463
• /
• 2003

In this study, plastic detection technique was developed, applying remote sensing technology as a method to extract plastic wastes, which is one of the big causes of concern contributing to environmental destruction. It is possible to extract areas where plastic (including polypropylene and polyethylene) wastes are prominent, using ASTER data by taking advantage of its absorptive characteristics of ASTER/SWIR bands. The algorithm is applicable to define large industrial wastes disposal sites and areas where plastic greenhouses are concentrated. However, the detection technique with ASTER/SWIR data has some research tasks to be tackled, which includes a partial secretion of reference spectral, depending on some conditions of plastic wastes and a detection error in a region mixed with vegetations and waters. Following results were obtained after making comparisons between several detection methods and plastic wastes in different conditions; (a)'spectral extraction method' was suitable for areas where plastic wastes exist separated from other objects, such as coastal areas where plastic wastes drifted ashore. (single plastic spectral was used as a reference for the 'spectral extraction method') (b)On the other hand, the 'spectral extraction method' was not suitable for sites where plastic wastes are mixed with vegetation and soil. After making comparison of the processing results of a mixed area, it was found that applying both 'separation method' using un-mixing and ‘spectral extraction method’ with NDVI masked is the most appropriate method to extract plastic wastes. Also, we have investigated the possibility of reducing the influence of vegetation and water, using ASTER/TIR, and successfully extracted some places with plastics. As a conclusion, we have summarized the relationship between detection techniques and conditions of plastic wastes and propose the practical application of remote sensing technology to the extraction of plastic wastes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1548-1562
• /
• 2003

This paper is the first of several companion papers which compare the methods of Air-fuel ratio determination. There are many methods which calculate Air-Fuel ratio from exhaust emission. Most of them are based on the simple chemical equations, which use balance of atom, and the error of the calculation is negligible as far as the instrumentation accuracy is guaranteed. They assume homogeneous mixture and complete combustion to the extent of oxygen availability. Because of these simple assumptions, they cannot offer the information about the fuel distribution state and the malfunction of instrument. For these limitations, Eltinge offered new one based on stricter mathematical model. This result coincides with the others very well and gives more information about the mixture state and instrumentation. Consequently this might be a general solution for Air-fuel ratio determination and exhaust composition. The objects of the calculation, however, were not commercial fuels except gasoline and the compensation method of unburned hydrocarbon was not appropriate to recent analyzer. Moreover he did not consider the fuel which contains oxygen, such as methanol, ethanol and blend of gasoline-alcohol. In this paper, Eltinge chart is expanded to the arbitrary fuel composition as the reference exhaust compositions for the purpose of further discussions about Air-fuel ratio determination methods and the charts fur gasoline, diesel, methanol, M85, liquefied petroleum gas(LPG), natural gas(NG), propane, butane are illustrated.

• Journal of Broadcast Engineering
• /
• v.7 no.3
• /
• pp.248-261
• /
• 2002

In this paper, we proposed a new 3-dimensional(3-D) object-tracking algorithm that can control a stereo camera using a variable window mask supported by which uses ,B-D information and an optical BPEJTC. Hence, three-dimensional information characteristics of a stereo vision system, distance information from the stereo camera to the tracking object. can be easily acquired through the elements of a stereo vision system. and with this information, we can extract an area of the tracking object by varying window masks. This extractive area of the tracking object is used as the next updated reference image. furthermore, by carrying out an optical BPEJTC between a reference image and a stereo input image the coordinates of the tracking objects location can be acquired, and with this value a 3-D object tracking can be accomplished through manipulation of the convergence angie and a pan/tilt of a stereo camera. From the experimental results, the proposed algorithm was found to be able to the execute 3-D object tracking by extracting the area of the target object from an input image that is independent of the background noise in the stereo input image. Moreover a possible implementation of a 3-D tele-working or an adaptive 3-D object tracker, using the proposed algorithm is suggested.

• The KIPS Transactions:PartB
• /
• v.13B no.5 s.108
• /
• pp.499-506
• /
• 2006

This Paper describes a fast and stable camera pose estimation method for real-time augmented reality systems. From the feature tracking results of a marker on a single frame, we estimate the camera rotation matrix and the translation vector. For the camera pose estimation, we use the shape factorization method based on the scaled orthographic Projection model. In the scaled orthographic factorization method, all feature points of an object are assumed roughly at the same distance from the camera, which means the selected reference point and the object shape affect the accuracy of the estimation. This paper proposes a flexible and stable selection method for the reference point. Based on the proposed method, we implemented a video augmentation system that inserts virtual 3D objects into the input video frames. Experimental results showed that the proposed camera pose estimation method is fast and robust relative to the previous methods and it is applicable to various augmented reality applications.